Bellfires VIEW BELL YORK 3 CF Leitfaden
INSTALLATION INSTRUCTIONS &
MANUAL FOR MAINTENANCE
VIEW BELL
YORK 3 CF/LF
Gas •res with closed combustion system
This document is an essential part of your gas •re.
Read it carefully before installation and maintenance of the
gas •re and keep it in a safe place!
Bell•res wishes you many cosy evenings with your new Bell•res gas •re
Serial number:
Production date:
3
Bellfires English
Installation instructions
BELLFIRES GAS FIRE WITH CLOSED COMBUSTION SYSTEM:
View Bell York 3 CF (Centre Fire) (VWBYK3 CF)
View Bell York 3 LF (Line Fire) (VWBYK3 LF)
4
Bellfires English
Installation instructions
IMPORTANT
These Installation Instructions form part of the documentation pack supplied
with the appliance.
The complete documentation, necessary for the installation of the appliance,
consists of:
1. INSTALLATION INSTRUCTIONS & MANUAL FOR MAINTENANCE
2. AVAILABLE COMPONENTS CONCENTRIC FLUE-SYSTEMS FOR
BELLFIRES GAS FIRES WITH CLOSED COMBUSTION SYSTEM
3. INSTRUCTIONS FOR USE & MANUAL DAILY MAINTENANCE
4. ‘PREMIUM FIRE’ SUPPLEMENT INSTALLATION INSTRUCTIONS &
MAINTENANCE MANUAL (If the appliance is equipped with a ‘PREMIUM
FIRE’ burner)
5
Bellfires English
Installation instructions
CONTENTS
Page
1. INSTALLATION INSTRUCTIONS .............................................................. 7
2. MAINTENANCE ......................................................................................... 55
3. FAULTS ...................................................................................................... 57
4. DISMANTLING / ASSEMBLING OF THE GLASS
.
...
..............................
... 58
5. DIAGRAM ELECTRICITY AND GAS ...........................
.................
............ 63
6. DIMENSIONS ............................................................................................ 64
7. TECHNICAL DETAILS/REGULATIONS .................................................... 67
8. REPLACEMENT PARTS LIST .................................................................. 71
9. DISPOSAL OF PACKAGING AND APPLIANCE ....................................... 74
The installation must only be carried out by a
“Gas Safe Register” registered installation engineer.
IMPORTANT
6
Bellfires English
Installation instructions
7
Bellfires English
Installation instructions
1 INSTALLATION INSTRUCTIONS
1.1 GENERAL
The gas fire must be positioned and connected as a “room sealed system” (balance
flue) appliance by a “Gas Safe Register” registered gas installation engineer in
accordance with the following installation instructions, nationally and locally applicable
regulations (see “Technical Details/ Regulations” at the rear of this manual). If you have
any queries regarding the installation, please consult your local gas company.
Important: Before beginning the installation, check that the details on the
rating plate correspond to the gas type and pressure to which
the appliance will be connected.
The appliance is supplied with a “Centre Fire” or “Line Fire” double burner, as ordered.
These burners each have their own specific flame image which is defined by the
perforation pattern in the burner cover. See Chapter 5 and the Instructions for use.
The appliance is factory set to the correct nominal heat input. The pilot light is set to the
correct level of consumption.
Depending on the requested version, the appliance will be delivered from the factory
with a Ø100 mm - Ø150 mm or Ø130 mm - Ø200 mm concentric connection for
extracting the flue gases and supply of combustion air.
It is possible to install the gas fire with either a wall or roof outlet.
The roof connection must be carried out using the concentric flue system Ø100 mm -
Ø150 mm. The fumes are exhausted naturally to the outside environment through the
inner Ø100 mm pipe whereas the combustion air supply passes between the Ø100 mm
and Ø150 mm pipes.
The wall connection must be carried out using the concentric flue system Ø130 mm -
Ø200 mm. The flue gases are evacuated outside by means of natural draft through the
internal pipe of Ø130 mm, whereas the combustion air is supplied between the pipes of
Ø130 mm and Ø200 mm. The wall outlet itself is, depending on the concentric flue gas
system configuration, Ø100 mm - Ø150 mm or Ø130 mm - Ø200 mm. (In some cases,
with a wall connection, a complete concentric flue system Ø100 mm - Ø150 mm is also
possible (see Chapter 1.6.1).)
The gas fire can be installed in a completely sealed or mechanically ventilated house
without extra ventilation and/or fume extraction.
The gas fire can be installed as an insertion into an existing open fire place or as
a built-in appliance in a new fire place.
8
Bellfires English
Installation instructions
In order to prevent the fireplace heating up excessively, it must be properly
ventilated by installing vents at the top and bottom of the fireplace.
The appliance can be fitted with a convection package as an optional extra. This is a
“convection jacket” (convection casing) for around and above the appliance, two flexible
aluminium pipes and two built-in convection vents. This enables hot air to be circulated
into the room.
If required, two additional convector grills can be fitted (= 1x extra convection set).
If an existing chimney is to be used, please consult your installer first. If the chimney
was previously used for a wood or coal fire, then it should be cleaned by an expert.
1.2 CONCENTRIC FLUE SYSTEMS Ø100 MM - Ø150 MM AND
Ø130 MM - Ø200 MM: • Bellfires - Muelink & Grol system
• Poujoulat - DUOGAS system
• Ontop - Metaloterm US system
• Jeremias/STB - H-Twin system (STB = Schoorsteen-
techniek Brummen NL)
• Jeremias - TWIN-GAS systeem
The gas fire, in combination with the concentric flue system [Ø100 mm - Ø150 mm]
(rigid and/or flexible)
for the brand types mentioned above, has been approved in
accordance with the European CE-norm for gas appliances and may therefore be used
only with these systems.
The permitted components for these systems are listed in instructions enclosed:
AVAILABLE COMPONENTS CONCENTRIC FLUE-SYSTEMS FOR BELLFIRES GAS
FIRES WITH CLOSED COMBUSTION SYSTEM. The guarantee on the
appliance lapses if it is installed, fully or partially, with other components or a different
flue system.
The concentric flue [Ø100 mm - Ø150 mm] systems can be used with either a
newly-built or existing chimney.
IMPORTANT
Observe the installation instructions, which are supplied
with the components of the concentric flue system.
9
Bellfires English
Installation instructions
N.B. If any part is missing, please contact your dealer.
1.3 INCLUDED
1.4 OPTIONS AND ACCESSORIES
The following options and accessories can be supplied by your dealer:
Set documentation - Installation instructions & Manual for maintenance
- Instructions for Concentric Components
- Instructions for use & Manual daily maintenance
Attributes - Ceramic log set, or marble pebbles white
or marble pebbles grey
Part no Option
Convection package View Bell York 3
344473 • 1x Convection casing
344472 • 1x Convection top plate
312829 • 1x Convection set General
336584 Mantel iron VWBYK3
344613 10 cm Frame 4 sided VWBYK3 (incl. mantel iron VWBYK3)
344222 Black mirror rear wall CBYK3 L/R / VWBYK3
344265 Fins rear wall CBYK3 L/R / VWBYK3
337670 Set of high adjustable feet (incl. adapter) 4 pieces
10
Bellfires English
Installation instructions
Part no Accessorie
302092 Receiver adapter 6 VDC
312829 Convection set General: (for convection air extraction)
302188 • 1x Flexible aluminium pipe Ø125 mm, L= 3 m (max.)
310178 • 2x Fitting box 135 x 135 mm
309872 • 2x Convection exit grid, white, 145 x 145 mm
304040 • 4x Hose clamp Ø125 mm
329874 Set carrying brackets (2 pieces)
3........ Bellfires (M&G) concentric flue system(*)
3........ Poujoulat (DUOGAS) concentric flue system(*)
3........ Ontop (Metaloterm US) concentric flue system(*)
3....... Jeremias/STB - H-TWIN concentric flue system(*)
3....... Jeremias - TWIN-GAS concentric flue system(*)
(*) Please refer to the instructions enclosed:
CONCENTRIC COMPONENTS SUITABLE
FOR THE INSTALLATION OF A BELLFIRES
GAS FIRE WITH CLOSED COMBUSTION
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Bellfires Kamin im Innenbereich Handbücher
Bellfires
Bellfires horizon bell xl 3 cf Bedienungsanleitung
Bellfires
Bellfires VIEW BELL TOPSHAM 3 CF Bedienungsanleitung
Bellfires
Bellfires VENTO CLASSIC SMALL Installations- und Betriebshandbuch
Bellfires
Bellfires UNICA-2 40 Installations- und Betriebshandbuch
Bellfires
Bellfires Wi-fi box Bedienungsanleitung
Bellfires
Bellfires SMART BELL 80-70 PF Installations- und Betriebshandbuch
Bellfires
Bellfires Smart Bell 80 MF Handbuch
Bellfires
Bellfires VIEW BELL TOPSHAM 3 CF Bedienungsanleitung
Bellfires
Bellfires BSV 19 Bedienungsanleitung
Bellfires
Bellfires SLIDE BELL 55 - 55 Einrichtungshandbuch
Bellfires
Bellfires Smart Bell Panorama 45/59 MF Handbuch
Bellfires
Bellfires ROOM DIVIDER MEDIUM 3 CF Bedienungsanleitung
Bellfires
Bellfires Smart Bell 65 MF Handbuch
Bellfires
Bellfires HORIZON BELL XS 3 CF Leitfaden
Bellfires
Bellfires SMART BELL 80 PF Leitfaden
Bellfires
Bellfires BEL VBMT-3NG-SB Bedienungsanleitung
Bellfires
Bellfires Smart Bell 60 MF Bedienungsanleitung
Bellfires
Bellfires HORIZON BELL XXL Einrichtungshandbuch
Bellfires
Bellfires DERBY LARGE 3 CF Bedienungsanleitung
Bellfires
Bellfires Smart Bell Panorama 45/45 MF Betriebsanleitung
