Bellini BBQRA123X Montageanleitung
GSM Retail Australia Pty Ltd ABN: 53 007 582 475
For Warranty and technical queries: 1300 373 199 Aust OR0800 764 912 NZ www.belliniappliances.com.au
Model: BBQRA123X Fineline: 5103011 120cm BBQ Rangehood
INSTALLATION & OPERATION
INSTRUCTIONS
120cm BBQ Range hood
Model No.
BBQRA123X FINELINE: 5103011 AUS Only
V10 Sep20
Thank you
Thank you for choosing Bellini Appliances.
Bellini prides itself on ‘affordable living’ making sure there is
no compromise in your favourite room … The Kitchen
All Bellini appliances carry a 3 year In Home warranty,
be sure to retain your installation and user manual and
receipt.
For all warranty and technical queries please contact
1300 373 199
GSM Retail Australia Pty Ltd ABN: 53 007 582 475
For Warranty and technical queries: 1300 373 199 Aust OR0800 764 912 NZ www.belliniappliances.com.au
Model: BBQRA123X Fineline: 5103011 120cm BBQ Rangehood
Content
Safety instructions----------------------------- 2
Product description---------------------------- 4
Installation----------------------------------------5
Start using your Range hood-----------------8
Maintenance and cleaning -------------------9
Warranty------------------------------------------10
GSM Retail Australia Pty Ltd ABN: 53 007 582 475
For Warranty and technical queries: 1300 373 199 Aust OR0800 764 912 NZ www.belliniappliances.com.au
Model: BBQRA123X Fineline: 5103011 120cm BBQ Rangehood
2
Safety instructions
This manual explains the proper installation and use of your rang e hood, please read it
carefully before using even if you are familiar with the product. The manual should be kept
in a safe place for future reference. In case of failure, only the Authorised Technical
Service may repair this range hood. Otherwise the guarantee will be null and void.
All Bellini Appliances are for domestic use only.
Never to do:
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
and mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Never carry out flamable cooking under the
appliance
The exhaust from the range hood must not be
discharged into any heating flue, which may carry
combustion products from other sources.
Do not leave lit gas burners exposed due to the risk
of fire.
Always to do:
Packaging materials (eg; polystyrene and
plastic items) must be kept out of reach of
babies or young children at all times due to
risk of suffocation.
Young children should be supervised to
ensure that they do not play with the
appliance.
Ensure the range hood is switched off before
carrying out maintenance, to avoid any
possibility of electric shock.
Filters must be removed every four weeks
(maximum) for cleaning to reduce the risk of
fire.
There must be adequate ventilation of the
room when the range hood is used at the
same time as appliances burning gas or other
fuels.
Always cover lit gas burners with pots or pans
when range hood is in use.
Always switch off gas burners before you
remove pots or pans.
If the supply cord is damaged, the cord must
be replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard
Plug must be accessible after installation.
3
Safety instructions
Never to do:
It is prohibited to fit the range hood over a solid fuel
stove
This appliance must not be connected to a chimney
or vent flue which is in use.
This appliance is not to be vented into the roof
cavity, must exit into open air.
Exhaust air must not be discharged into a wall
cavity, unless the cavity is designed for the purpose.
This appliance should not be connected to ducting
which ventilates rooms with fire places.
Always to do:
Attention should be given to ensure that any
applicable regulations concerning discharge
of exhaust air are fulfilled.
This appliance should be installed and
maintained by a suitably qualified and
competent person in accordance with the
relevant safety regulations.
Before connecting the appliance to the mains
supply, ensure that the voltage and frequency
details on the rating plate are consistent with
the source of supply.
This product must not be disposed together
with domestic waste. This product has to be
disposed at an authorised place for recycling
of electrical and electronic appliances.
By collecting and recycling waste, you help save natural
resources, and make sure the product is disposed in an
environmental friendly and healthy way.
4
Product description
Component list:
1. Chimney cover
2. Upper chimney retaining bracket
3. Upper decorative chimney (Inner)
4. Lower chimney retaining bracket
5. Lower decorative chimney (outer)
6. Flexible exhaust duct
7. Hood mount bracket
8. Main body
9. Baffle filter
Technical data:
Power supply: 220 – 240v,
50Hz Motor: 2 x 380W
Lights: 4 x 2W LED lamp
Length of power cord: 1.5m
Air outlet diameter: 150mm
Accessories
Description Picture QTY
User Manual 1
Upper chimney retaining bracket 1
Lower chimney retaining bracket 1
Hood mount bracket 1
Dynabolts (6 mm x 60mm) 4
Dry wall anchors plugs 7
Screw (ST4x8mm)
4
Screw (ST4x30mm) 2
Screw (ST4x40mm) 5
Flap
Strap
4
2
5
Installation and start using your range hood
Dimensions:
Installation Procedures:
Warning:
Check that the installatio n complies with the standa rds of local b uilding, gas and electrical authorities. Before
connecting to the mains supply ensure the mains vo ltage corresponds to the voltage on the applian ce rating
plate inside the range hood.
When installing the range hood, make sure you adhere to the minimum and maximum distances from the range
hood base to the cooktop hob surface.
Hints for exhaust duct installation
The following rules must be strictly followed to obtain optimal air extraction
Keep exhaust duct short and straight
Do not reduce the size or restrict exhaust duct
When using flexible duct always install the duct pulled taut to minimize pressure loss
Failure to observe these basic instructions will reduce the performance and increase noise levels of the
range hood
Ensure the exhau st duct ing sele cted for installati on compli es with relevant standards and is fire
retardant.
6
1. Using a spirit level, mark a vertical line on the wall (Central to the cook top installed below) to indicate the
centre location of the hood and a horizontal line where the hood base will be positioned. Drill holes as per
below drawing and insert dry wall anchor plugs into holes.
NOTE: The distance from the horizontal line to an electrical cooktop underneath must be minimum
of 650mm & 700mm for the gas cook top and a maximum height of 800mm (refer to table below).
*If the instructions of the hob specify a greater distance than the minimum above, then that shall be the minimum height for installation
Hood base Horizontal line
Vertical centre line
Top of hob
Minimum:
Electric and 650mm
Gas 700mm
Maximum:
800mm
312mm
195mm
4 x 6mm hol es for
mount bracket
3x4mm holes for
Lower chimney
retaining bracket
195mm 195mm
249mm
275mm
275mm
2. Once the installation height of hook,inside chimney bracket and safety hole is fixed according to the pic 1,
drill 6 φ11mm holes on the wall.
600
195
450
200
19 5
19 5
275 275
. Insert 7 pcs wall plugs into the holes of inside and outside chimney brackets as well as the safety hole.
Put 4 pcs M6*60 screws into the corresponding 4 holes for the hook and fix it on the wall.
Then use 2
pcs ST4*40mm screws to install the inside chimney bracket on the wall.
. Open and take down the 8 filters in order following the 3 steps
Hang the cooker hood on the hook.
Fasten ST4*30mm screws to the two safety holes on the cavity and fix the cooker hood. Note: The two
safety vents are positioned on the back housing, with diameter of 6mm. See pic 5.
Lay the expansion pipe to the two blower outlet, and fix the expansion pipe with a cable tie. See pic 6.
Put the inside chimney into the outside chimney,and hang the outside chimney bracket to the hole of
outside chimney. See pic 7.
Fix the outside chimney bracket on the wall with 3 pcs ST4*40 screws. See pic 8.
.
3
4
5.
6.
7.
8.
9.
pic 9
pic 8
pic 7
pic 6
pic 5
pic 4
See pic .
4
See
pic
pic
3
3.
pic pic 2
1
See pic .
2
8
Start using your range hood
O – off button, used for turning off the fans.
Speed –select speed to suit cooking conditions
Low – light frying/boiling
Medium – frying/wok cooking/heavy boiling
High – grilling, intensive frying and wok cooking
Lamp – Turn on/off light
10.Put the chimney on the cooker hood and be sure that the inside chimney can be adjusted the height in
it freely. Then lead the expansion pipe to outside. See pic 9.
11. Adjust the height of the inside chimney to the position of the inside chimney bracket and fix on it with
2 pcs ST4*8mm screws. See pic 10.
12. Install the inside chimney cover to the top of inside chimney with 2 pcs ST4*8mm screws. See pic 11.
pic 10 pic 11
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Bellini Dunstabzugshaube Handbücher
Bellini
Bellini BRA603SX2 Montageanleitung
Bellini
Bellini BR603GCX-1 Bedienungsanleitung
Bellini
Bellini BRA903SLX Montageanleitung
Bellini
Bellini 0229596 Montageanleitung
Bellini
Bellini BBQR123X Bedienungsanleitung
Bellini
Bellini BRA62SWP Bedienungsanleitung
Bellini
Bellini CRHR6W01 Bedienungsanleitung
Bellini
Bellini BDR603TFG Bedienungsanleitung
Bellini
Bellini BR603AX-F Montageanleitung
Bellini
Bellini BR603AX Bedienungsanleitung
Bellini
Bellini CRHR6W01 Bedienungsanleitung
Bellini
Bellini BDRA603TBX Montageanleitung
Bellini
Bellini BRA52UX Bedienungsanleitung
Bellini
Bellini BRA603GCX Montageanleitung
Bellini
Bellini BR603SPX-F Bedienungsanleitung
Bellini
Bellini BRA603SX-F Montageanleitung
Bellini
Bellini BRA603GCX2 Montageanleitung
Bellini
Bellini BRA603SX Bedienungsanleitung
Bellini
Bellini BRA603CPX Montageanleitung
Bellini
Bellini BR603GCX Bedienungsanleitung
