BEMIS Haven 5000 Bedienungsanleitung
OWNER'S MANUAL
2 3
TABLE OF CONTENTS
PRODUCT INFORMATION
Unit & Parts...........................................................................................................4
PRODUCT INSTALLATION
Seat Installation................................................................................................5
Remote Installation.......................................................................................8
PRODUCT OPERATION
Functions & Settings...................................................................................10
Maintenance.....................................................................................................14
Warranty................................................................................................................16
Specifications...................................................................................................18
4 5
UNIT & PARTS SEAT INSTALLATION
REMOTE
CONTROL
T-VALVE
(WITH RUBBER
GASKET)
1/2” CONVERSION
NUT (OPTIONAL)
BIDET HOSE
(1/2” to 1/2”)
TOILET HOSE
(7/8” to 3/8”)
CR2030 BUTTON
BATTERY (1pc)
CATCH
PLATE
INSTALL SCREW
ASSEMBLY
HAVEN BIDET SEAT
1. Attach Rubber Anchors 2. Attach the Mounting Plate
3. Attach the Bidet Seat 4. Seat Sensor
Remove the existing toilet seat and
insert the rubber anchors into the
mounting holes.
Slide the bidet seat all the way
on to the catch plate. You will hear
a click once the product is securely
mounted to the catch plate.
Place the catch plate and guides
over the mounting holes. Insert the
mounting screw and secure the catch
plate to the toilet.
This appliance is equipped with a
seat sensor and will not function
unless it is occupied.
6 7
SEAT INSTALLATION (CONT.)
5. Connect the Water Hose
1. Close the water shutoff valve.
2. Flush the toilet to empty the tank.
3. Remove the existing water supply hose from the tank.
4. Install the t-valve on to the tank. Ensure the rubber
gasket is properly seated inside the T-Valve.
5. Connect the 7/8” water supply hose to the water shutoff valve
and t-valve. If necessary, use the included conversion nut.
6. Connect the 1/2” water supply hose to the bidet seat and t-valve.
7. Open the water shutoff valve.
8. Check for any leaking or dripping.
•Plug the power cord into
a 120V power outlet.
•Please contact our service
center at 847-458-2334 if you
have any questions.
6. Plug it in!
8 9
2. Remote Pairing
(Follow these instructions if the bidet
seat is not responding to the remote)
a. Unplug the bidet seat.
b. Press and hold the “STOP” button
on the remote until the indicator
lights flash.
c. Hold the remote close to the bidet
seat and plug it back in.
d. The indicator lights will stop
flashing when the remote has
successfully paired.
REMOTE INSTALLATION
a. Drill two 6mm holes on the wall that line up with the remote bracket.
b. Install the wall anchors in the newly drilled holes with a hammer.
c. Place the remote bracket over the wall anchors.
d. Use the provided screws to attach the remote control bracket to the wall.
e. Place the remote control on the bracket.
1. Installation
10 11
FUNCTIONS & SETTINGS
OPEN/CLOSE LID
Press to open or close the lid.
Turn On The Seat
•Press the Power Button on the side of the seat.
Pre Nozzle Rinse
•As soon as the seat sensor is activated, a pre-rinse cycle
will begin. This process rinses the nozzle in preparation for a
wash function. Water will drain into the bowl during this time.
Turn Sounds On/Off
•Press and hold the night light button for 3 seconds
to turn beeping sounds on/off.
OPEN/CLOSE SEAT
Press to open or close the seat.
AUTO OPEN ON/OFF
Press to turn the auto open on/off
AUTO
Press to activate a rear wash for 90 seconds, followed by the dryer function for
4 minutes. Press ing the Auto button a second time during the wash will skip
ahead to the dryer function.
FRONT
Press to activate the oscillating front wash.
Press again to turn off oscillation.
REAR
Press to activate the oscillating rear wash.
Press again to turn off oscillation.
STOP
Press to stop any operations.
DRYER
Press to activate the warm air dryer.
Press again to adjust the fan speed.
12 13
ULTRAVIOLET STERILIZATION
This feature automatically activates after a wash cycle. The seat cannot be used
during this time. This feature can only be activated when the seat is not occupied.
POWER/STOP BUTTON
Short press to power on or long press to enter standby mode.
Short press while powered on to stop any operations.
•When the power button is blue, it is in UV sterilization mode.
•When the power button is red, it is in the normal power-on state.
(both when ready to use or in use)
AIR TEMP | WATER TEMP. | SEAT TEMP.
Press the corresponding buttons to adjust the temperature settings on each feature.
•Low - Blue
•Medium - Purple
•High - Red
DYNAMIC STREAM
Press during a wash to quickly alternate between hot and cold water.
This feature assists in stimulating bowel movements.
NIGHT LIGHT
Press to turn the night light on/off.
NOZZLE CLEAN
Press to extend the nozzle for manual cleaning.
This feature can only be activated when the seat is not occupied.
WATER PRESSURE
The water pressure starts off low. Press the + or - buttons to adjust the
water pressure accordingly.
NOZZLE POSITION
Press the arrow keys to adjust the position of the nozzle accordingly.
FUNCTIONS & SETTINGS (CONT.)
14 15
MAINTENANCE
Cleaning the Unit
•Disconnect the power plug and wipe the seat with a dry
or damp cloth using a neutral cleaning solution.
•Do not spray water directly on this product.
•Do not use harsh cleaning chemicals, as those can cause
damage or discoloration.
Extended Travel
When the seat will not be used for more than a few days, it is
recommended to unplug the unit and turn off the water shutoff valve.
16 17
WARRANTY
2 YEAR WARRANTY
Your product is warranted against defects in materials or workmanship for (2) years
from the date of original purchase. Defective parts or a defective products returned
to Bio Bidet Innovation LLC will be repaired with new or comparable rebuilt parts or
exchanged for a refurbished product as determined by Bio Bidet Innovation LLC in
their sole discretion.
This limited warranty given by Bio Bidet Innovation LLC covers all defects encountered
in normal product use, and do not apply in the following cases:
1. Loss of or damage to product due to abuse, misuse, tampering. Mishandling,
improper packaging by you, alteration or fail to follow operating instructions.
2. Use of parts or supplies (other than those by Bio Bidet Innovation LLC dealers
that cause damage to product.
3. Replacement of discolored or stained parts caused by chlorine, bleach,
ammonia and other chemicals, cleaning supplies, oxidation, normal wear
and tear.
4. Damage to or malfunction of the unit as a result of improper and
negligent installation.
5. Any and all damages to plumbing, walls, floors, ceiling and personal properties
resulting from water leaks or breakage. The product must be used at the user’s
own risk. Therefore, the owner hereby releases the manufacturer and distributor
from any and all claims for damages where the above condition exits.
No implied warranty, including any implied warranty of merchantability or fitness or
a particular purpose, applies to Bio Bidet Innovation LLC bidet after the applicable
period of the express limited warranty stated above, and no other express warranty
or guarantee, except as mentioned above, given by any person or entity with respect
to Bio Bidet Innovation LLC shall bind Bio Bidet Innovation LLC, (Some States and
provinces do not allow limitations on how long an implied warranty, so the above
limitation may not apply to you) Bio Bidet Innovation LLC shall not be liable for
revenues or profits, inconvenience, expense for substitute equipment or service, or
any other special, incidental or consequential damages caused by the use or misuse
of, or inability to use product, regardless of the possibility and foresee-ability of
such damages. In no event shall recovery of any kind against Bio Bidet Innovation
LLC be greater in amount than the purchase price of the product and causing the
alleged damage. Without limiting the foregoing, you assume all risk and liability for
loss, damage or injury to you and your property and to others and their property
arising out of use or misuse of, or inability to use, the product not caused directly by
the negligence or Bio Bidet Innovation LLC. This limited warranty shall not extend to
anyone other than the original purchaser of the product.
18 19
SPECIFICATIONS
Model Haven 5000 Rated Power 1050W
Rated
Voltage 120V, 60Hz Waterproof
Guide IPX4
Seat Temp Off /
93.2~102.2°F Water Temp. Off /
95 ~ 102.2°F
Product
Dimensions
20.79” x 16.38”
x 5.59”
Ambient Temp
Requirement 39.2 ~ 104° F
Water
Heating Instant Air Temp Off / 95-131°F
Warning
•The product must be reliably grounded.
Otherwise, electric shock may be caused by fault or short circuit.
When in doubt, contact the electrical installation company.
•Do not touch or plug the power plug with wet hands.
Otherwise there is the risk of electric shock.
•Do not use defective power outlets or damaged power plugs.
Otherwise, poor contact and damage will lead to electric shock or fire hazard.
•Please use the power socket within the specified range (ac 120V±10%, maximum current above 10A).
Otherwise easy to cause fire, electric shock.
•Do not pull, break, bend or twist the power cord at will,
stretch, crimp, bundle, load bearing or over squeeze.
Otherwise, damaged power lines may lead to electric shock or fire.
•If the power cord is damaged, it must be replaced by a professional from
the manufacturer, its maintenance department or similar department to avoid danger.
Otherwise easy to cause electric shock, fire.
•Do not use industrial water or contaminated water sources.
Otherwise it is likely to cause cystitis, dermatitis and internal corrosion of
machinery will cause electric shock, fire.
•Please avoid installation in damp and easily soaked bathroom.
Do not spray water on the product or rinse it with water, in case of internal
water flooding and loss. Otherwise easy to cause electric shock, fire.
•Do not put lit cigarettes and other incendiary materials into the intelligent toilet lid.
Otherwise fire is likely to happen.
•Do not use in lightning weather (in the vicinity of lightning, please unplug the power plug).
Otherwise, an accident or malfunction may occur.
•In case of damage to the seat and cover plate, in order to avoid danger, please be sure to remove
the power plug, turn off the water source, and contact the local dealer for replacement.
Otherwise easy to happen electric shock, fire danger.
•Please pull out the power plug regularly and wipe the dust on the power plug with dry cloth.
Otherwise, when the insulation is poor, it will cause a fire.
Inhaltsverzeichnis
Andere BEMIS Toilette Handbücher
BEMIS
BEMIS HAVEN 3000 Bedienungsanleitung
BEMIS
BEMIS bioBidet USPA 6800U Bedienungsanleitung
BEMIS
BEMIS BioBidet BB-600R Bedienungsanleitung
BEMIS
BEMIS bioBidet Prodigy P700 Bedienungsanleitung
BEMIS
BEMIS BIOBIDET SLIM TWO Bedienungsanleitung
BEMIS
BEMIS WELLSPRING 100 Bedienungsanleitung
BEMIS
BEMIS SANCTUARY 5000 Bedienungsanleitung
BEMIS
BEMIS NextStep Bedienungsanleitung
BEMIS
BEMIS bioBidet BB800 Bedienungsanleitung
BEMIS
BEMIS bioBidet PRODIGY P500 Bedienungsanleitung
BEMIS
BEMIS bioBidet Bliss BB1700 Bedienungsanleitung
BEMIS
BEMIS bioBidet Discovery DLS Leitfaden
BEMIS
BEMIS bioBidet ULTIMATE 770 Bedienungsanleitung
BEMIS
BEMIS bioBidet SLIM THREE Bedienungsanleitung
BEMIS
BEMIS BIOBIDET BB-550 Bedienungsanleitung
BEMIS
BEMIS bioBidet UB-4800 Bedienungsanleitung
BEMIS
BEMIS carrara & matta Canyon STA-TITE Bedienungsanleitung
BEMIS
BEMIS BioBidet SLIM 3 Bedienungsanleitung
BEMIS
BEMIS bioBidet HD-7000 Bedienungsanleitung
BEMIS
BEMIS carrara & matta Smart Lift STA-TITE Bedienungsanleitung
Beliebte Toilette Handbücher anderer Marken
Better Bathrooms
Better Bathrooms BUN/BeBa 27555/78725 Bedienungsanleitung
American Standard
American Standard CONCEPT Cube TF-2704 Bedienungsanleitung
BIOLAN
BIOLAN ECO Stücklistenhandbuch
Thetford
Thetford C260 Series Bedienungsanleitung
KELISS
KELISS T162A Series Bedienungsanleitung
Kohler
Kohler K-22241K Montageanleitung
