Benchmark 1280-002 Bedienungsanleitung

READ ALL INSTRUCTIONS BEFORE FIRST USE.

KEEP THIS MANUAL FOR FUTURE REFERENCE.

KEEP AWAY FROM CHILDREN.

WEAR CSA APPROVED

EYE PROTECTION

WEAR EAR

PROTECTION

WEAR A

FACE MASK

3042597

JD2480UH

5 year limited warranty on tool

OSCILLATING

MULTI-TOOL KIT

PRODUCT SPECIFICATIONS

OSCILLATING MULTI-TOOL KIT

Rating 120 V, 60 Hz AC

Amperes 3.0

Variable speed 11,000–21,000 OPM (no load)

Oscillating angle 3.2°

Weight 5 lb 2 oz (2.3 kg)

NEED ASSISTANCE?

Call us on our toll- free customer support line:

1-866-349-8665 (Monday through Friday 9am – 5pm Eastern Standard Time)

• Technical questions

• Replacement parts

• Parts missing from package

1280-002

OSCILLATING MULTI-TOOL KIT

TABLE OF CONTENTS

Product Speciﬁcations................................................................................... 1

Table of Contents........................................................................................... 2

General Safety Warnings ................................................................................ 3

Eye, Ear & Lung Protection............................................................................. 3

Power Tool Safety........................................................................................... 3

General Safety Rules...................................................................................... 3

Electrical Safety and Extension Cord Guidelines ............................................. 4

Work Area Safety ........................................................................................... 4

Electrical Safety............................................................................................. 4

Personal Safety ............................................................................................. 5

Power Tool Use and Care................................................................................ 5

Service ......................................................................................................... 6

Speciﬁc Safety Rules for Oscillating tools ....................................................... 6

Symbols......................................................................................................... 7

Know your Oscillating Tool ............................................................................. 8

Assembly and Operating ................................................................................ 9

Installing Accessories..................................................................................... 9

Installing Sandpaper .................................................................................... 10

.............................................................................................. 10

Led Work Light............................................................................................. 10

Speed Control Wheel ................................................................................... 11

Flush Cutting a Door Jamb and Casing for Installing Flooring......................... 12

Cutting a Hole in Wood Flooring to Install a Heating Vent .............................. 13

Cutting a Hole in Drywall for Installing an Electrical Outlet Box...................... 14

Using the Detail Sander Attachment............................................................. 15

Using the Scraper Blade............................................................................... 15

Maintenance ............................................................................................... 16

Exploded View ............................................................................................. 19

Parts List ..................................................................................................... 20

Warranty ..................................................................................................... 22

GENERAL SAFETY WARNINGS

WARNING: Before using this tool or any of its accessories, read this manual

and follow all Safety Rules and Operating Instructions. The important precautions,

safeguards and instructions appearing in this manual are not meant to cover all

possible situations. It must be understood that common sense and caution are

factors which cannot be built into the product.

EYE, EAR & LUNG PROTECTION

SYMBOL MEANING

ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH CSA

Z94.3 or ANSI SAFETY STANDARD Z87.1

FLYING DEBRIS can cause permanent eye damage. Prescription

eyeglasses ARE NOT a replacement for proper eye protection.

Non-compliant eyewear can cause serious injury if broken during

the operation of a power tool.

Use hearing protection, particularly during extended periods of

operation of the tool, or if the operation is noisy.

WEAR A DUST MASK THAT IS DESIGNED TO BE USED WHEN

OPERATING A POWER TOOL IN A DUSTY ENVIRONMENT.

Dust that is created by power sanding, sawing, grinding, drilling, and

other construction activities may contain chemicals that are known

to cause cancer, birth defects, or other genetic abnormalities. These

chemicals include:

• Lead from lead-based paints

• Crystalline silica from bricks, cement, and other masonry products

• Arsenic and chromium from chemically treated lumber.

The level of risk from exposure to these chemicals varies, according to

how often this type of work is performed. In order to reduce exposure

to these chemicals, work in a well-ventilated area, and use approved

safety equipment, such as a dust mask that is speciﬁcally designed to

ﬁlter out microscopic particles.

To avoid electrical hazards, ﬁre hazards or damage to the tool,

use proper circuit protection.

This tool is wired at the factory for 120 V AC operations. It must be

connected to a 120 V AC, 15 A circuit that is protected by a time-

delayed fuse or circuit breaker. To avoid shock or ﬁre, replace power

cord immediately if it is worn, cut or damaged in any way.

1280-002

OSCILLATING MULTI-TOOL KIT

VOLTS Total Length of Cord in Feet (meters)

120V 25' (7.5 m) 50' (15 m) 100' (30 m) 150' (45m)

240V 50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4)

Amperage rate American Wire Gauge

More than Not more than

0 6 18 16 16 14

6 10 18 16 14 12

10 12 16 16 14 12

12 16 14 12 Not Recommended

GENERAL POWER TOOL SAFETY WARNINGS

WARNING: Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool”

in the warnings refers to your mains operated(corded) power tool or battery-

operated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark are as invite accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power tools create sparks which may ignite the

dust or fumes.

• Keep children and bystanders away while operating a power tool. Distractions

can cause you to lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools. Unmodiﬁed

plugs and matching outlets will reduce risk of electric shock.

• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,

ranges and refrigerator. There is an increased risk of electric shock if your body

is earthed or grounded.

• Do not expose power tools to rain or wet conditions. Water entering a power tool

will increase the risk of electric shock.

• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging

the power tool. Keep cord away from heat, oil, sharp edges and moving parts.

Damaged or entangled cords increase the risk of electric shock.

• When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of

electric shock.

•

If operating a power tool in a damp location is unavoidable, use a residual current

device (RCD) protected supply. Use of an RCD reduces the risk of

electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating

a power tool. Do not use a power tool while you are tired or under the inﬂuence

of drugs, alcohol or medication. A moment of inattention while operating power

tools may result in serious personal injury.

• Use personal protective equipment. Always wear eye protection. Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce personal injuries.

•

connecting to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools with your ﬁnger on the switch or energizing power tools

that have the switch on invites accidents.

• Remove any adjusting key or wrench before turning the power tool on.

A wrench or a key left attached to a rotating part of the power tool may result

in personal injury.

• Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewellery or long hair can be

caught in moving parts.

• If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust collection

can reduce dust-related hazards.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it

was designed.

•

that cannot be controlled with the switch is dangerous and must be repaired.

• Disconnect the plug from the power source and/or the battery pack from the

power tool before making any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the risk of starting the

power tool accidentally.

• Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

• Maintain power tools. Check for misalignment or binding of moving parts,

operation. If damaged, have the power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

1280-002

OSCILLATING MULTI-TOOL KIT

could result in a hazardous situation.

• Hold power tool by insulated gripping surfaces when performing an operation

where the cutting tool may contact hidden wiring or its own cord. Contact with

a "live" wire will make exposed metal parts of the tool "live" and shock the

operator.

• Use clamps or another practical way to secure and support the workpiece to a

stable platform. Holding the work by hand or against your body leaves it unstable

and may lead to loss of control.

SERVICE

• Have your power tool serviced by a qualiﬁed repair person using only identical

replacement parts. This will ensure that the safety of the power tool is

maintained.

SPECIFIC SAFETY RULES FOR

OSCILLATING MULTI-TOOL KIT

WARNING: Know your oscillating tool. Do not plug the tool into the power

source until you have read and understand this Instruction Manual. Learn the tool’s

applications and limitations, as well as the speciﬁc potential hazards related to this

tool. Following this rule will reduce the risk of electric shock, ﬁre, or serious injury.

Always wear eye protection. Any power tool can throw foreign objects

into your eyes and cause permanent eye damage. ALWAYS wear

safety goggles (not glasses) that comply with ANSI safety standard

Z87.1. Everyday glasses have only impact resistant lenses.

They ARE NOT safety glasses.

WARNING: Glasses or goggles not in compliance with ANSI Z87.1

could cause serious injury when they break.

Always keep hands out of the path of the saw blade. Avoid awkward hand positions

where a sudden slip could cause your hand to move into the path of the saw blade.

Secure workpiece. Use clamps or a vice to hold the workpiece. It is safer than using

your hand and it frees both hands to operate the tool.

Make sure there are no nails or foreign objects in the part of the workpiece to

be cut or sanded.

To avoid injury from accidental starting, always remove the plug from the power

source before installing or removing an accessory.

Never use dull blades in the tool. They will cut slower, leave rough cuts and break

easily due to added pressure and excessive heat. They will also overload the motor

and cause premature failure of the tool.

Never use damaged or bent blades. They will be brittle and break easily possibly

causing injury to the operator.

Never touch a saw blade immediately after using the tool. The blade will be

extremely hot and will burn your hand.

Only use accessories designed for use with this tool.

SAVE THESE INSTRUCTIONS FOR REFERENCE

SYMBOLS

WARNING: Some of the following symbols may appear on the oscillating

tool. Study these symbols and learn their meaning. Proper interpretation of these

V Volts n

Three-phase alternating

current with neutral

A Amperes Read all documentation

Hz Hertz Direct current

W Watts noNo load speed

kW Kilowatts Alternating or direct current

Microfarads Class II Construction

L Litres Splash-proof construction

kg Kilograms Watertight construction

H Hours Protective grounding at

terminal, Class I tools

N/cm² Newtons per

square centimetre .../min Revolutions or

reciprocations per minute

Pa Newtons per

square centimetre Diameter

OPM Oscillation per minute 0

Min Minutes Directional Arrow

SSeconds Warning symbol

~or AC Alternating current

Three-phase

alternating current

This symbol designates that this tool is listed with U.S. requirements by

ETL Testing Laboratories, Inc.

UL62841-1，UL62841-2-4;

CSA C22.2#62841-1，CSA C22.2#62841-2-4

3042597

JD2480UH

1280-002

OSCILLATING MULTI-TOOL KIT

KNOW YOUR OSCILLATING 3A TOOL

LED Work light

Speed control

wheel

ON/OFF

switch

Tool less accessory

holder release lever

Air vents

ACCESSORIES

OSCILLATING TOOL COMPONENTS

KEY DESCRIPTION QTY

A 1

B 2” Rigid scraper blade 1

C Triangular sanding base 1

D Triangular sandpaper

60 grit

80 grit

120 grit

Open back

accessory holder

1-3/4" bi metal plunge blade

ASSEMBLY AND OPERATING

NOTE: The drawings in the assembly and operating section of this manual may

INSTALLING ACCESSORIES

All accessories are installed on this oscillating tool in a similar manner. For the

purposes of describing the accessory installation, the triangular sanding pad and

the metal cutting blade have been illustrated.

DANGER: Always remove the plug from the power source before installing

or removing accessories or sandpaper. Failing to remove the plug from the

power source may result in the tool accidentally being started and causing

serious injury to the operator.

1. Lift the tool less accessory holder release lever (4) up and toward the front of the

tool as far as it will go (5) (Fig. 1).

NOTE: This will open the tool less blade holder (6) to accept the accessory.

2. Insert the accessory mount (7) into the opened accessory holder.

3. Align the accessory mounting slots and holes with the accessory mounting teeth

(8) in the accessory mount.

NOTE: The slots and holes in the accessory must be engaged with the matching

teeth on the accessory holder to allow the accessory to be secured within the

accessory holder.

4 Move the tool-less accessory release lever back to its original position (4) to

clamp the accessory into the accessory holder.

NOTE: Check to make sure the accessory mounting pins are still aligned with the

slots and holes in the accessory mount.

Fig. 1

Inhaltsverzeichnis

Andere Benchmark Werkzeuge Handbücher

Benchmark

Benchmark 1280-000 Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

Grizzly

Grizzly H6472 Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung