BENDIXKing KA 310 Bedienungsanleitung

Honeywell International, Inc.

9201-B San Mateo Blvd N.E.

Albuquerque, New Mexico 87113

U.S.A.

Telephone: 855-250-7027 (Toll Free U.S.A./Canada)

Telephone: 602-365-7027 (International Direct)

KA 310 AUTOPILOT ADAPTER

STC INSTALLATION MANUAL

Document P/N 89000004-200 Rev 0

JULY 2019

Export Control

This document contains technical data and is subject to U.S. export regulations. These commodities,

technology, or software were exported from the United States in accordance with the export

administration regulations. Diversion contrary to U.S. law is prohibited.

ECCN: 7E994

PRODUCTION - Revision Superseded - 17 Jul 2019 18:30:00 UTC

REF:

RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS

UP793797

Blank Page

REF:

RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS

UP793797

89000004-200 KA 310 STC Installation Manual

Rev 0 Page T-1

Legal Notice

Proprietary Information

Honeywell - Confidential

THIS COPYRIGHTED WORK AND ALL INFORMATION ARE THE PROPERTY OF HONEYWELL INTERNATIONAL

INC., CONTAIN TRADE SECRETS AND MAY NOT, IN WHOLE OR IN PART, BE USED, DUPLICATED, OR

DISCLOSED FOR ANY PURPOSE WITHOUT PRIOR WRITTEN PERMISSION OF HONEYWELL INTERNATIONAL

Honeywell Materials License Agreement

The documents and information contained herein ("the Materials") are the proprietary data of

Honeywell International Inc. These Materials are provided for the exclusive use of Honeywell Service

Centers; Honeywell-authorized repair facilities; operators of Honeywell aerospace products subject to

an applicable product support agreement, their wholly owned-subsidiaries or a formally designated

third party service provider; and direct recipients of Materials from Honeywell’s Aerospace Technical

Publication Distribution.

The terms and conditions of this License Agreement govern your use of these Materials, except to the

extent that any terms and conditions of another applicable agreement with Honeywell regarding the

operation, maintenance, or repair of Honeywell aerospace products conflict with the terms and

conditions of this License Agreement, in which case the terms and conditions of the other agreement

will govern.

However, this License Agreement will govern in the event of a conflict between its terms and conditions

and those of a purchase order or acknowledgement.

1. License Grant - If you are a party to an applicable product support agreement, a Honeywell Service

Center agreement, or an authorized repair facility agreement, Honeywell hereby grants you a limited,

non-exclusive license to use these Materials to operate, maintain, or repair Honeywell aerospace

products only in accordance with that agreement.

If you are a direct recipient of these Materials from Honeywell’s Aerospace Technical Publication

Distribution and are not a party to an agreement related to the operation, maintenance or repair of

Honeywell aerospace products, Honeywell hereby grants you a limited, non-exclusive license to use

these Materials to maintain or repair the subject Honeywell aerospace products only at the facility to

which these Materials have been shipped ("the Licensed Facility"). Transfer of the Materials to another

facility owned by you is permitted only if the original Licensed Facility retains no copies of the Materials

and you provide prior written notice to Honeywell.

2. Rights In Materials - Honeywell retains all rights in these Materials and in any copies thereof that are

not expressly granted to you, including all rights in patents, copyrights, trademarks, and trade secrets.

No license to use any Honeywell trademarks or patents is granted under this License Agreement.

REF:

RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS

UP793797

89000004-200 KA 310 STC Installation Manual

Rev 0 Page T-2

3. Confidentiality - You acknowledge that these Materials contain information that is confidential and

proprietary to Honeywell. You agree to take all reasonable efforts to maintain the confidentiality of

these Materials.

4. Assignment and Transfer - This License Agreement may be assigned to a formally designated service

designee or transferred to a subsequent owner or operator of an aircraft containing the subject

Honeywell aerospace products. However, the recipient of any such assignment or transfer must assume

all your obligations under this License Agreement. No assignment or transfer shall relieve any party of

any obligation that such party then has hereunder.

5. Copies of Materials - Unless you have the express written permission of Honeywell, you may not

make or permit making of copies of the Materials. Notwithstanding the foregoing, you may make copies

of only portions of the Material for your internal use. You agree to return the Materials and any copies

thereof to Honeywell upon the request of Honeywell.

6. Term - This License Agreement is effective until terminated as set forth herein. This License

Agreement will terminate immediately, without notice from Honeywell, if you fail to comply with any

provision of this License Agreement or will terminate simultaneously with the termination or expiration

of your applicable product support agreement, authorized repair facility agreement, or your formal

designation as a third-party service provider. Upon termination of this License Agreement, you will

return these Materials to Honeywell without retaining any copies and will have one of your authorized

officers certify that all Materials have been returned with no copies retained.

7. Remedies - Honeywell reserves the right to pursue all available remedies and damages resulting

from a breach of this License Agreement.

8. Limitation of Liability - Honeywell does not make any representation regarding the use or sufficiency

of the Materials. THERE ARE NO OTHER WARRANTIES, WHETHER WRITTEN OR ORAL, EXPRESS, IMPLIED

OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, (i) WARRANTIES ARISING FROM COURSE OF

PERFORMANCE, DEALING, USAGE, OR TRADE, WHICH ARE HEREBY EXPRESSLY DISCLAIMED, OR (ii)

WARRANTIES AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF THIRD PARTIES, EVEN IF

HONEYWELL HAS BEEN ADVISED OF ANY SUCH INFRINGEMENT. IN NO EVENT WILL HONEYWELL BE

LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT

DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE

POSSIBILITY OF SUCH DAMAGES. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS

AND EXCLUSIONS WILL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF

CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OF LAW,

OR OTHERWISE.

9. Controlling Law - This License shall be governed and construed in accordance with the laws of the

State of New York without regard to the conflicts of laws provisions thereof. This license sets forth the

entire agreement between you and Honeywell and may only be modified by a writing duly executed by

the duly authorized representatives of the parties.

REF:

RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS

UP793797

89000004-200 KA 310 STC Installation Manual

Rev 0 Page T-3

Safety Advisory

WARNING: BEFORE THE MATERIALS CALLED OUT IN THIS PUBLICATION ARE USED, KNOW THE

HANDLING,

STORAGE AND DISPOSAL PRECAUTIONS RECOMMENDED BY THE MANUFACTURER OR

SUPPLIER. FAILURE

TO OBEY THE MANUFACTURERS’ OR SUPPLIERS’ RECOMMENDATIONS CAN

RESULT IN PERSONAL INJURY

OR DISEASE.

This publication describes physical and chemical processes which can make it necessary to use chemicals,

solvents, paints, and other commercially available materials. The user of this publication must get the

Material

Safety Data Sheets (OSHA Form 174 or equivalent) from the manufacturers or suppliers of the

materials to be

used. The user must know the manufacturer/ supplier data and obey the procedures,

recommendations,

warnings and cautions set forth for the safe use, handling, storage, and disposal of

the materials.

Warranty/Liability Advisory

WARNING: HONEYWELL ASSUMES NO RESPONSIBILITY FOR ANY HONEYWELL EQUIPMENT WHICH

IS NOT

MAINTAINED AND/OR REPAIRED IN ACCORDANCE WITH HONEYWELL’S PUBLISHED

INSTRUCTIONS

AND/OR HONEYWELL’S FAA/SFAR 36 REPAIR AUTHORIZATION. NEITHER DOES

HONEYWELLASSUME

RESPONSIBILITYFORSPECIALTOOLSANDTESTEQUIPMENTFABRICATEDBY

COMPANIES OTHER THAN

HONEYWELL.

WARNING: INCORRECTLY REPAIRED COMPONENTS CAN AFFECT AIRWORTHINESS OR DECREASE

THE LIFE

OF THE COMPONENTS. INCORRECTLY FABRICATED SPECIAL TOOLING OR TEST

EQUIPMENT CAN RESULT IN

DAMAGE TO THE PRODUCT COMPONENTS OR GIVE UNSATISFACTORY

RESULTS.

REF:

RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS

UP793797

89000004-200 KA 310 STC Installation Manual

Rev 0 Page T-4

Honeywell is a registered trademark of Honeywell International Inc.

All other marks are owned by their respective companies.

Our products are under continuous research and development. Any information may therefore be

changed

without prior notice. Honeywell reserves the right to make improvements or changes in the

product described

in this manual at any time without notice. While reasonable efforts have been made

in the preparation of this

document to assure its accuracy, Honeywell assumes no liability resulting from

any errors or omissions in this

document, or from the use of the information contained herein.

Honeywell Aerospace Online Technical Publications Website

Go to the Honeywell Online Technical Publications Website at www.myaerospace.com.

To download or view publications online

To tell BendixKing of a possible data error in a publication.

Changes to this manual are provided to users who have registered via the website to receive

updates.

BendixKing Customer Support

If you need to speak to personnel about Technical matters, the BendixKing Customer Support team

provides 24/7 customer service.

Telephone: 855-250-7027 (Toll Free U.S.A./Canada)

Telephone: 602-365-7027 (International)

Website: www.bendixking.com/support

Email: techsupport@bendixking.com

REF:

RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS

UP793797

89000004-200 KA 310 STC Installation Manual

Rev 0 Page T-5

RECORD OF REVISIONS

NOTE: The revision level for every page of this document will be updated during the revision process. A list of

effective pages is, therefore, not required.

Revision

Revision Date

Description

07/16/2019

Initial release

REF:

RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS

UP793797

89000004-200 KA 310 STC Installation Manual

Rev 0 Page TC-1

TABLE OF CONTENTS

1INTRODUCTION ........................................................................................................................1-1

1.1 How to Use This Manual..........................................................................................................1-1

1.1.1 General..............................................................................................................................1-1

1.1.2 Observance of Manual Instructions..................................................................................1-1

1.1.3 Symbols.............................................................................................................................1-1

1.1.4 Units of Measure ..............................................................................................................1-2

1.1.5 Electrostatic Discharge .....................................................................................................1-2

1.2 References ...............................................................................................................................1-2

1.2.1 Honeywell/Vendor Publications .......................................................................................1-2

1.2.2 Other Publications ............................................................................................................1-2

1.3 Acronyms and Abbreviations...................................................................................................1-3

1.4 Definition .................................................................................................................................1-5

2GENERAL INFORMATION...........................................................................................................2-6

2.1 Introduction .............................................................................................................................2-6

2.2 Scope........................................................................................................................................2-6

2.2.1 Part 23 Aircraft Not Identified on the STC ........................................................................2-6

2.3 KA 310 Overview......................................................................................................................2-6

2.4 Regulatory Compliance............................................................................................................2-7

2.5 KA 310 Installation Overview...................................................................................................2-7

2.6 Pre-Installation Checklist .........................................................................................................2-8

2.7 Technical Specifications...........................................................................................................2-8

2.8 Installation Limitations ............................................................................................................2-9

2.9 Environmental Qualification form (EQF) ...............................................................................2-10

2.10 STC Permission.......................................................................................................................2-11

2.11 Repair and Return..................................................................................................................2-11

3INSTALLATION OVERVIEW.........................................................................................................3-1

3.1 Introduction .............................................................................................................................3-1

3.2 Available Equipment................................................................................................................3-1

3.3 Installation Materials ...............................................................................................................3-1

3.3.1 Accessories Available from BendixKing ............................................................................3-1

3.3.2 Materials Required but Not Supplied ...............................................................................3-1

3.3.3 Tools Required but Not Supplied......................................................................................3-2

3.4 Unpacking and Inspection........................................................................................................3-2

3.5 Installation Considerations ......................................................................................................3-2

3.5.1 KA 310 Installation Considerations...................................................................................3-2

3.5.2 KA310 Installation Considerations with BendixKing Flight Control Systems....................3-3

3.5.2.1 Compatible BendixKing Flight Control Systems.............................................................3-3

3.5.2.2 KA 310 Installation Considerations in KAP 150/KAP 200/KFC 150/KFC 200 Flight Control

System 3-4

3.5.2.3 KA 310 Installation Considerations in KFC 225 Flight Control System...........................3-5

3.5.2.4 KA310 Installation Considerations in KAP 100 Flight Control System ...........................3-6

3.6 ARINC 429 Interface.................................................................................................................3-6

REF:

RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS

UP793797

89000004-200 KA 310 STC Installation Manual

Rev 0 Page TC-2

3.7 Placards and Labels..................................................................................................................3-7

3.8 Power Distribution...................................................................................................................3-7

3.8.1 Circuit Protection..............................................................................................................3-7

3.9 Cable and Wiring Considerations.............................................................................................3-8

3.9.1 Shield Termination............................................................................................................3-8

3.10 Electrical Bonding Considerations ...........................................................................................3-8

4INSTALLATION PROCEDURES .....................................................................................................4-1

4.1 KA 310 Location and Mounting ...............................................................................................4-1

4.1.1 KA 310 Installation with KAP 100/KAP 150/KAP 200/KFC 150/KFC 200/KFC 225 ............4-1

4.2 Weight and Balance .................................................................................................................4-1

4.3 Cable and Wiring......................................................................................................................4-2

4.4 Wiring, and Power Checks .......................................................................................................4-2

4.5 Aircraft Electrical Load Analysis (ELA)......................................................................................4-2

4.5.1 Aircraft with Existing ELA..................................................................................................4-2

4.5.2 Aircraft without Existing ELA ............................................................................................4-3

4.6 Aircraft Flight Manual Supplement (AFMS).............................................................................4-3

4.7 KA 310 LRU and Wiring Location Data.....................................................................................4-3

5CONNECTOR PINOUT INFORMATION.........................................................................................5-1

5.1 KA 310......................................................................................................................................5-1

6SYSTEM CONFIGURATION .........................................................................................................6-1

6.1 KI 300 Setup Mode Entry .........................................................................................................6-1

6.2 Autopilot Configuration ...........................................................................................................6-1

6.3 Application Software Part Number Confirmation ...................................................................6-2

7SYSTEM CHECKOUT...................................................................................................................7-3

7.1 Flight Control System Alignment .............................................................................................7-3

7.1.1 KAP 100/KAP 150/KFC 150/KAP 200/KFC 200/KFC225 Flight Control System Alignment7-3

7.1.2 KI 300/KA 310 AP Alignment Feature ...............................................................................7-3

7.2 Yaw Damper Checkout.............................................................................................................7-5

7.3 EMC Interaction Checkout.......................................................................................................7-7

7.4 Post Installation Flight Checks .................................................................................................7-7

7.4.1 KAP 100/KAP 150/KFC 150/KAP 200/KFC 200/KFC225 Flight Control System Flight Checks

7-7

8TROUBLESHOOTING..................................................................................................................8-1

8.1 Built-in-Test Function...............................................................................................................8-1

8.2 Power-Up Failures....................................................................................................................8-1

8.3 In-Flight Failures.......................................................................................................................8-1

8.4 KA 310 Analog Output to Autopilot Failure .............................................................................8-1

OUTLINE AND INSTALLATION DRAWINGS................................................................. A-1

INTERCONNECT DIAGRAMS...................................................................................... B-1

KA 310 INSTALLATION WORKSHEET.......................................................................... C-1

REF:

RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS

UP793797

89000004-200 KA 310 STC Installation Manual

Rev 0 Page TC-3

LIST OF FIGURES

Figure 1-1 Symbols....................................................................................................................................1-2

Figure 3-1 Installation of KA310 in KAP 150/KAP 200/KFC 150/KFC 200 Flight Control System .............3-4

Figure 3-2 Installation of KA310 in KFC 225 Flight Control System ..........................................................3-5

Figure 3-3 Installation of KA310 in KAP 100 Flight Control System...........................................................3-6

Figure 3-4 Termination Procedure.............................................................................................................3-8

Figure 6-1 Setup Mode Menu ....................................................................................................................6-1

Figure 6-2 Autopilot Type Setup Page .......................................................................................................6-2

Figure 6-3 Software Part Number Display Page.........................................................................................6-2

Figure 7-1 Autopilot Alignment Setup Page...............................................................................................7-3

Figure 7-2 AP Alignment Pitch Setup Page ................................................................................................7-4

Figure 7-3 AP Alignment Roll Setup Page ..................................................................................................7-4

Figure 7-4 AP Alignment Yaw Rate Setup Page .........................................................................................7-4

Figure 7-5 Rudder Deflection Orientation .................................................................................................7-6

Figure A - 1 KA 310 Base Unit.................................................................................................................... A-1

Figure A - 2 KA 310 Mounting Hole Location............................................................................................ A-1

Figure A - 3 KA 310 Center of Gravity ....................................................................................................... A-2

Figure B - 1 KA 310 Installation –KI 300 Interconnect...............................................................................B-1

Figure B - 2 KA 310 –Power and (optional) Radar Altimeter ....................................................................B-1

Figure B - 3 KA 310 Installation Notes........................................................................................................B-2

Figure B - 4 KA 310 Installation in KAP 100/KAP 150/KFC 150 Flight Control System...............................B-3

Figure B - 5 KA 310 Installation in KAP 100/KAP 150/KFC 150 Flight Control System...............................B-4

Figure B - 6 KA 310 Installation in KAP 200/KFC 200 Flight Control System..............................................B-5

Figure B - 7 KA 310 Installation in KAP 200/KFC 200 Flight Control System..............................................B-6

Figure B - 8 KA 310 Installation in KFC 225 Flight Control System............................................................B-7

Figure B - 9 KA 310 Installation in KFC 225 Flight Control System.............................................................B-8

Figure C - 1 KA 310 and Cable Routing (Top View) ....................................................................................C-2

Figure C - 2 KA 310 and Cable Routing (Side View)....................................................................................C-3

Figure C - 3 KA 310 Circuit Breaker Location .............................................................................................C-3

LIST OF TABLES

Table 1-1: Acronyms and Abbreviations....................................................................................................1-3

Table 2-1: KA 310 TSO Authorization.........................................................................................................2-7

Table 2-2: Pre-Installation Checklist ..........................................................................................................2-8

Table 2-3: KA 310 Specification..................................................................................................................2-8

Table 2-4: KA 310 Environmental Qualification Form (EQF)....................................................................2-10

Table 3-1: KA 310 Part Numbers................................................................................................................3-1

Table 3-2: KA 310 Installation Kit 89000004-104.......................................................................................3-1

Table 3-3: Materials Required but Not Supplied .......................................................................................3-1

Table 3-4: Tools Required but Not Supplied..............................................................................................3-2

Table 3-5 List of Compatible Flight Control Systems .................................................................................3-3

Table 4-1: KA 310 LRU Weight ...................................................................................................................4-2

Table 5-1. KA 310 DB-44 Pin Descriptions .................................................................................................5-1

REF:

RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS

UP793797

Inhaltsverzeichnis

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung