
NAVIGATION DISPLAY
6
NAVIGATION DISPLAY
2D, 3D and Road Safety
There are three types of navigation views in Twig
Navigation, a 2D, a 3D and Road Safety display.
To change between these views simply use the
left and right arrow keys n. This will scroll you
through the different display types.
The 2D and the 3D views are map displays, show-
ing you information as a 2- or 3- dimensional
map. The displayed information depends on
whether the Twig Navigation is currently routing
to a destination or not. See
map interfaces on
page 7
.
It’s possible to zoom in and out of the 2D and 3D
maps to see more or less details. Use the up and
down arrow keys n for zooming. The current
zoom level can be seen at the bottom left of the
view. The available levels are 20km, 10km, 3km,
800m, 400m, 100m, 50m, 20m, 10m and 5m.
You can choose between the 2D or the 3D view as
your default display in
Settings
. See
settings on
page 21
.
The third view is the Road Safety display. This
shows a large icon displaying your next direction,
a textural instruction and a distance to the next
turn. As you make the correct turns in your
route, the Road Safety view changes to show you
your next instruction. This view can only be seen
when you have a route planned.
You can use the function keys while in any of the
views. Pressing the left function key .
Route To
will show you routing options. From here you can
quickly input or select a destination where you
would like to be routed to. See
route to on page 13
.
Press the middle key "to access Twig Navigation
menu. From here you can create routing plans,
access your favourite destinations, change set-
tings, etc. See
twig navigation on page 11
.
You can also access your predefined quick routing
keys. To use a quick route hold down the appro-
priate alphanumeric key (0to 7and 9).
Press .
Exit
to exit Twig Navigation.