BenQ LU960UST Bedienungsanleitung
Installation Guide
Digital Projector
Installation Projector
㕟ἴ㉼⽘㩆⭰壄㋮⌾
ރڧߑ؍ܶԧ
Guide d’installation du projecteur numérique
Digitalprojektor Installationsanleitung
Guida all'installazione del proiettore digitale
Руководство по установке цифрового проектора
♈㫴䉬G䘸⦐㥑䉤G㉘㾌G㙼⇨㉐
儫儜儣兏儻兑儜儋儓儣儈兗儝儬兠兏儐儈儭
| LU960UST
English
1
Table of Contents
Notice..................................................................................................... 2
Notice on laser ............................................................................................................... 2
Cooling notice ................................................................................................................ 3
Product information ............................................................................. 5
Packing content.............................................................................................................. 5
Specication ................................................................................................................... 5
Terminals ........................................................................................................................ 6
Remote control .............................................................................................................. 7
Installation ............................................................................................. 9
Projection table.............................................................................................................. 9
LED indicator ........................................................................................ 11
Projector dimension ............................................................................. 14
RS232 command control...................................................................... 15
RS232 pin assignment.................................................................................................... 15
RS232 serial port with a crossover cable..................................................................... 15
PJLink .............................................................................................................................. 23
Please visit below website for latest version of User Manual / Installation Guide.
http://business-display.benq.com/
V1.00
English
2
Notice
Notice on laser
This symbol indicates that there is a potential hazard of eye exposure to
laser radiation unless the instructions are closely followed.
yLaser class
(for USA) This Laser Product is designated as Class 3R during all procedures of
operation and complies with IEC/EN 60825-1:2007.
(for WW) This Laser Product is designated as Class 1 during all procedures of
operation and complies with IEC/EN 60825-1:2014.
LASER LIGHT - AVOID DIRECT EYE EXPOSURE.
Do not point laser or allow laser light to be directed or reected toward other
people or reective objects.
Direct or scattered light can be hazardous to eyes and skin.
There is a potential hazard of eye exposure to laser radiation if the included
instructions are not followed.
Caution – use of controls or adjustments or performance of procedures other than
those specied herein may result in hazardous radiation exposure.
yLaser parameters
Wavelength 450nm - 460nm (Blue)
Mode of operation Pulsed, due to frame rate
Pulse width 1.34ms
Pulse repetition rate 120Hz
Maximum laser energy 0.698mJ
Total internal power >100w
Apparent source size >10mm, at lens stop
Divergence >100 mili Radian
yLaser light instruction
Laser aperture
English
3
Cooling notice
Allow at least 50 cm (19.7 inch) for clearance around the exhaust vent. Make sure no objects block
air inlet within 50 cm (19.7 inch).
Keep the outlet at least 1 m away from the inlets of other projectors.
Air inletAir outlet
• The projector can be installed at any angle.
English
4
• Allow at least 50 cm of clearance around the exhaust vent.
• Ensure that the air intake vents do not recycle hot air from the exhaust vent.
• When operating in an enclosed space, make sure that the surrounding air temperature does
not exceed the projector's operating temperature and that the air intake and exhaust vents are
unobstructed.
All enclosures should pass a certied thermal evaluation to ensure that the projector does not
recycle exhaust air. Recycling exhaust air may cause the projector to shutdown even if the ambient
temperature is within the acceptable operating temperature range.
Minimum 50 cm
(19.69 inch)
Minimum 50 cm
(19.69 inch)
Minimum 50 cm
(19.69 inch)
Minimum 50 cm
(19.69 inch)
English
5
Product information
Packing content
Remote Control
Power Cord(s) Regulatory Statement
Specication
LU960UST
Projection system 1-CHIP DMD
Native resolution 1920*1200 pixels, 16:10
Light source Laser diodes
Power consumption 500Watts (Normal mode)/ 380Watts (Eco mode)
Dimension 480 x 157.4 x 473 mm
Weight 12 kg
Note:
• The brightness output will vary depending on each units and actual usage.
• Please nd the latest user’s manual on the local website.
English
6
Terminals
MINI-B
Support Mini USB type B for service only.
LAN
For connection to RJ45 Cat5/Cat6 Ethernet cable to
control the projector through a network.
HDBaseT
For connection to a HDBaseT transmitter via an
Ethernet cable (Cat5/Cat6) to input up to 4K 30Hz,
RS232 control signal and IR
control signal. The HDBaseT port does not support
LAN control.
HDMI 2
Connection to HDMI source.
HDMI 1
Connection to HDMI source.
DISPLAYPORT
Connection to a Display Port source.
HDMI OUT
Connection to HDMI device.
PC IN
15-pin VGA port for connection to RGB, component
HD source, or PC.
MONITER OUT
Connection to other display equipment for concurrent
playback display.
AUDIO OUT
Connection to a speaker amplier or headset.
AUDIO IN
Connection to an audio input source via an audio cable.
REAR LIGHT
Illumination for terminals.
USB 1.5A
Support 5V/1.5A output.
3D SYNC IN
Connect 3D-sync in cable from a computer or an
enabled device.
3D SYNC OUT
Connection to 3D IR sync signal transmitter.
RS-232 IN
Standard 9-pin D-sub interface for connection to PC
control system and projector maintenance.
12V TRIGGER
3.5mm mini earphone jack, employs 200mA display
relay to provide 12(+/-1.5)V output and short circuit
protection.
WIRED REMOTE
Connection to wire remote controller.
Caution:
Make sure the port is valid before inserting a wired remote controller. The remote controller may be damaged in
case of an invalid port, e.g. a wired remote controller is connected to trigger output. For more information about
upgrading rmware via Lan, please contact BenQ service.
English
7
Remote control
ON / OFF
Toggles the projector between standby mode and on.
KEYSTONE+/KEYSTONE-
Manually corrects distorted images resulting from an angled projection.
VOLUME +/VOLUME -
Increases/decreases the projector volume.
QUICK INSTALL
Displays the Quick Install OSD menu.
MUTE
Toggles projector audio between on and off.
Arrow keys (▲Up, ▼Down, ◄Left, ►Right)
When the On-Screen Display (OSD) menu is activated, the arrow keys
are used as directional arrows to select the desired menu items and to
make adjustments.
ENTER
Selects an available picture setup mode. Activates the selected On-
Screen Display (OSD) menu item.
MENU
Turns on the On-Screen Display (OSD) menu. Goes back to previous
OSD menu, exits and saves menu settings.
EXIT
Goes back to previous OSD menu, exits and saves menu settings.
INPUT
Selects an input source for display.
PCITURE
Press to display Picture menu.
NETWORK
Selects Network Display as the input signal source.
AUTO SYNC
Automatically determines the best picture timings for the displayed im-
age.
ASPECT
Selects the display aspect ratio.
BLANK
Used to hide the screen picture.
English
8
OVERSCAN
Press to select overscan mode.
FREEZE
Freezes the projected image.
LAMP MODE
Press to display OSD menu to select desired light mode.
3D MODE
Press to display 3D setup menu.
INFO.
Press to display INFORMATION menu.
LIGHT
Press to open backlight of remote controller.
CLEAR
Clear remote ID SET assigned to all projectors.
Press CLEAR and ID SET for ve seconds. The LED blinks three times
then the ID setting is cleared.
SHUTTER
The function is not available on this projector.
ID SET
• Remote control ID SET (set the particular remote code)
Press to set remote ID.
Press ID SET for three seconds. The POWER indicator on the remote
control blinks, then press 01~99 to designate an ID.
Note:
The remote control number (Remote control ID) must match the Pro-
jector ID Setting number for accurate control.
• Clear Remote ID SET (set remote code to all)
Press CLEAR and ID SET for ve seconds. The POWER
indicator on the remote control blinks a single instance to reset
remote code to all, can control projector no matter projector id
setting.
Numeric buttons
Enters numbers in network settings.
Numeric buttons 1, 2, 3, 4 cannot be pressed when asked to enter pass-
word.
WIRE REMOTE jack
Connect to projector for wire remote control.
English
9
Installation
Projection table
• LU960UST
The screen aspect ratio is 16:10 and the projected picture is 16:10.
Note:
To optimize the projection quality, we suggest to project images in an area without grayscale.
Diagonal Image Width Image Height
Offset Fix Distance (mm) Distance (mm)
Projector Top to
Screen Bottom (A)
Center of Cover
Glass to Screen (B)
Projector Front to
Screen (C)
(Inch) (mm) (Inch) (mm) (Inch) (mm) (Inch) (mm) (Inch) (mm) (Inch) (mm)
70 1778 59.4 1508 37.1 943 5.4 136 12.9 328 15.8 402
80 2032 67.8 1723 42.4 1077 6.4 163 15.0 382 17.9 456
87 2210 73.8 1874 46.1 1171 7.2 182 16.5 420 19.4 494
90 2286 76.3 1939 47.7 1212 7. 5 190 17.2 436 20.1 510
100 2540 84.8 2154 53.0 1346 8.6 217 19.3 491 22.2 565
120 3048 101.8 2585 63.6 1616 10.7 271 23.6 599 26.5 673
150 3810 127.2 3231 79.5 2019 13.9 352 30.0 762 32.9 836
(A)
Screen
(B)
(C)
Screen
Front
Side
Andere Handbücher für LU960UST
1
Inhaltsverzeichnis
Andere BenQ Projektor Handbücher
BenQ
BenQ MW814ST Bedienungsanleitung
BenQ
BenQ PX9510 Bedienungsanleitung
BenQ
BenQ TK951ST+ Bedienungsanleitung
BenQ
BenQ HT5550 Bedienungsanleitung
BenQ
BenQ i500 Bedienungsanleitung
BenQ
BenQ MW870UST Bedienungsanleitung
BenQ
BenQ MX726 Bedienungsanleitung
BenQ
BenQ MX805ST Bedienungsanleitung
BenQ
BenQ LX710 Bedienungsanleitung
BenQ
BenQ PB8120 - SVGA DLP Projector Bedienungsanleitung
BenQ
BenQ Installation Series PB8250 Bedienungsanleitung
BenQ
BenQ PB6210/ PB6110 Bedienungsanleitung
BenQ
BenQ W1800 Bedienungsanleitung
BenQ
BenQ TH585P Bedienungsanleitung
BenQ
BenQ MX720 Bedienungsanleitung
BenQ
BenQ MW712 Bedienungsanleitung
BenQ
BenQ Joybee GP1 Bedienungsanleitung
BenQ
BenQ CH100 Bedienungsanleitung
BenQ
BenQ MH5005 Bedienungsanleitung
BenQ
BenQ PB2120 - SVGA DLP Projector Bedienungsanleitung
Beliebte Projektor Handbücher anderer Marken
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung
NEC
NEC NP600S EDU Bedienungsanleitung
Eiki
Eiki EK-623U series Bedienungsanleitung
Epson
Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung
Epson
Epson PowerLite Home Cinema 705HD Bedienungsanleitung
Christie
Christie LHD700 Bedienungsanleitung
