Beok Controls TOL47 Series Bedienungsanleitung

EP: Electric heating WPB: Gas boiler heating

Product packaging

Thermostat host 1 PC

Certificate of conformity 2PCS

Sensing line (optional) 1PC

Product parameters

WP : Water heating 3A;

EP : Electric heating 16A

WPB : Linkage; M:Gas boiler 3A

Electrical Specifications:

1.Temperature Sensor: NTC 2.Temperature accuracy: ±1℃

3. Display screen: LCD 4. Working environment: -5-50℃

5.Self-consumption power: <1W 6.Temperature setting: 5 ~60℃

7. Display range: 0-51℃ 8. Load current: water heater 3A

electric heater 16A

gas boiler heater 3A

9. Voltage: AC95- 220V, 50/60Hz

Icon description

WP: Water heating

Wiring Diagram

Mounting steps

1. Connect the power box

according to the wiring diagram

2. Separate the power supply

from the control board cable

3. Screw the power supply

into the box of 86

4. Connect the power board to the

control board line, and align the

buckle at 30 degrees to complete

the installation.

Welcome

Application

Thank you for your trust and support!

We have adopted advanced technology and perfect craftsmanship so that your new

thermostat will provide you with a sutable temperature environment every day in the

future. It makes your life more pleasant and artistic and making your living environment

more fashionable aesthetic.

For detailed instructions on installing and using this thermostat, please read this manual

carefully.

Please get in touch with a professional to install the thermostat for you. Besides, please

install and use this product within the scope of the law.

The intelligent digital humidity controller is a floor heating system suitable for room

temperature control and household temperature control. It controls the operating status

of the floor heating equipment by sensing the comparison between the ambient

temperature and the set temperature. While improving comfort, it achieves the purpose

of energy saving.

The digital thermostat adopts microcomputer control technology and has an elegant

design, and is easy to use. Moreover, it has manual and automatic functions,

programmable functions, and state memory functions.

This thermostat is used for water heating,

electric heating, or gas boiler.

When POWER OFF, press the M key and the key for 5 seconds to enter the

advanced setting.

Press the M key to enter the next option, then press the up and down key to adjust,

press the key to exit the advanced option setting mode.

Temperature

compensation

The default value of the calibration room temperature is -2℃ . Press

the up or down key to adjust the range from 9.9℃ to -9.9℃.

Sensor selection

Limit temperature

value modification

The temperature sensor selection defaults to IN. Press the up key or the down key

to adjust it respectively as IN internal sensor selection. ALL means all internal

sensors are selected; OUT means external sensors are set.

The limit temperature value is 35℃ by default. Press the up or down key to adjust

the range from 5℃ to 60℃.

The default setting temperature difference start is 1℃; press the up or down key to

adjust the range from 1℃ to 10℃.

Temperature difference

setting

Advanced Option Setting

Antifreeze function Set the antifreeze function as OFF by default; press the up key to turn on the

antifreeze function.

Rest day selection The default setting of rest days is double rest; press the up or down to adjust.

Main and auxili reverse

selection (optional)

Set the main and auxiliary reverse to 0 by default. Press the up or down key to

adjust 0 to turn off the main and additional reverse function, and 02 to indicate the

auxiliary reverse.

Passive linkage output

delay time (optional)

Set the passive linkage delay time as 0 by default. Press the up or down key to

adjust the range of 0-5 minutes.

Set temperature

upper limit Set the upper limit of the temperature to 60 ℃; press the up or down key to adjust

the range from 35℃ to 95℃.

Reset Set to restore factory settings. The default display is "-," press the up key to

display "---" and then press the enter key to restore the factory settings.

Operation Guide

1. Power on/off: press the key to turn on/off the thermostat.

2. Press the M key to switch between manual and automatic modes.

3. In the automatic mode, press the key or key to adjust the temperature, and it

will enter the automatic mode, which only runs for a while.

4. Press the key to enter the clock setting, press the mode key M to switch the

setting options, and press the up and down keys to adjust each parameter value.

Note: The time of the WIFI model will automatically obtain the Internet time.

5. Simultaneously press and hold the up and down keys for 5 seconds to add or

cancel the childlock.

6. WIFI link: When the thermostat is turned on, press and hold the up button for five

to eight seconds, the WIFI icon flashes on the thermostat display, and the thermostat

enters the code matching state.

Time programming instructions

Long press the M key to enter the programming setting, short press the M key to

switch options, press the up or down key to adjust the parameters of each option,

and press the 6 key to exit and save mode.

Andere Beok Controls Thermostat Handbücher

Beok Controls

Beok Controls TOL43-AC Series Bedienungsanleitung

Beok Controls

Beok Controls TGR-86 Bedienungsanleitung

Beok Controls

Beok Controls BOT Series Bedienungsanleitung

Beok Controls

Beok Controls TOL63R Bedienungsanleitung

Beok Controls

Beok Controls TGT70 Technisches Handbuch

Beok Controls

Beok Controls TGP51GWIFI-EP Bedienungsanleitung

Beok Controls

Beok Controls TGT70WIFI-AC2 Bedienungsanleitung

Beok Controls

Beok Controls TDS23-AC2 Bedienungsanleitung

Beok Controls

Beok Controls TDS21-AC Bedienungsanleitung

Beok Controls

Beok Controls TGW60 Series Bedienungsanleitung

Beok Controls

Beok Controls TGW60 Bedienungsanleitung

Beok Controls

Beok Controls TGP51WIFI Bedienungsanleitung

Beok Controls

Beok Controls TDS21WIFI-AC2 Bedienungsanleitung

Beok Controls

Beok Controls TDS21 Bedienungsanleitung

Beok Controls

Beok Controls BOT-205 Bedienungsanleitung

Beok Controls

Beok Controls TDS75 Bedienungsanleitung

Beok Controls

Beok Controls BOT-313 Bedienungsanleitung

Beok Controls

Beok Controls TOL62A Series Bedienungsanleitung

Beok Controls

Beok Controls TDS23M Bedienungsanleitung

Beok Controls

Beok Controls TDR-83 Bedienungsanleitung

Beok Controls

Beok Controls TDR-83 Bedienungsanleitung

Beok Controls

Beok Controls TOL313WIFI Series Bedienungsanleitung

Beok Controls

Beok Controls TDR89 Bedienungsanleitung

Beok Controls

Beok Controls TGR-86 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung