page 10
3.3. Thickness of slices
The thickness of slices is infinitely variable from 0 to 10 mm. In
order to adjust the thickness of the slices you have to turn the
thickness knob. Turning to the left thickness plate opens. Turning to
the right: thickness plate closes. The scale on the thickness knob
serves as adjusting aid.
In case the machine does not
start and the tickness value on
the display flashes after having
pushed the"Start/Stop" key The
thickness knob should be roated to a value =>0,4. Then
start again.
3.4. Operation of the end piece holder
Grip the end piece holder lever and pull it towards the front of the
machine to disengage the drive. Then holding lever in this position,
pull the lever in direction of the knife, or away from it to move the
end piece holder. In order to engage the drive release the lever and
move the end piece holder slightly backwards and forwards
If the end piece holder is placed on top of the food product and the slicing process moves towards the
knife, the machine will automatically stop approximately 40mm from the knife. This is prevent the end
piece holder from hitting the sharpener cover. At this time, move the end piece holder to behind the food
product and restart the machine, the machine will now slice right up to the knife, (with minimum waste)
3.5. Automatic or manual movement of the carriage
The machine is equipped with an automatic carriage movement which can be disengaged. The carriage can then
be moved by hand.
automatic movement = lever in vertical position
movement by hand = lever in horizontal position
Adjusting automatic movement
Switch off the machine.
Turn lever counter clockwise to the vertical position.
Move the carriage forward and backward by hand until it is engaged.
Carriage can no longer be moved by hand now.
Adjusting movement by hand
Switch off the machine.
Turn the lever to the horizontal position.
Carriage can now be moved by hand.
Always switch off the machine for adjusting the carriage movement!
NEVER ENGAGE OR DISANGAGE THE CARRIAGE WHEN THE MACHINE IS RUNNING
