BESAFE IZI COMFORT ISOFIX Bedienungsanleitung

ECE R44/04

www.besafe.eu

Usermanual

Tested and Approved

ECE R44/04

Complies with revised

standard:

0+/1

ECER44/04

SEMI-UNIVERSALO-18KG

UNIVERSAL9-18KG

R 44 04201(SEMI-UNIVERSAL)

R 44 04202(UNIVERSAL)

Vital information 3

Preparing to install 4

REARWARD FACING Before installation 6

REARWARD FACING Installation 8

REARWARD FACING Warning: potential misuse 11

REARWARD FACING Removing 12

FORWARD FACING Installation 14

Sitting positions 18

Car seat protection 18

After an accident 19

Guarantee 19

Removing and reﬁtting the cover 20

Important advice 22

Point of sale information 23

Thank you for choosing Besafe iZi Combi ISOﬁx.

Contents

It is important that you read this user manual BEFORE

installing your iZi Combi ISOﬁx. Incorrect installation could

endanger your child.

BeSafe advises that child seats should not be bought or

sold second-hand.

Second-hand car seats

Vital information

!iZi Combi ISOfix can be installed rearward-facing. In this-

position the car must be equipped with ISOfix anchorage

points. When iZi Combi ISOfix is installed forward facing, the

3-point-belt has to be used.

BeSafe iZi Combi ISOfix is approved in groups 0+ and 1,-

rearward-facing from 0-18 kg and group 1 forward-facing,

from 9-18 kg.

We recommend to use the seat as long as possible in the-

rearward facing installation.

iZi Combi ISOfix is not allowed to mount in front passenger-

seat with an activated airbag.

For children under 1 year and/or under 10 kg weight, we-

recommend that the most reclined sitting position is used.

We recommend that this seat is used only for children who-

can sit upright, so not younger than 6 months.

The floor support must always be used when it is installed-

rearward-facing in cars with ISOfix . When installing forward

facing the floor support and the front brace shall not be

used.

When installed with a 3-point-belt: Only suitable if the-

approved vehicles are fitted with 3-point-belts, approved to

UN/ECE Regulation No. 16 or other equivalent standards.

The harness must always be used when the child is in the-

seat.

Under the fabric cover we use EPS foam. Do not push or pull-

too hard against the foam, since you might damage the foam.

1. Internal harness

2. Harness adjustment

3. Front brace

4. Switch for ISOﬁx connectors

5. Lever for sleeping positions

6. Ratchet for front brace

7. ISOﬁx connectors

Crucial parts

Preparing to install

8. Release button for ISOﬁx connectors

7. ISOﬁx installation connectors

9. Plastic caps for the ISOﬁx connectors

10. Indicator for correct installation

11. Belt height adjuster

12. Floor support

13. Lockingbolt for ﬂoor support

14. Belt loop for the ﬂoor support

15. ISOﬁx anchorage (car)

7. ISOﬁx connector

16. ISOﬁx insertion clips

Too high Too low Correct

Click!

Heightadjustmentofharness system

Height can be adjusted by releasing

the height adjustment device on the back of

the iZi Combi ISOﬁx, place it in the correct

position and clicking it in. Twist and pull the

shoulder belts on the front side of the seat

until the belts are adjusted into the correct

position. Check the webbing has not become

twisted.

Position of the shoulder strap:

Check that the shoulder strap

slots are levelled with your child’s

shoulders.

You must adjust the shoulder belt of the harness to the

correct position for your child before installing the seat, as it

cannot be adjusted in the car. The harness must be fastened

and adjusted correctly at all times. Children should be

encouraged to remain within the harness system.

Lay the shoulder straps over the sides of the

iZi Combi ISOﬁx, before your child is seated.

Then place the straps over the shoulders of

your child and close the buckle; Click!

Position the pads on the shoulder straps over

the child’s shoulders. Place one hand on the

front of the car seat and pull the harness

adjustment strap towards you. Continue pulling

until the harness is a comfortable but ﬁrm ﬁt.

Tighten the belts by pulling them towards

you and in this way straighten them out

inside the construction.

Pull out the shoulder belts while pressing the

button on the harness adjustment mechanism.

REARWARD FACING - Before installation

When mounting in the back

seat, push the front seat as

far forward as possible.

When mounting in the front

seat, adjust the backrest in

a upright position.

Find the ISOﬁx

anchorage points in the

car (15).

If your car is not epuipped

with ISOﬁx insertion clips (16),

insert these to make installation

easier.

You can ﬁnd the ISOﬁx insertion

(16) clips under the base of your

iZi Combi ISOﬁx.

Clip the insertion clips into the

anchorage points.

!DO NOT use on a passenger seat ﬁtted with activated

frontal airbags. AIRBAG

Remove the plastic

caps (9) from the ISOﬁx

connectors (7) by pressing

down the ISOﬁx release

button (8).

Use the ratchet (6) to adjust

the front brace to the inmost

position. The ratchet (6)

is used to adjust the front

brace in both directions.

Switch the knobs on the

ratchet to change direction.

The ﬂoor support (12)

must go through the belt

loop (14). The belt loop

must also be led into the

hook on the ﬂoor support.

Do not fasten the locking

bolt (13) yet.

Assemble the ﬂoor support

before you install the iZi

Combi ISOﬁx in your car.

Important: The belt loop

must be led into this hook

REARWARD FACING - installation in the car

!The BeSafe iZi Combi ISOﬁx can ONLY be installed rearward

facing in cars with ISOﬁx anchorage points.

!The BeSafe iZi Combi ISOﬁx must not be used in the

front passenger seat without deactivating the airbag.

1Place the seat into the car by

racing the seat with the front

brace ﬁrst.

BeSafe iZi Combi ISOﬁx is installed the same way in the

front and back seat.

Push the ﬂoor support down

to the ﬂoor. The ﬂoor support

(12) must go through the belt

loop (14) and the belt loop

must be led into the hook

on the ﬂoor support. See

explanation in the chapter

“BEFORE INSTALLATION”.

Turn the seat into the right

position (with the front brace

against the backrest).

Click the ISOﬁx connectors in

the ISOﬁx anchorages.

Pull both ISOﬁx connectors (7)

as far out as possible.

The switch (4) then goes into

the lowest position and locks

the connectors (7).

Make sure that the two indica-

tors (10) are green, both in the

hole and on the inside of the

release gear.

Adjust the ﬂoor support (12)

so that it is in contact with the

ﬂoor of the vehicle.

Lock the ﬂoor support with the

lockingbolt (13).

13 12

Click

Adjust the front brace

outwards with the ratchet

(6). Continue tightening until

the brace is pressed well into

the backrest of the car seat.

Make sure all ISOﬁx indicators are green before you drive.

Make sure the ﬂoor support is fully pushed down

and locked when mounting rearward facing.

DO NOT use on a passenger seat ﬁtted with

activated frontal airbags.

If possible, push the front seat backwards so that it is in

contact with the child seat. If it is not possible to obtain

contact with the child seat, push the backrest of the front

seat forward so that the distance between child seat and

backrest is minimum 25 cm.

Correct installation

AIRBAG

Andere Handbücher für IZI COMFORT ISOFIX

Inhaltsverzeichnis

Andere BESAFE Autositz Handbücher

BESAFE

BESAFE iZi Modular i-Size Bedienungsanleitung

BESAFE

BESAFE IZI UP Bedienungsanleitung

BESAFE

BESAFE IZI COMFORT ISOFIX Bedienungsanleitung

BESAFE

BESAFE iZi Kid i-Size Bedienungsanleitung

BESAFE

BESAFE iZi Flex FIX i-Size Bedienungsanleitung

BESAFE

BESAFE iZi Up X1 Handicap Bedienungsanleitung

BESAFE

BESAFE iZi Kid Bedienungsanleitung

BESAFE

BESAFE IZI COMFORT ISOFIX - CAR LIST 10-2009 Bedienungsanleitung

BESAFE

BESAFE iZi Go Modular i-Size Bedienungsanleitung

BESAFE

BESAFE IZI UP Bedienungsanleitung

BESAFE

BESAFE Handicap Bedienungsanleitung

BESAFE

BESAFE iZi Combi X1 Isofix Bedienungsanleitung

BESAFE

BESAFE IZI COMFORT ISOFIX Bedienungsanleitung

BESAFE

BESAFE iZi Up X1 Handicap Bedienungsanleitung

BESAFE

BESAFE iZi Turn B i-Size Bedienungsanleitung

BESAFE

BESAFE iZi Twist i-Size Bedienungsanleitung

BESAFE

BESAFE iZi Turn B i-Size Bedienungsanleitung

BESAFE

BESAFE Stretch Bedienungsanleitung

BESAFE

BESAFE iZi Comfort Bedienungsanleitung

BESAFE

BESAFE iZi flex flx i-Size Bedienungsanleitung

BESAFE

BESAFE iZi Go Isofix Bedienungsanleitung

BESAFE

BESAFE iZi Combi x2 Bedienungsanleitung

BESAFE

BESAFE IZI UP X2 STABILITY STRAP - V1.0 Bedienungsanleitung

BESAFE

BESAFE iZi Combi Bedienungsanleitung

Beliebte Autositz Handbücher anderer Marken

Britax

Britax PARKWAY SGL Bedienungsanleitung

JANE

JANE nurse cruiser Bedienungsanleitung

Digicom

Digicom Tippy Pad Bedienungsanleitung

Giordani

Giordani orion 012 Bedienungsanleitung

BRIO

BRIO ZENTO Bedienungsanleitung

Combi

Combi Zeus Turn 8815 Series Bedienungsanleitung

Graco

Graco Car Booster Seat Bedienungsanleitung

Coccolle

Coccolle Atira Bedienungsanleitung

hifold

hifold HF01-GL Bedienungsanleitung

CYBEX

CYBEX SOLUTION X2-FIX Bedienungsanleitung

kiwy

kiwy SLF 123 Bedienungsanleitung

Safety 1st

Safety 1st Summit ISO 30 Bedienungsanleitung

Safety 1st

Safety 1st Grand 2-IN-1 Bedienungsanleitung

Graco

Graco NAUTILUS Bedienungsanleitung

Britax

Britax Multi-Tech BB0-702-00 Bedienungsanleitung

Grammer

Grammer MSG45/421 Betriebsanleitung

Nuna

Nuna REBL PLUS Bedienungsanleitung

Graco

Graco Child Restraint Bedienungsanleitung