BEST ACCESS SYSTEMS V Series Bedienungsanleitung
SERVICE MANUAL
SERVICE MANUAL
CREDITS/COPYRIGHT
©1996–99, 2001 Best Lock Corporation. All rights reserved. Printed in the United
States of America.
Information in this document is subject to change without notice and does not
represent a commitment on the part of Best Lock Corporation. The software described
in this document are furnished under a license agreement or nondisclosure agreement.
This publication is intended to be an accurate description and set of instructions
pertaining to its subject matter. However, as with any publication of this complexity,
errors or omissions are possible. Please call your Best Lock distributor or Best Lock
Corporation at (317) 849-2250 if you see any errors or have any questions. No part of
this manual and/or databases may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying, recording, or information
storage and retrieval systems, for any purpose, without the express written permission
of Best Lock Corporation.
This document is distributed as is, without warranty of any kind, either express or
implied, respecting the contents of this book, including but not limited to implied
warranties for the publication’s quality, performance, merchantability, or fitness for any
particular purpose. Neither Best Lock Corporation, nor its dealers or distributors shall
be liable to the user or any other person or entity with respect to any liability, loss, or
damage caused or alleged to be caused directly or indirectly by this publication.
Written and designed at Best Lock Corporation, 6161 East 75th Street, Indianapolis,
Indiana 46250
T61932 Rev C 17778112 April 2001
V Series Service Manual i
CONTENTS
FIGURES V
GETTING STARTED 1–7
Introduction 1–7
Certifications and standards 1–7
HV and KV Locks 1–7
V Series Controller 1–8
Documentation package 1–8
Technical support 1–9
Support services 1–9
Telephone technical support 1–9
Training seminars 1–10
SECURITY DEVICE MAINTENANCE 2–1
8KV/9KV magnetic stripe trim exploded diagram 2–2
8KV/9KV magnetic stripe trim parts list 2–3
8KV/9KV keypad trim exploded diagram 2–4
8KV/9KV keypad trim parts list 2–5
8KV/9KV proximity trim exploded diagram 2–6
8KV/9KV proximity trim parts list 2–7
8KV/9KV exploded chassis diagram 2–8
8KV/9KV chassis parts list 2–9
34/35HV magnetic stripe trim exploded diagram 2–10
34/35HV magnetic stripe trim parts list 2–11
34/35HV keypad trim exploded diagram 2–13
34/35HV keypad trim parts list 2–14
Contents
ii V Series Service Manual
34/35HV proximity trim exploded diagram 2–16
34/35HV proximity trim parts list 2–17
34/35HV case with deadbolt exploded diagram 2–19
34/35HV case with deadbolt parts list 2–20
34/35HV case without deadbolt exploded diagram 2–21
34/35HV case without deadbolt parts list 2–22
XV Controller exploded diagram 2–23
XV Controller parts list 2–23
External communications exploded diagram 2–24
External communications parts list 2–24
Programming parts diagram 2–25
Programming parts list 2–25
Card encoder parts diagram 2–26
Card Encoder parts list 2–26
Lock external power supply parts diagram 2–26
Lock external power supply parts list 2–26
Special tools diagram 2–27
Special tools parts list 2–27
Function descriptions 2–28
HV Locks 2–28
KV Lock 2–29
Function conversion 2–30
34HV/35HV knob/lever conversion 2–31
Reader conversion 2–32
HV reader conversion 2–32
KV reader conversion 2–34
Replacing parts 2–36
Replacing batteries 2–36
Removing and reinstalling the inside and outside trim 2–38
Replacing the wire harnesses 2–39
Replacing the inside circuit board 2–42
Replacing the card reader or keypad reader 2–42
Replacing the PROM 2–44
TROUBLESHOOTING 3–1
Emergency operations 3–1
How do you enable communications if you have lost the token or forgotten
the password? 3–1
How do you open a lock after a complete battery failure? 3–2
Troubleshooting the V Series Electronic Lock 3–4
Troubleshooting the V Series Controller 3–7
For readers with red and green LEDs and no sounder 3–7
For readers with a dual red/green LED and sounder 3–9
Contents
V Series Service Manual iii
Alarm troubleshooting 3–11
GLOSSARY A–1
SECURITY DEVICE HISTORY EVENT TYPES B–1
INSTALLATION INSTRUCTIONS C–1
INDEX D–1
Contents
iv V Series Service Manual
V Series Service Manual v
FIGURES
SECURITY DEVICE MAINTENANCE
8KV/9KV magnetic stripe trim exploded diagram 2–2
8KV, 9KV keypad trim exploded diagram 2–4
8KV/9KV proximity trim exploded diagram 2–6
8KV/9KV chassis exploded diagram 2–8
34/35HV magnetic stripe trim exploded diagram 2–10
34/35HV keypad trim exploded diagram 2–13
34/35HV proximity trim exploded diagram 2–16
34/35HV case with deadbolt exploded diagram 2–19
34/35HV case without deadbolt exploded diagram 2–21
XV controller exploded diagram 2–23
External communications exploded diagram 2–24
Programming parts 2–25
Card Encoder parts 2–26
Lock external power supply parts 2–26
Special tools 2–27
Removing and replacing the battery compartment cover 2–37
Disconnecting the old battery pack 2–37
Removing the inside trim 2–38
Orienting the communication port 2–41
Prying one corner of the PROM part way out of the socket
[V Series electronic lock shown] 2–45
Prying the opposite corner of the PROM 2–45
Inserting the new PROM 2–46
Figures
vi V Series Service Manual
TROUBLESHOOTING
Enabling communications using the DIP switches 3–2
Connecting the palmtop cable to the base of the lock 3–3
V Series Service Manual 1–7
1GETTING STARTED
INTRODUCTION
The V Series Service Manual contains essential
information to help you maintain your 8KV, 9KV,
30HV stand-alone locks, and the XV Controller.
CERTIFICATIONS AND STANDARDS
HV and KV
Locks
■The strike fits the standard door frame cutout as
specified in ANSI A115.1.
■The faceplate dimensions fit the standard door
preparation as specified in ANSI A115.1.
■The locks comply with the following:
▲FCC CFR 47 Part 15, Subpart C for Intentional
Radiators
▲CES–003 Canadian EMI Requirements
▲IEC 61000–4–2 (1995) ESD Immunity
▲IEC 61000–4–3 (1995) RD Immunity
▲IEC 61000–4–4 (1995) EFT Immunity
▲International Safe Transit Association–
Procedure 1A
▲Humidity Test RTCA/DO–160C–Extended
Humidity.
Getting Started
1–8 V Series Service Manual
V Series
Controller
The controller complies with the following:
■FCC CFR 47 Part 15, Subpart C for Intentional Radiators
■CES–003 Canadian EMI Requirements
■IEC 61000–4–2 (1995) ESD Immunity
■IEC 61000–4–3 (1995) RD Immunity
■IEC 61000–4–4 (1995) EFT Immunity
■International Safe Transit Association–Procedure 1A
■Humidity Test RTCA/DO–160C–Extended Humidity.
DOCUMENTATION PACKAGE
The following documentation is available to help you with the
installation, start-up, and maintenance of the V Series System. To order a
document, contact your BEST representative.
The installation instructions for the locks and controller also can be
ordered separately:
The templates required for lock installations also can be ordered
separately:
Document Title Doc. No.
8KV/9KV Installation Instructions T61918
30HV Installation Instructions T61919
XV Controller Installation Instructions T61920
Document Title Doc. No.
Installation Template for 83KV/93KV Locksets T61921
Installation Template for 34HV–35HV Locksets T61922
Installation Specifications for 34HV–35HV
Locks/Hole Pattern Chart for 34HV–35HV Locks
T61923
V Series Controller Drilling Template T61924
Andere Handbücher für V Series
1
Inhaltsverzeichnis
Andere BEST ACCESS SYSTEMS Sperren Handbücher
BEST ACCESS SYSTEMS
BEST ACCESS SYSTEMS 82T Bedienungsanleitung
BEST ACCESS SYSTEMS
BEST ACCESS SYSTEMS Keypad EZ Remote Unlock Bedienungsanleitung
BEST ACCESS SYSTEMS
BEST ACCESS SYSTEMS 6K Series Bedienungsanleitung
BEST ACCESS SYSTEMS
BEST ACCESS SYSTEMS 1E Series Bedienungsanleitung
BEST ACCESS SYSTEMS
BEST ACCESS SYSTEMS 9KQ Bedienungsanleitung
BEST ACCESS SYSTEMS
BEST ACCESS SYSTEMS 72T Bedienungsanleitung
BEST ACCESS SYSTEMS
BEST ACCESS SYSTEMS 75KC Bedienungsanleitung
BEST ACCESS SYSTEMS
BEST ACCESS SYSTEMS 7K Bedienungsanleitung
BEST ACCESS SYSTEMS
BEST ACCESS SYSTEMS 6S Bedienungsanleitung
BEST ACCESS SYSTEMS
BEST ACCESS SYSTEMS 45HQ Bedienungsanleitung
