BFT Rigel 6 QRG Bedienungsanleitung

Rigel 6 QRG

Quick reference guides are not a replacement for the supplied instructions, they are

supplementary.

Read and understand the installer warnings in the main instruction document first.

Always apply good safe, state of the art engineering and electrical installation principles.

Safety of the completed installation is the ultimate responsibility of the installer.

This product is not suitable for DIY use and should only be installed and maintained by a

trained, skilled, professional installer.

What's New

ØMulti coloured cable connections in line with current control

panels.

ØBuilt in 7 day time clock.

Ø4 Chanel radio receiver.

ØFacility to remove individual transmitters.

ØMagnetic lock powered constantly during closing cycle.

ØU Link.

Ø6 safe inputs, Safe 1&2 8K2.

ØReset-able low voltage fuse.

ØAuto-set for both Hydraulic & Electro-mechanical motors.

ØObstacle Detection (electro-mechanical motors ONLY).

ØGate open/close buttons on control board.

ØError messages on cover lid and on control panel (30 errors)

Terminal Layout

Rigel 5 to Rigel 6 (terminal numbers)

Motor Connections

Old Rigel 5 New Rigel 6

Motor 1, 10,11,12, opens first followed by Motor 2,

14,15,16, Motor 2 closes first followed by Motor 1

Capacitor is connected across motor winding M1=10 &12

M2=14 &16

Rigel 6 common connections

50#

51#

52#

70#

71#

72#

20#

21#

11#

12#

14#

15#

16#

10#

22#

23#

24#

25#

26#

27#

28#

29#

60#

61#

62#

63#

64#

65#

73#

74#

75#

76#

77#

78#

M2#

M1#

Capacitor!

8K2#resistive,#70-72#or#70-74,#Logic#8#

51#

50#

51#

52#

Desme##

75#&#76#SAFE#3#=#004#

Photo#cells,#active#closing#only#

Ic#Inputs#1,2,3,4,#

Mag#Lock#or#

CISA#

Menu System

= Quick Menu X 2 Rapidly = Traditional Menu

To enter the traditional Menu press the OK button twice rapidly, Halt > OK

> Follow user guide OK > Para >Logic>Radio>Default

Quick Menu Layout

This will provide a working system

Method (2 motor application)

• Motor 1 opens first followed by motor 2, motor 2 closes first followed by motor

• Capacitor is connected across 10 & 12 M1, 14 & 16 M2

• Single leaf applications use Motor 1 output 10,11,12.

• Set the motors in place on the gate with the correct geometry

• Install any gate stops to be used(mandatory for hydraulics-except Lux FC)

• Manual release and set limit switch positions (Igea only)

• Connect up the motor supply cables to the Blue connectors 10,11,12 & 14,15,16

•Do NOT connect any accessories at this stage and leave all factory links fitted

• Position gates in the closed position, Sub Lux P Series, Kustos Igea. Eli 250 leave

in the factory set position

• Navigate to the Autoset menu and launch the Autoset ( see following page)

• Autoset can also be launched from the traditional menu (OK button twice)

Autoset from

Program panel to Autoset and press OK, 3,2,1. motor 1 will open, when the

open position is reached press the OK button 3.2.1. motor 2 will open, when

the open position is reached press the OK button.

With showing press the OK button 3.2.1, motor 2 will close, when the

closed position is reached press the OK button 3.2.1. motor 1 will close,

when the closed position is reached press the OK button.

With showing press the OK button 3.2.1. motor 1 will open followed by motor

2, from the open position motor 2 will close first followed by motor 1, upon

completion OK will be displayed.

If the motors try to close at the launch of the Autoset then the motor cables must be

swapped 10&12, 14&16. When a gate system is powered for the first time or after a

power cut, the gates must move to the open position when a command is given.

Increase the working time in the Parameter menu under work t if required

Inhaltsverzeichnis

Andere BFT Bedienfeld Handbücher

BFT

BFT SHYRA AC SL Bedienungsanleitung

BFT

BFT ALENA SW2 CPEM Bedienungsanleitung

BFT

BFT SHYRA AC SL Bedienungsanleitung

BFT

BFT LEO-D-MA Bedienungsanleitung

BFT

BFT ZARA BTL2 Bedienungsanleitung

BFT

BFT THALIA P Bedienungsanleitung

BFT

BFT ZARA BTL2 Bedienungsanleitung

BFT

BFT HYDRA-N Bedienungsanleitung

BFT

BFT ALENA ACL2 Bedienungsanleitung

BFT

BFT VENTIMIGLIA NS Bedienungsanleitung

BFT

BFT ZARA BT A80 Bedienungsanleitung

BFT

BFT LEO B CBB 3 400 W01 Bedienungsanleitung

BFT

BFT HYDRA-R Bedienungsanleitung

BFT

BFT ALTAIR-P Bedienungsanleitung

BFT

BFT SHYRA AC F SL Bedienungsanleitung

BFT

BFT ZARA BTL2 Bedienungsanleitung

BFT

BFT LIBRA-C-LX Bedienungsanleitung

BFT

BFT ALCOR AC A Bedienungsanleitung

BFT

BFT LEO B CBB 3 230 L02 Bedienungsanleitung

BFT

BFT HYDRA Bedienungsanleitung

BFT

BFT LEO B CBB DL2 3 230 L02 Bedienungsanleitung

BFT

BFT SHYRA AC F SL Bedienungsanleitung

BFT

BFT ALPHA Bedienungsanleitung

BFT

BFT THALIA BT A80 Bedienungsanleitung

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

Trane

Trane ComfortLink II XL950 Control Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten