BGS technic 1977 Bedienungsanleitung

SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0

F56essartSresukreveL ax +49 (0) 2191 / 46438-40

ed.lhatsws@ofni:liaM-EdiehcsmeR79824-D

Instruction Manual

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

[email protected]

www.bgstechnic.com

Art. 1977

Hydraulic Jack

TECHNICAL DATA

item capacity min. hight max. hight

pind

length lifting hight

1977

2 t.

210 mm

520 mm

65 mm

245 mm

WARNING AND SAFETY INFORMATION

This lifter may only be used if you have read and understood the manual. Always follow the

manual.

Never exceed the mentioned lifting load.

Use only on hard, flat level surface.

The brakes of the vehicle must be locked and the steering wheel must be in a straight position.

The jack is designed only for lifting, after lifting; the car must be placed on axle stands

Make sure that the vehicle may be raised only at the vehicle manufacturer's specified points.

When raising no person must be inside, on or under the vehicle.

Only use original tube for lifting, do not use any extension bars

Any changes or modifications to the jack are forbidden

Failure to observe these warnings may lead to serious physical and / or property damage

MAINTENANCE

Lubricate the ram. linkages, saddle and pump mechanism with light oil.

Visually inspect for cracked welds, bent, loose, missing parts or hydraulic oil leaks

The product shall be inspected immediately if it is believed to have been subjected to abnormal

load or shock.

Any hydraulic jack found damaged in any way, is found to be worn or operates abnormally shall

be removed from service until repaired by an authorized customer service.

Clean all surfaces and maintain all labels and warnings.

Check the ram every three months for any sign of rust or corrosion.

Clean as needed and wipe with an oil cloth.

When not in use, always leave the saddle and ram all the way down.

SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0

F56essartSresukreveL ax +49 (0) 2191 / 46438-40

ed.lhatsws@ofni:liaM-EdiehcsmeR79824-D

Instruction Manual

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

[email protected]

www.bgstechnic.com

USE OF THE JACK

Lifting:

1. Turn the drain valve, in the picture marked in red,with the actuating tube clockwise until you

feel a resistance.

2. Position the vehicle on a flat level surface, brakes must be locked and adjust the steering

wheel in straight-ahead position.

3. Put on the lift to the designated point by the car manufacturer. The amount can be offset with

the spindle

4. Take care when lifting that no persons in the work area.

5. The lifter is designed for lifting vehicles, so after lifting use axle stands.

Down:

1. The vehicle can be drained by turning the drain valve, in the picture in red,counterclockwise.

2. Make sure that no persons residing in the work area and are no longer objects under the

vehicle.

3. Lower the jack always completely down to protect the cylinder.

CHECK HYDRAULIC OIL

1. Turn release valve counter clockwise to allow ram to fully retract. It may be necessary to apply

force to the saddle for lowering

2. Stand jack in vertical position with handle socket down.

3. Remove the oil fill plug

4. The oil should be level with the bottom of fill hole. If not, top off.

5. Do not overfill. Always fill with new, dean hydraulic jack oil.

6. Replace fill plug

7. Check jack operation.

SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0

F56essartSresukreveL ax +49 (0) 2191 / 46438-40

ed.lhatsws@ofni:liaM-EdiehcsmeR79824-D

CE-Erklärung

BGS technic KG

Bandwirkerstr. 3

42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

[email protected]

www.bgstechnic.com

EU-Konformitätserklärung

EC DECLARATION OF CONFORMITY

Wir erklären in alleiniger Verantwortung, dass die Bauart der:

We declare that the following designated product:

Hydraulischer Wagenheber ( BGS Art. 1977 )

Bottle Jack TH810001

folgenden einschlägigen Bestimmungen entspricht:

complies with the requirements of the:

Council Directive 2006/42/EC

Angewandte Normen:

Identification of regulations / standards:

EN 1494/A1:2008

Attestation: M8A 10 02 23747 127

Test Report : 704000718405-01

Wermelskirchen, den 18.11.2011

ppa.

Frank Schottke, Prokurist

BGS technic KG, Bandwirkerstrasse 3, D-42929 Wermelskirchen

Andere Handbücher für 1977

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere BGS technic Jack Handbücher

BGS technic

BGS technic 8604 Bedienungsanleitung

BGS technic

BGS technic 2889 Bedienungsanleitung

BGS technic

BGS technic 9255 Bedienungsanleitung

BGS technic

BGS technic 74288 Bedienungsanleitung

BGS technic

BGS technic 1977 Bedienungsanleitung

BGS technic

BGS technic 7873 Bedienungsanleitung

BGS technic

BGS technic 7872 Bedienungsanleitung

BGS technic

BGS technic 9784 Bedienungsanleitung

BGS technic

BGS technic 2897 Bedienungsanleitung

BGS technic

BGS technic 9252 Bedienungsanleitung

BGS technic

BGS technic 2888 Bedienungsanleitung

BGS technic

BGS technic 70040 Bedienungsanleitung

BGS technic

BGS technic 70039 Bedienungsanleitung

BGS technic

BGS technic 2884 Bedienungsanleitung

BGS technic

BGS technic 2883 Bedienungsanleitung

BGS technic

BGS technic 70033 Bedienungsanleitung

BGS technic

BGS technic 70041 Bedienungsanleitung

BGS technic

BGS technic 70042 Bedienungsanleitung

BGS technic

BGS technic 9793 Bedienungsanleitung

BGS technic

BGS technic BGS 70029 Bedienungsanleitung

BGS technic

BGS technic 9232 Bedienungsanleitung

BGS technic

BGS technic 1975 Bedienungsanleitung

BGS technic

BGS technic 9784 Bedienungsanleitung

BGS technic

BGS technic 2885 Bedienungsanleitung

Beliebte Jack Handbücher anderer Marken

Omega Lift Equipment

Omega Lift Equipment 18122C Gebrauchsanweisung

Pittsburgh

Pittsburgh 58816 Montageanleitung

Unimec

Unimec TP Bedienungsanleitung

Sonic

Sonic 4800703 Bedienungsanleitung

TradeQuip

TradeQuip 1128T Bedienungsanleitung

VEVOR

VEVOR TJD-12000SP-F Bedienungsanleitung

ULTIMATE SPEED

ULTIMATE SPEED URW 2 A1 HYDRAULIC TROLLEY JACK Bedienungsanleitung

Stels

Stels 51131 Bedienungsanleitung

Valex

Valex 1650520 Bedienungsanleitung

Clarke

Clarke CTJ2500QLG Installations- und Betriebshandbuch

Pfaff

Pfaff Merkur M0 Bedienungsanleitung

Beta

Beta 3050/K Beilage

Sealey

Sealey 1050CXHV Bedienungsanleitung

Jung

Jung JH Series Bedienungsanleitung

URIAH

URIAH UC200020 Bedienungsanleitung

Kennedy

Kennedy KSJ010 Bedienungsanleitung

Grizzly

Grizzly H8097 Bedienungsanleitung

SW-Stahl

SW-Stahl 20700L Bedienungsanleitung