Biamp TesiraLUX IDH-1 Bedienungsanleitung

TesiraLUX IDH-1 & OH-1

OPERATION MANUAL

September 2017

TesiraLUX IDH-1 and OH-1 Product Description

The TesiraLUX IDH-1 is an AVB/TSN enabled video encoder capable of transmitting video signals up to

and including 4K60. The IDH-1 functions as a server-class device in a Tesira media system and is

configured through the Tesira software. Acting as an AVB talker, the IDH-1 fully integrates digital audio

and video on a single network, allowing for simplified lip sync management and transmission latencies

(including scaling) of less than 2 frames. Integrated design, configuration, and control is facilitated via a

single software platform, reducing the design time needed to deploy media systems. Multiple software-

based options are available for managing bandwidth, including setting the maximum resolution, frame

rate floor, and/or a rate of compression. The AVB/TSN signal transmission can be switched over 1Gb or

10Gb ports while control signals are managed via a separate 1Gb Ethernet port. The IDH-1 accepts 8

channels of PCM audio for embedding/ de-embedding, and includes 2 mic/line level analog inputs. The

TesiraLUX IDH-1 is well suited for legal proceedings, lecture halls, multi-use spaces and other

applications where low latency, synchronized media distribution is needed.

The TesiraLUX OH-1 is an AVB/TSN enabled video decoder capable of outputting video signals up to

and including 4K60. The OH-1 functions as a server-class device in a Tesira media system and is

configured through the Tesira software. Acting as an AVB listener, the OH-1 fully integrates digital audio

and video on a single network, allowing for simplified lip sync management and transmission latencies

(including scaling) of less than 2 frames. Integrated design, configuration, and control is facilitated via a

single software platform, reducing the design time needed to deploy media systems. The AVB/TSN signal

reception can be over 1Gb or 10Gb ports while control signals are managed via a separate 1Gb Ethernet

port. The OH-1 accepts 8 channels of PCM audio for embedding/de-embedding, and includes 2 mic/line

level analog outputs. The TesiraLUX OH-1 is well suited for legal proceedings, lecture halls, multi-use

spaces and other applications where low latency, synchronized media distribution is needed.

TesiraLUX IDH-1 and OH-1 Setup and Installation

Setup and Use

The Tesira Software provides configuration for the TesiraLUX devices in a Tesira system. The information

supplied by this manual relates to front panel operation and physical connections. For more details on

software setup, please consult the Tesira Help File.

Installation

Install the unit away from heat sources, such as hot air vents and radiators, and in spaces with adequate

ventilation. Ensure that air can circulate freely through the front ventilation fan intake and the rear and

side exhausts are not obstructed. Do not exceed the maximum ambient operating temperature of 32° -

108° F (0° - 42°C). Be aware of conditions in an enclosed rack or cabinet that may cause the temperature

to exceed ambient room conditions. It is further recommended that if the unit is not to be mounted flat

then the unit is mounted with the side exhausts uppermost.

TesiraLUX IDH-1 and OH-1 Front View

TesiraLUX IDH-1 and OH-1 Front Panel

1 – Ventilation fan

2 – LED status indicators

3 – Display navigation buttons

4 – OLED display

Ventilation Fan

Each device has a perforated cover to allow cool air into the chassis. A variable speed, temperature

controlled fan allows air into the front of the unit and out of the rear left side and right side. Ensure that

nothing obstructs the front or side of the unit.

LED Status Indicators

Five multi-color LEDs on the front panel of the device provide information about the status of the device

and the wider Tesira system.

•Power – Reports power of the host device and Front Panel Display.

•Alarm – Reports abnormal conditions local to the host device.

•Activity – Reports the activity of host device within the greater system.

•Status – Reports the status of host device.

•AIS (Alarm in System) – Reports abnormal conditions within the wider system.

LED Off Green Yellow Red

Power Unit is not powered Unit is powered --

Alarm No fault is active in the

device

Minor fault is active in

the device

Major fault is active

in the device

Activity

The host device is an

active part of an active

system

The host device is part

of an inactive system

(Audio is stopped) or

host device is not part

of a system

Status

Device has received its

configuration and is ready

to participate in the system

Device is ready and

waiting to receive a

configuration

Device is not ready to

receive its configuration

AIS

(Al

m n System)

No fault is active in any

device in the system

Minor fault is active in

a device in the system

Major fault is active in

a device in the system

TesiraLUX IDH-1 and OH-1 Front View

Display Navigation Buttons

Capacitive-touch buttons allow navigation through the OLED display menu to view and configure device

and networking information, as well as see system-wide faults. Navigating the display is done using

touch-sensitive UP and DOWN and SELECT buttons.

OLED Display

The OLED display provides information about the server device as well as the Tesira system that is

connected to the server. The OLED display is read-only.

Home Screen

The home screen is the default screen that shows the overview of the device. If the text is too long to fit

on the entire display, it will scroll to the left. Menus at the bottom allow other selections. The main menu

icon is selected by default.

Some menu icons double as status indicators. They change depending on the status of the device. The

fault status icon only appears if there is an active fault in the system.

After a period of inactivity, the Front Panel Display will transition back to this home screen.

1. Device description

2. Host Name and IP address

3. Main Menu

4. Network Menu / Status

5. Faults ( - Only shown if Faults are present)

To open any of the menus, use the UP and DOWN buttons to highlight the menu icon desired, and press

the SELECT button.

Menu Screen

A menu screen containing a list of sub-menu items is accessible from the home screen. On the right are

icons that provide quick navigation to other screens. Pressing the select button on an item will transition

to the screen that displays that information. A scroll indicator at the left shows if there is more information

to show by scrolling down.

Device Information

The device information screen shows the following information:

•Device description

•Host name

•Serial number

•Firmware version

TesiraLUX IDH-1 and OH-1 Front View

System Information

The system information screen shows the following information:

•Device audio state (on/off)

•System description

Network Parameters

The network parameters screen shows the following information

•Host name

•IP address

•Subnet mask

•Gateway

Display Settings

The display settings screen allows you to change the behavior of the OLED screen. Options include the

following:

•Change brightness and contrast

•Change timeout duration in seconds

After the display timeout is reached the display will go blank. The device will still have power in this state

even though the display appears blank. Wake the display by pushing any button.

Faults

If a fault is present in the system an exclamation icon shown on the lower right of the screen. Selecting

the fault icon and pressing the select button will show the Faults screen. Each unique fault in the system

will be listed.

Localization

All menus and error messages are displayed in English by default. Descriptive icons are used to avoid the

need for messages in specific languages. Text entered (e.g. Device Description) will be displayed in the

language as entered in the software.

The following alphabets are supported:

•Latin-1 (ISO/IEC 8859-1) and Latin-2 (ISO/IEC 8859-2)

•Cyrillic (Russian alphabet only)

•Simplified Chinese

•Japanese – Hiragana, Katakana, Kanji

•Thai

TesiraLUX IDH-1 and OH-1 Rear View

TesiraLUX IDH-1 (Rear Panel View)

TesiraLUX OH-1 (Rear Panel View)

1. AC power inlet (100 – 240V) 6. Gigabit Ethernet control port (RJ-45)

2. RS-232 serial port 7. Gigabit AVB Media Port (RJ-45)

3. GPIO connections 8. 10Gigabit AVB Media Port (SPF+)

4. Mic/line level balanced analog audio

connections

IDH-1 – 2x Input

OH-1 – 2x Output

9. High-Definition Multimedia Interface Port

(HDMI)

5. Ventilation 10. DisplayPort (DP)

TesiraLUX IDH-1 Specifications

IDH-1

Control Connection: RJ-45 with Ethernet cable

(Minimum Cat 5e)

Media Connections:

1Gb:

10Gb:

RJ-45 with Ethernet

(Minimum Cat 5e)

10GbE SFP+

Video Inputs:

Supported Resolutions:

Physical Interfaces:

Color Space:

Color Formats

HDR Support

Chroma Subsampling

Color Depth

System Transit Latency

HDMI Audio Formats:

Up to 4096x2160p60

Full mode table at

Biamp.com

HDMI, DisplayPort

Up to Rec. 2020

YUV, RGB

HDR10 Ready

4:4:4, 4:2:2, 4:2:0

8-bit, 10-bit, 12-bit, 16-bit

< 2 frames (33ms)

8ch PCM

Logic I/O:

Logic Input Trigger:

LED Driver:

Logic Output Type:

Contact Closure or 5V TTL

5V/10mA per output

Open Collector;

Sink 40V/300mA per output

RS-232: 115200 / 8-N-1

Overall Dimensions:

Height:

Width:

Depth:

Weight:

1.75 inches (44 mm)

8.5 inches (216 mm)

10.4 inches (264 mm)

4 lbs (1.81 kg)

Environmental:

Ambient Operating

Temperature Range:

Humidity:

Altitude:

32 - 104⁰F (0 - 40⁰C)

0 – 95% relative humidity

(non-condensing)

0 – 10,000 ft. (0 – 3000 m)

MSL

Analog Audio Inputs:

Frequency Response

(20Hz~20kHz @ +4dBu):

THD+N (20Hz~20kHz)

@0dB Gain, +4In:

@54dB Gain, -50dBu In:

EIN (20Hz~20kHz, 66dB

Gain, 150Ω):

Dynamic Range

(20Hz~20kHz, 0dB):

Input Impedance (Balanced):

Maximum Input:

Input Gain Range (6dB

Steps):

Crosstalk, channel to channel,

1kHz

0dB gain, +4dBu input:

54dB gain, -50dBu input:

Sampling Rate:

A/D Converters:

+0/-0.25dB

< 0.006%

< 0.040%

< -125dBu

> 108dB

8kΩ

+24dBu

0 – 66dB

< -85dB

< -75dB

48kHz

24-bit

Phantom Power: +48 VDC (7mA/input)

Power Consumption (100 –

240 VAC 50/60Hz):

25W

Compliance: FCC Part 15B (

USA

)

UL & C-UL (

USA &

Canada

)

CE Marked (

Europe

)

ROHS Directive (

Europe

)

TesiraLUX OH-1 Specifications

OH-1

Control Connection: RJ-45 with Ethernet cable

(Minimum Cat 5e)

Media Connections:

1Gb:

10Gb:

RJ-45 with Ethernet

(Minimum Cat 5e)

10GbE SFP+

Video Outputs:

Supported Resolutions:

Physical Interfaces:

Colors Space:

Color Formats

HDR Support

Chroma Subsampling

Color Depth

System Transit Latency

HDMI Audio Formats:

Up to 4096x2160p60

Full mode table at

Biamp.com

HDMI

Up to Rec. 2020

YUV, RGB

HDR10 Ready

4:4:4, 4:2:2, 4:2:0

8-bit, 10-bit, 12-bit, 16-bit

< 2 frames (33ms)

8ch PCM

Logic I/O:

Logic Input Trigger:

LED Driver:

Logic Output Type:

Contact Closure or 5V TTL

5V/10mA per output

Open Collector;

Sink 40V/300mA per output

RS-232: 115200 / 8-N-1

Overall Dimensions:

Height:

Width:

Depth:

Weight:

1.75 inches (44 mm)

8.5 inches (216 mm)

10.4 inches (264 mm)

4 lbs (1.81 kg)

Environmental:

Ambient Operating

Temperature Range:

Humidity:

Altitude:

32 - 104⁰F (0 - 40⁰C)

0 – 95% relative humidity

(non-condensing)

0 – 10,000 ft. (0 – 3000 m)

MSL

Analog Audio Outputs:

Frequency Response

(20Hz~20kHz @ +4dBu):

THD+N (20Hz~20kHz):

Dynamic Range

(20Hz~20kHz, 0dB):

Output Impedance

(Balanced):

Maximum Output:

Crosstalk, channel to channel,

1kHz:

Sampling Rate:

D/A Converters:

+0/-0.25dB

< 0.0035%

> 110dB

200Ω

+24dBu

< -95dB

48kHz

24-bit

Power Consumption (100 – 240

VAC 50/60Hz):

25W

Compliance:

FCC Part 15B (

USA

)

UL & C-UL (

USA &

Canada

)

CE Marked (

Europe

)

ROHS Directive (

Europe

)

Notes Page

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Biamp Medienkonverter Handbücher

Biamp

Biamp Vocia TTS-1e Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung