Billion BIPAC- 8500 Bedienungsanleitung

BIPAC- 8500 / 8520

SHDSL VPN Firewall Bridge / Router

Quick Start Guide

Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router

Package Contents

BIPAC-8500 / 8520 SHDSL Bridge / Router

CD-ROM containing the online manual

RJ-11 SHDSL / telephone Cable

Ethernet (CAT-5 LAN) Cable

Console (PS2-RS232) Cable

AC-DC power adapter (12VDC, 1A)

This Quick Start Guide

 Do not use the BIPAC-8500 / 8520 in high humidity or high

temperatures.

 Do not use the same power source for the BIPAC-8500 / 8520 as

other equipment.

 Do not open or repair the case yourself. If the BIPAC-8500 /

8520 is too hot, turn off the power immediately and have it

repaired at a qualified service center.

Warning

 Place the BIPAC-8500 / 8520 on a stable surface.

 Only use the power adapter that comes with the package. Using

a different voltage rating power adaptor may damage the router.

ttention

For more detailed instructions on configuring and using

the SHDSL Firewall Bridge / Router, please refer to the

on-line manual.

Quick Start Guide

The Front LEDs

LED Meaning

LINE 1 & 2

Lit when successfully connected to SHDSL line and it is

synchronized.

3 LAN Port

1X — 4X

(RJ-45 connector)

Lit when connected to an Ethernet device.

Green for 100Mbps; Orange for 10Mbps.

Blinking when data is Transmitted / Received.

4 SYS Lit when the system is ready.

5 PWR Lit when power is ON.

Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router

The Rear Ports

Port Meaning

1 Power Switch Power ON/OFF switch

2 PWR Connect the supplied power adapter to this jack.

3 RESET

After the device is powered on, press it to reset the device or

restore to factory default settings.

0-3 seconds: reset the device

6 seconds above: restore to factory default settings (this is used

when you can not login to the router, e.g. forgot the password)

4 LAN

1X — 4X

(RJ-45 connector)

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the

four LAN ports when connecting to a PC or an office/home

network of 10Mbps or 100Mbps.

5 CONSOLE Connect a PS2/RS-232 cable to this port when connecting to a

PC’s RS-232 port (9-pin serial port).

6 LINE

1X — 2X

(RJ-11 connector

Connect the supplied RJ-11 (“telephone”) cable to this port when

connecting to the A SHDSL line.

＊Only the BIPAC-8520 has two Line jack ports. BIPAC-8500 has one.

Quick Start Guide

Connecting Your SHDSL Bridge / Router

1. Connect the Router to a LAN (Local Area Network) and the SHDSL LINE.

2. Power on the device.

3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN and LINE

LED are lit.

Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router

Configuring PC in Windows XP

1. Go to Start / Control Panel (in Classic

View). In the Control Panel, double-click on

Network Connections

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window, click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows 2000

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

Dial-up Connections.

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router

Configuring PC in Windows 98/Me

1. Go to Start / Settings / Control Panel. In

the Control Panel, double-click on Network

and choose the Configuration tab.

2. Select TCP/IP ->

NE2000 Compatible, or the name of your

Network Interface Card (NIC) in your PC.

3. Select the Obtain an IP address

automatically radio button.

4. Then select the DNS Configuration tab.

5. Select the Disable DNS radio button and

click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows NT4.0

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

choose the Protocols tab.

2. Select TCP/IP Protocol and click

Properties.

3. Select the Obtain an IP address from a

DHCP server radio button and click OK.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Billion Netzwerk-Router Handbücher

Billion

Billion VoIP/(802.11g) ADSL2+ Router BiPAC 7300VGP Bedienungsanleitung

Billion

Billion BiPAC 7100 Bedienungsanleitung

Billion

Billion BiPAC 7300G Bedienungsanleitung

Billion

Billion BiPAC 7300 RA Bedienungsanleitung

Billion

Billion BiPAC 5200N RC Bedienungsanleitung

Billion

Billion MWEB W40 Bedienungsanleitung

Billion

Billion BiPAC 710C2 Bedienungsanleitung

Billion

Billion BiPAC 7202 Bedienungsanleitung

Billion

Billion BiPAC 7800GZ(L) Bedienungsanleitung

Billion

Billion BiPAC 4700AZ Bedienungsanleitung

Billion

Billion BiPAC 7401V(G)P R4 Bedienungsanleitung

Billion

Billion BiPAC 8501 R3 Bedienungsanleitung

Billion

Billion BiPAC 7404V series Bedienungsanleitung

Billion

Billion BiPAC 7402(G)X(L) Series Bedienungsanleitung

Billion

Billion BiPAC 7560G Bedienungsanleitung

Billion

Billion BiPAC 7800GZ(L) Bedienungsanleitung

Billion

Billion BiPAC 7402NX Bedienungsanleitung

Billion

Billion BiPAC 7800 Bedienungsanleitung

Billion

Billion BiPAC 6300VNP Bedienungsanleitung

Billion

Billion BiPAC 5210S RC Betriebsanleitung

Billion

Billion BIPAC 7402W Bedienungsanleitung

Billion

Billion BIPAC 7100G Bedienungsanleitung

Billion

Billion BiPAC 8501 Bedienungsanleitung

Billion

Billion 7560 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Dynacord

Dynacord Promatrix 6000 Bedienungsanleitung