Billion VoIP/(802.11g) ADSL2+ Router BiPAC 7300VGP Bedienungsanleitung

BiPAC 7300VP/ 7300VGP

VoIP/(802.11g) ADSL2+ Router

Quick Start Guide

Billion BiPAC 7300VGP Series ADSL2+ Router

For more detailed instructions on configuring and using

the VoIP/802.11g ADSL2+ Router, please refer to the

on-line manual.

Package Contents

VoIP/(802.11g) ADSL2+ Router

CD-ROM containing the on-line manual

RJ-11 ADSL/telephone Cable

Ethernet (CAT-5 LAN) Cable

AC-DC power adapter (12VDC, 1.2A)

This Quick Start Guide

Warning

 Do not use the BiPAC 7300VGP Series in high humidity or high

temperatures.

 Do not use the same power source for the BiPAC 7300VGP

Series as other equipment.

 Do not open or repair the case yourself. If the BiPAC 7300VGP

Series are too hot, turn off the power immediately and have it

repaired at a qualified service center.

 Avoid using this product and all accessories outdoors.

ttention

 Place the BiPAC 7300VGP Series on a stable surface.

 Only use the power adapter that comes with the package. Using

a different voltage rating power adaptor may damage the router.

Quick Start Guide

The Front LEDs

LED Description

1 PWR：Lights when the power is ON.

2 SYS：Lights when the system is ready.

3-6 LAN Port

1-4：

Steady glow when connected to an Ethernet device.

Glows green for 100Mbps; Orange for 10Mbps.

Blinking light when data is Transmitted / Received.

7 WLAN：

(7300VGP

only)

Lit green when the wireless connection is established.

Flashes when sending/receiving data.

8-9 Phone：Lit green when the phone is off-hook.

10 LINE：Lit when the inbound and outbound calls transmitted

through PSTN.

11 VoIP：Lit when SIP registration is OK.

12 PPP：Steady glow when there is a PPPoA / PPPoE connection.

13 ADSL：Lights when successfully connected to an ADSL DSLAM

(linesync).

Billion BiPAC 7300VGP Series ADSL2+ Router

The Rear Ports

8 67 5 43 1

Port Description

1 Power

Switch Power ON/OFF switch.

2 PWR Connect the supplied power adapter to this jack.

3 RESET

After the router is powered on, press this recessed button using

the end of paper clip or other small pointed object to reset the

router or to restore it to factory default settings.

1. Recovery procedures for non-working routers (e.g. after a

failed firmware upgrade flash):

2. Recovery procedures for a lost web interface password:

4 LAN Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the

four LAN ports when connecting to a PC or an office/home

network of 10Mbps or 100Mbps.

5 Phone Connect RJ-11 cable to this port when connecting to an analog phone

set.

6 LINE Connect RJ-11 cable to this port when connecting to the telephone

wall jack

7 ADSL Connect the supplied RJ-11 (“telephone”) cable to this port when

connecting to the ADSL/telephone network.

8 Antenna

(7300VGP

only) Connect the detachable antenna to this port.

Quick Start Guide

Connecting BiPAC 7300VGP series

1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.

2. Power on the device.

3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit.

4. Connect an RJ11 cable to VoIP port when connecting to an analog phone set.

5. Connect an RJ11 cable to LINE port when connecting to the telephone wall jack

Billion BiPAC 7300VGP Series ADSL2+ Router

Configuring PC in Windows XP

1. Go to Start / Control Panel (in Classic

View). In the Control Panel, double-click on

Network Connections

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window, click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows 2000

1. Go to Start / Settings / Control Panel. In the Control

Panel, double-click on Network and Dial-up

Connections.

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Billion BiPAC 7300VGP Series ADSL2+ Router

Configuring PC in Windows 98/Me

1. Go to Start / Settings / Control Panel. In

the Control Panel, double-click on Network

and choose the Configuration tab.

2. Select TCP/IP ->

NE2000 Compatible, or the name of your

Network Interface Card (NIC) in your PC.

3. Select the Obtain an IP address

automatically radio button.

4. Then select the DNS Configuration tab.

5. Select the Disable DNS radio button and

click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows NT4.0

1. Go to Start / Settings / Control Panel. In

the Control Panel, double-click on Network

and choose the Protocols tab.

2. Select TCP/IP Protocol and click

Properties.

3. Select the Obtain an IP address from a

DHCP server radio button and click OK.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Billion Netzwerk-Router Handbücher

Billion

Billion BiPAC 7800 Bedienungsanleitung

Billion

Billion BiPAC 7402G Bedienungsanleitung

Billion

Billion MWEB W40 Bedienungsanleitung

Billion

Billion BiPAC 5100 Bedienungsanleitung

Billion

Billion BiPAC 7402X Series Bedienungsanleitung

Billion

Billion BIPAC-74x GE Series Bedienungsanleitung

Billion

Billion BiPAC 7404V series Bedienungsanleitung

Billion

Billion BiPAC 5210S Bedienungsanleitung

Billion

Billion BiPAC 7404VNOX Bedienungsanleitung

Billion

Billion BiPAC 8500 Bedienungsanleitung

Billion

Billion BiPAC 8500/8520 Bedienungsanleitung

Billion

Billion BiPAC 6300VNOZ Bedienungsanleitung

Billion

Billion BiPAC 7800GZ(L) Bedienungsanleitung

Billion

Billion BiPAC 5200 Bedienungsanleitung

Billion

Billion BiPAC 7300 Bedienungsanleitung

Billion

Billion BiPAC 8900X R3 Bedienungsanleitung

Billion

Billion BiPAC VGL Bedienungsanleitung

Billion

Billion 800VGT Bedienungsanleitung

Billion

Billion BiPAC 2070 Bedienungsanleitung

Billion

Billion BiPAC 7300NX Bedienungsanleitung

Billion

Billion BiPAC 4500NZ(L) Bedienungsanleitung

Billion

Billion BiPAC 4700ZU Bedienungsanleitung

Billion

Billion BiPAC 7402VGO Bedienungsanleitung

Billion

Billion BiPAC 7404VGOX Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Dynacord

Dynacord Promatrix 6000 Bedienungsanleitung