Billion BiPAC 7800(N)X(L) Bedienungsanleitung

Billion BiPAC 7800NXL

Setup Guide

Modem reference & light status sheet

On the front of your modem you will notice a number of lights. The below table

explains what each of these lights mean:

LABEL

ACTION

DESCRIPTION

[1] Internet

Solid Green

Device has connected to the Internet

Blinking Green

Data flow

Solid Red

Authentication failed

[2] DSL

Solid Green

DSL signal established

Blinking Green

Trying to achieve DSL signal

Off

No DSL signal

[3] Wireless

Solid Green

Wireless connection enabled

Blinking Green

Data flow

Solid Red

Wireless connection disabled

[3] WPS

Solid Green

WPS enabled

Blinking Green

Data flow

Off

WPS disabled

[4] Ethernet WAN

Solid Green

WAN connection established

Off

No WAN connection

[5] Ethernet (1-4)

Blinking Green

Connected via Ethernet

Solid Green

Data Flow

Off

No Ethernet Connection

[6] Power

Solid Green

Power is on

Off

Power is off

1. Getting started

Requirements

1. Any operating system is compatible, however depending on the version this

may affect your internet experience

2. Internet Explorer 6.0 or higher / Firefox 2.0 or higher

3. Ethernet network adapter

4. Wireless enabled computer (if you are using the wireless feature)

Connecting the Billion BiPAC 7800NXL to your computer

1. Connect the network cable to one of the yellow ports located at the back of

the modem; the other end will connect to your computer

2. Connect a telephone cable to the grey port labeled DSL at the back of the

modem, and connect the other end to your telephone wall socket

3. Finally, connect the power cable to your modem and the power adapter to

your power point. Press the power button to the "ON" state

The diagram below shows how the modem connects physically to your phone

line, computer and power point.

4. Now that the modem is connected to your computer, phone line, and is

powered on, you need to ensure that the lights on the modem indicate the

following:

Power ON

DSL ON

Ethernet (1-4) On or Blinking

A network icon will appear in your task bar, and you are now ready to setup

your Internet connection

Note: If you have already connected via Wi-Fi you will see the below icon instead.

Connecting filters

This filter is used when you need to plug a telephone and the modem in the same

telephone wall socket.

There are three ports on the central filter as follows:

Line This port connects to your telephone wall socket

ADSL This port connects to the modem's grey port labeled ADSL

Phone This port connects to a telephone or other telephony device

In the following diagram, you can see the splitter filter acts as a double adapter and

filter.

2. Configuring your modem

Logging in to your modem

1. Open your web browser (typically Internet Explorer/Chrome/Firefox/Safari)

and in the address bar enter the details:

http://192.168.1.254

2. You will be asked for a Username and Password. Enter the following login

details:

Username admin

Password admin

Configuring your ADSL modem to access the Internet

1. Once you have logged into your modem, the Billion home page will appear as

shown below. Click on the Quick Start tab on the left hand side to begin the

setup

2. Ensure following settings are set:

Main Port DSL

Layer2 Interface ATM

VPI/VCI 8/35

Type PPPoE

WAN IP Address Obtain an IP Address Automatically

3. Keep the option Manually selected for work type, as show below

4. Enter the Username and Password provided to you, and click on Continue

5. Please wait while the device is being configured

6. Once the settings have been successfully configured, you will now receive a

message to configure your wireless connection

7. To configure the wireless connection, ensure the following settings are

entered:

Wireless check box is ticked to Enable

SSID is named (this will be any name you wish to give to your Wireless

Network. By default this is set to wlan-ap)

WPA2 Pre Shared Key: This will ensure that in order to connect to your

wireless network a password will be required. Please enter a password

between 8 - 63 characters; this can contain letters and numbers

8. You will now receive a message that process is finished. On the bottom of the

page you will see an option to Restart the modem, please click on restart

9. Click on Restart with Current Settings selected to restart the modem

10. Please wait while the modem is restarting. This can take a few minutes so

please be patient. The following page will appear while the modem is

updating your details

11. Once connected the Internet, the modem light will turn on and flash to

indicate there is Internet traffic. Try browsing to a website such as

www.google.com to test your connection

3. Connecting the Billion 7800NXL to your

devices using wireless

In the previous section you have configured the wireless connection for your modem.

Please use your Wi-Fi Network Name (SSID) and Pre Shared Key (Password) to

connect to any wireless compatible devices you have.

How to connect to your Windows computer

1. In Windows, click on the Network icon located at the bottom right hand

corner of your screen as shown below. This will provide you with a list of

available wireless networks in your range

2. Look for the default Wi-Fi Network Name (SSID) in your wireless networks

list. The default Wi-Fi Network Name (SSID) is wlan-ap. If, in the previous

section you have chosen your own SSID, this name will be shown in the list

instead. Once you have selected the right connection, click Connect to

continue. You may want to also tick the box to connect automatically, so that

you will automatically connect to this Wi-Fi access point when you are within

range

3. Enter the Security Key or Pre Shared Key and click OK, Connect, or Next to

connect

Andere Handbücher für BiPAC 7800(N)X(L)

Inhaltsverzeichnis

Andere Billion WLAN-Router Handbücher

Billion

Billion BIPAC 6500 Bedienungsanleitung

Billion

Billion BiPAC 6404VGP Bedienungsanleitung

Billion

Billion 7800DX Betriebsanleitung

Billion

Billion BIPAC 7100G Bedienungsanleitung

Billion

Billion BiPAC 6300NX Installations- und Betriebshandbuch

Billion

Billion BiPAC 7300W Bedienungsanleitung

Billion

Billion SG600R2 Bedienungsanleitung

Billion

Billion BIPAC-840 Betriebsanleitung

Billion

Billion BiPAC 7300GX Bedienungsanleitung

Billion

Billion BiPAC 8500 Bedienungsanleitung

Billion

Billion BiPAC 7300GX Bedienungsanleitung

Billion

Billion 400G Bedienungsanleitung

Billion

Billion BiPAC 6404VGP Bedienungsanleitung

Billion

Billion BiPAC 8800AXL Bedienungsanleitung

Billion

Billion BiPAC 7800NX Betriebsanleitung

Billion

Billion BiPAC 7800VDOX Konfigurationshandbuch

Billion

Billion BiPAC 8900AX(L)-2400 Bedienungsanleitung

Billion

Billion BIPAC-5100 Bedienungsanleitung

Billion

Billion BiPAC 8800NL R2 Einrichtungshandbuch

Billion

Billion BiPAC 7404VGO Bedienungsanleitung

Billion

Billion BiPAC 5200N RC Bedienungsanleitung

Billion

Billion BiPAC 7500G Bedienungsanleitung

Billion

Billion BiPAC 7800DXL Bedienungsanleitung

Billion

Billion BIPAC-6500 Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Milesight

Milesight UG67 Bedienungsanleitung

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

NETGEAR

NETGEAR WNR2000v4 Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung