Billy Goat F042508A Bedienungsanleitung

Part No 891058 Form No F042508A

KVSP/TKVSP Owner’s Manual

BILLY GOAT KV VACUUM

Owner's Manual

KV600SP, KV650SPH, TKV650SPH

Accessories

ON BOARD

VACUUM

HOSE KIT

4"(102mm) x

7' (2.13m)

For

vacuuming in

hard to reach

areas.

P/N 891125

FELT DEBRIS

BAG

For use in

leaves and

grass in dusty

conditions.

P/N 89112

NOZZLE WEAR

GUARD KIT

For use in

increasing the

life of your

nozzle by

protecting it from

damage

P/N 891127

CASTER KIT

To allow for easy

rolling and

maneuverability

on smooth

surfaces.

P/N 89112

SHREDDER KIT

Shreds leaves,

reducing total

volume.

P/N 890209

KV LINER KIT

Increases the life

of the housing by

protecting it from

damage.

P/N 89113

Part No 891058 Form No F042508A

KVSP/TKVSP Owner’s Manual

ABOUT THIS MANUAL

THANK YOU for purchasing a BILLY GOAT ®KV Vacuum. Your new machine has been carefully designed and

manufactured to provide years of reliable and productive service. This manual provides complete operating and

maintenance instructions that will help to maintain your machine in top running order. Read this manual carefully

before assembling, operating, or servicing your equipment.

CONTENTS

SERIAL PLATE DATA AND SPECIFICATIONS 3

GENERAL SAFETY 4-5

SOUND AND VIBRATION 6

INSTRUCTIONLABELS 7

PACKING CHECKLIST & ASSEMBLY 8

OPERATION 9-10

MAINTENANCE 11

TROUBLESHOOTING AND WARRANTY PROCEDURE 12

MAINTENANCE RECORD 13

ILLUSTRATED PARTS & PARTS LISTS 14-15

Part No 891058 Form No F042508A

KVSP/TKVSP Owner’s Manual

SERIAL PLATE DATA

Record the model number, serial number, date of

purchase, and where purchased.

Purchase Date:

Purchased From:

Specifications

KV600SP KV650SPH TKV650SPH

Engine: HP 6.0 (4.47kW) 6.5 (4.85kW) 6.5 (4.85 kW)

Engine: Type B&S Quantum HONDA HONDA

Engine: Model 112K020124E1 GSV190AN1L GSV190AN1L

Engine: Fuel Capacity 1.5 qt. (1.4 L) 1.6 qt. (1.5 L) 1.6 qt. (1.5 L)

Engine: Oil Capacity 0.63 qt. (0.6 L) 0.58 qt (0.54L) 0.58 qt (0.54L)

Total Unit Weight: #129 (58.5 kg) #132 (58.9 kg) 141# (64 kg)

Overall Length 59” (1.5m) 59” (1.5m) 59” (1.5 m)

Overall Width 25.5” (.6 m) 25.5” (.6 m) 25.5” (.6 m)

Overall Height 42.75” (1.1m) 42.75” (1.1m) 42.75” (1.1 m)

Max. operating slope 200200200

Sound in accordance with

2000/14/EEC standards

109 dBa 109 dBa 112 dBa

Sound at operator’s ear 88 dBa 89 dBa 91 dBa

Vibration at operator position 0.71 g (6.96m/s2) 0.32 g (3.16m/s2) 0.43 g (4.25m/s2)

Part No 891058 Form No F042508A

KVSP/TKVSP Owner’s Manual

GENERAL SAFETY INSTRUCTIONS and SYMBOLS

The safety symbols shown below are used throughout this manual. You should become familiar with them before

assembling, operating, or servicing this equipment.

This symbol indicates important information that will prevent injury to yourself or others.

This symbol indicates ear protection is recommended when operating this equipment.

This symbol indicates eye protection is recommended when operating this equipment.

This symbol indicates gloves should be worn when servicing this equipment.

This symbol indicates that this manual and the engine manufacturer’s manual should be read

carefully before assembling, operation, or servicing this equipment.

This symbol indicates important information that will prevent damage to your BILLY GOAT ®

KV Vacuum.

This symbol indicates the engine oil level should be checked before operating this

equipment.

Read and make sure you thoroughly understand the following safety precautions before assembling, operating or

servicing this equipment:

READ this manual and the engine manufacturer’s manual carefully before assembling,

operating, or servicing this equipment.

EAR PROTECTION is recommended when operating this equipment.

EYE PROTECTION is recommended when operating this equipment.

BREATHING PROTECTION is recommended when operating this equipment.

EXHAUST from this product contains chemicals known to the State of California to cause

cancer, birth defects or other reproductive harm.

DO NOT operate this equipment on any unimproved forested, brushy, or grass covered land

unless a spark arrester is installed on the muffler as required by Section 4442 of the

California Public Resources Code. The arrester must be maintained in good working order.

Other states may have similar laws. Federal laws apply on federal lands.

DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an

odorless and possibly fatal poison.

Part No 891058 Form No F042508A

KVSP/TKVSP Owner’s Manual

DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is

recommended.

DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least

two minutes before refueling.

DO NOT store gasoline near an open flame.

DO NOT remove gas cap while engine is running.

DO NOT start or operate engine if strong odor of gasoline is present.

DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until

gasoline has completely evaporated.

DO NOT smoke while filling the fuel tank.

DO NOT check for spark with spark plug or spark plug wire removed. Use an approved spark

tester.

DO NOT operate engine without a muffler. Inspect muffler periodically and replace if

necessary. If equipped with muffler deflector, inspect deflector periodically and replace if

necessary.

DO NOT operate engine with grass, leaves or other combustible material near the muffler.

DO NOT touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may

cause severe burns.

DO NOT leave equipment unattended while in operation.

DO NOT park equipment on a steep grade or slope.

DO NOT operate equipment with bystanders in or near the work area.

DO NOT allow children to operate this equipment.

DO NOT operate equipment with guards removed.

DO NOT operate equipment near hot or burning debris or any toxic or explosive materials.

DO NOT operate equipment on slopes greater than specified in Specifications section of this

manual.

DO NOT place hands or feet underneath unit, or near any moving parts.

ALWAYS remove spark plug wire when servicing equipment to prevent accidental starting.

ALWAYS check fuel lines and fittings frequently for cracks or leaks. Replace if necessary.

ALWAYS keep hands and feet away from moving or rotating parts.

ALWAYS store fuel in approved safety containers.

WARNING: Important

Remove all rocks, wire, string, plastic, etc. that can present a hazard during work prior to

starting.

DO identify and mark all fixed objects to be avoided during work such as sprinkler heads,

water valves, buried cables, or clothes line anchors, etc.

Part No 891058 Form No F042508A

KVSP/TKVSP Owner’s Manual

SOUND

SOUND LEVEL 92 dB(a) at Operator Position

Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 7-25-07 under the

conditions listed below.

Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on

the unit for the sound power level for your model.

VIBRATION DATA

VIBRATION LEVEL 0.34g (3.29m/s2)

Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using

calibrated vibration test equipment. Tests were performed on 12-19-2007 under the conditions listed below.

INTENDED USE

INTENDED USE: This machine is designed for vacuuming leaves, grass clippings and other types of organic litter.

Debris mixed with cans, bottles and small amounts of sand can be vacuumed; however, it is not this machine's

primary purpose. Vacuuming cans, bottles and sand will affect the longevity of your machine.

Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check

for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign objects.

Note: See parts list for proper impeller bolt torque specifications. (See trouble shooting section on page 12).

General Conditions: Sunny

Temperature: 88oF (31.1oC)

Wind Speed: 2 mph (3.8 kmh)

Wind Direction: South South East

Humidity: 44%

Barometric Pressure: 30.07”Hg (764 mm Hg)

General Conditions: Sunny

Temperature: 50oF (10oC)

Wind Speed: 4 mph (6.4kph)

Wind Direction: South Southeast

Humidity: 68%

Barometric Pressure: 30 Hg (101.6kpa)

Part No 891058 Form No F042508A

KVSP/TKVSP Owner’s Manual

INSTRUCTION LABELS

The labels shown below were installed on your BILLY GOAT ®KV Vacuum. If any labels are damaged or missing, replace them before operating

this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The

correct position for each label may be determined by referring to the Figure and Item numbers shown.

LABEL DANGER KEEP HANDS LABEL EAR EYE BREATHING ITEM #20 DANGER FLYING DEBRIS

AND FEET AWAY P/N 890254 ITEM # 19 P/N 810736

ITEM #18 P/N 400424

LABEL READ MANUAL LABEL EXPLOSIVE FUEL CHIPPER WARNING LABEL LABEL DANGER GUARD

ITEM #17 P/N 890301 ITEM # 16 P/N 400268 ITEM #82 P/N 890152 (TKV ONLY) ITEM #39 P/N 900327

BAG FOLDING INSTRUCTIONS

LOCATED ON BAG

ENGINE LABELS

ENGINE and Transmission CONTROLS

HONDA BRIGGS & STRATTON

Read Owner’s Manual Before Operating.

Lire le manuel d’utilisation avant la mise en route.

Vor Inbetriebnahme Bedienungs - und Wartungsanleitung lesen.

Favor leer las instrucciones de operacion antes de operar el motor.

Consultare il Manuale Uso e Manutenzione prima dell utilizzo.

Las Skotselinstruktionen Innan Start.

Honda Throttle Control Briggs Throttle Control Bail Drive Engage/Disengage label

Part No 891058 Form No F042508A

KVSP/TKVSP Owner’s Manual

PACKING CHECKLIST

Your Billy Goat KV Vacuum is shipped from the factory in one carton, completely assembled except for the

upper handle, debris bag, and bag quick disconnect.

PUT OIL IN ENGINE BEFORE STARTING

ASSEMBLY

READ all safety instructions before assembling unit.

TAKE CAUTION when removing the unit from the box the Handle Assembly is attached by

cables and folded over

1. ASSEMBLE Lift upper handle (item 11), remove items 49, 50, & 51 from lower handle (item 10). Attach and

secure upper handle as shown using same hardware.

2. UNFOLD the debris bag (item 21) and fasten bag neck to bag quick disconnect (item 12). Attach firmly to

housing exhaust (item 1) see fig. 2.

3. ATTACH bag to four posts (item 13), preassembled to upper handle.

4. CONNECT spark plug wire.

Boxing Parts

Checklist

Debris Bag

P/N-891132

Literature Assy

P/N-891121

Connector Quick

Disconnect

P/N-890176

Honda 6.5

GSV 190

Briggs & Stratton

6.0 HP Quantum

PARTS BAG &

LITERATURE ASSY

Warranty card P/N- 400972, Owner’s Manual P/N-891058, Declaration of Conformity P/N-891057.

Quick disconnect

Fig. 2

Part No 891058 Form No F042508A

KVSP/TKVSP Owner’s Manual

OPERATION

STORAGE

Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach

an open flame, spark or pilot light, as on a furnace, water heater, clothes dryer or other gas appliance.

If engine is to be unused for 30 days or more, prepare as follows:

Remove all gasoline from carburetor and fuel tank to prevent gum deposits from forming on these parts and

causing possible malfunction of engine. Drain fuel outdoors, into an approved container, away from open flame. Be

sure engine is cool. Do not smoke. Run engine until fuel tank is empty and engine runs out of gasoline.

Like all mechanical tools, reasonable care must be used when operating machine.

Inspect machine work area and machine before operating. Make sure that all operators of this

equipment are trained in general machine use and safety.

PUT OIL IN ENGINE BEFORE STARTING

STARTING

ENGINE:See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine

must be level when checking and filling oil and gasoline.

ENGINE SPEED:Controlled by throttle lever on the engine. Under normal conditions, operate at minimum

throttle to accomplish your current cleaning task.

FUEL VALVE: Move fuel valve to "ON" position (when provided on engine).

CHOKE:Briggs-Located on engine and must be controlled manually.

Honda-Place remote throttle in choke position

PRIMER: Push primer per engine instructions (B&S only).

THROTTLE: Move throttle to fast/choke position. Located on handle.

TRANSMISSION: Engaged by pulling the clutch bail towards handle.

IF YOUR UNIT FAILS TO START:

See Troubleshooting on page 12.

HANDLING & TRANSPORTING:

This unit requires two people to lift it. Lift holding the lower handle and front wheels. Secure the

machine in place during transport. See page 3 for weight specifications

Never lift the machine while the engine is running.

Part No 891058 Form No F042508A

KVSP/TKVSP Owner’s Manual

OPERATION

VACUUMING OPERATION

VACUUM NOZZLE HEIGHT ADJUSTMENT:is raised and lowered by pushing slightly downward on handle

to reduce tension on the adjuster, and then pulling height adjust trigger on the handle (item 23) up at right rear of

machine. Then select the desired height that fits the task.

FOR MAXIMUM PICKUP: Adjust nozzle close to debris, but without blocking airflow into the nozzle. NOTE:

Never bury nozzle into debris.

CLEARING A CLOGGED NOZZLE & EXHAUST:Turn engine off and wait for impeller to stop completely

and disconnect spark plug wire. Wearing durable gloves, remove clog. Danger, the clog may contain sharp

materials. Reconnect spark plug wire.

DEBRIS BAG

Debris bags are normal replaceable wear items.

Note: Frequently empty debris to prevent bag overloading with more weight than you can lift.

An optional felt bag is available for use where debris will be vacuumed in dusty conditions (see Optional Accessories

shown on page 1).

DO NOT place bag on or near hot surface, such as engine. Be sure engine has come to a complete stop before removing or

emptying bag.

This vacuum is designed for picking up trash, organic material and other similar debris (see Safety Warnings

page 4-5).

However, many vacuums are used where dust is mixed with trash. Your unit can intermittently vacuum in dusty areas.

Dust is the greatest cause of lost vacuum performance. However, following these rules will help maintain your

machine's ability to vacuum in dusty conditions:

• Run machine at idle to quarter throttle.

• The debris bag must be cleaned more frequently. A vacuum with a clean, pillow soft bag will have good pickup

performance. One with a dirty, tight bag will have poor pickup performance. If dirty, empty debris and vigorously shake

bag free of dust.

• Pressure-wash debris bag if normal cleaning does not fully clean bag. Bag should be thoroughly dry before use.

NOTE: Having one or more spare debris bags is a good way to reduce down time while dirty bags are being cleaned.

DO NOT leave debris in bag while in storage.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Billy Goat Rasen- und Gartengeräte Handbücher

Billy Goat

Billy Goat MV650SPHEU Bedienungsanleitung

Billy Goat

Billy Goat BG60AH Montageanleitung

Billy Goat

Billy Goat SV50 Montageanleitung

Billy Goat

Billy Goat MV600SPE Bedienungsanleitung

Billy Goat

Billy Goat AE402 Bedienungsanleitung

Billy Goat

Billy Goat QL2000VE Montageanleitung

Billy Goat

Billy Goat SC121H Kurzanleitung

Billy Goat

Billy Goat OS900SPS Bedienungsanleitung

Billy Goat

Billy Goat SC181HEU Bedienungsanleitung

Billy Goat

Billy Goat KVSP Bedienungsanleitung

Billy Goat

Billy Goat AE1300HEU Bedienungsanleitung

Billy Goat

Billy Goat F1002SPV Bedienungsanleitung

Billy Goat

Billy Goat HYDRO-DRIVE BC26 Bedienungsanleitung

Billy Goat

Billy Goat SC18OH Bedienungsanleitung

Billy Goat

Billy Goat HTR1803VEU Montageanleitung

Billy Goat

Billy Goat OS901SPS Bedienungsanleitung

Billy Goat

Billy Goat PL2500SPH Bedienungsanleitung

Billy Goat

Billy Goat SC180HEU Bedienungsanleitung

Billy Goat

Billy Goat CR550HC Montageanleitung

Billy Goat

Billy Goat AE403V Bedienungsanleitung

Billy Goat

Billy Goat PL1801 Bedienungsanleitung

Billy Goat

Billy Goat MV650H PUSH Bedienungsanleitung

Billy Goat

Billy Goat F012507A Bedienungsanleitung

Billy Goat

Billy Goat GZ401H Montageanleitung

Beliebte Rasen- und Gartengeräte Handbücher anderer Marken

Vertex

Vertex 1/3 HP Technische Daten

GHE

GHE AeroFlo 80 Bedienungsanleitung

Millcreek

Millcreek 406 Bedienungsanleitung

Land Pride

Land Pride Post Hole Diggers HD25 Bedienungsanleitung

Yazoo/Kees

Yazoo/Kees Z9 Commercial Collection System Z9A Programmierhandbuch

Premier designs

Premier designs WindGarden 26829 Bedienungsanleitung

Snapper

Snapper 1691351 Bedienungsanleitung

Mosquito Magnet

Mosquito Magnet Patriot Bedienungsanleitung

Perfect

Perfect BG2 Bedienungsanleitung

P.Lindberg

P.Lindberg LS2 Bedienungsanleitung

Gardena

Gardena Easy 1887 Bedienungsanleitung

Makita

Makita UM104D Bedienungsanleitung

AQUA FLOW

AQUA FLOW PNRAD Bedienungsanleitung

Tru-Turf

Tru-Turf RB48-11A Golf Green Roller Benutzerhandbuch

BIOGROD

BIOGROD 730710 Bedienungsanleitung

Land Pride

Land Pride RCF2784 Bedienungsanleitung

Makita

Makita UM110D Bedienungsanleitung

BOERBOEL

BOERBOEL Standard Floating Bar Gravity Latch Bedienungsanleitung