Billy Goat MV650H PUSH Bedienungsanleitung

Part No 840244 1 Form No F072111B

MV650H PUSH Vacuum Owner’s Manual

BILLY GOAT ®MV650H PUSH Vacuum

Owner’s Manual

Accessories

Caster Kit Hose Kit Bag Liner Kit Felt Bag Kit

Use on hard surface

for maneuverability.

For vacuuming hard

to reach areas. To collect leaves,

thatch, and grass. Use on all dusty

conditions.

P/N 840129 P/N 840116 P/N 840134 P/N 840194

Part No 840244 2 Form No F072111B

MV650H PUSH Vacuum Owner’s Manual

CONTENTS

Specifications and Sound/Vibration .................................................................................................................. 3

Instruction Labels .............................................................................................................................................. 4

Assembly Instructions ....................................................................................................................................... 5-8

Operation ...........................................................................................................................................................9-12

Maintenance and Troubleshooting.....................................................................................................................13-14

Illustrated Parts List ........................................................................................................................................... 15-21

Go to http://www.billygoat.com for French-Canadian translations of the product manuals.

Visitez http://www.billygoat.com pour la version canadienne-française des manuels de produits

Form No F072111B 3 Part No 840244

MV650H PUSH Vacuum Owner’s Manual

MV 650 SERIES SPECIFICATIONS

MV650

Engine Type Honda GSV190AA1A

Horsepower 6.5 (4.85 kW)

Fuel Capacity 1.6 qt (1.5 L)

Oil Capacity 0.69 qt (0.65L)

Engine Weight 28 lbs (12.7 kg)

Unit Weight 157 lbs (71.2 kg)

Shipping Weight 180 lbs (81.7 kg)

Overall Dimensions 28” Wide x 62.5” Long x 45.5” High

Maximum Operating Slope 20°

In accordance with 2000/14/EEC

standards 103 dB(a) at 3320 rpm

Sound at Operators ear 83 dB(a) at 3320 rpm

SOUND DATA

SOUND LEVEL 103 Dba at Operator Position

Sound tests were conducted in accordance with 2000/14/EC, as well as ISO 11094, and were performed on 5-

17-2005 under the conditions listed below.

Sound power level listed is the highest value for any model covered in this manual. Please refer to

serial plate on the unit for the sound power level for your model.

General Conditions: Sunny

Temperature: 66.2oF (19oC)

Wind Speed: 8.5 mph (13.7kph)

Wind Direction: South Southwest

Humidity: 59%

Barometric Pressure: 29.9” Hg (101.35kPa)

VIBRATION DATA

VIBRATION LEVEL 1.43g(14.00m/s2)

Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using

calibrated vibration test equipment. Tests were performed on 5-24-2006 under the conditions listed below.

General Conditions: Sunny

Temperature: 73.7oF (23.2oC)

Wind Speed: 8.05 mph (3.6m/s)

Wind Direction: South

Humidity: 83.5%

Barometric Pressure: 29.91” Hg (101.31 kPa)

Part No 840244 4 Form No F072111B

MV650H PUSH Vacuum Owner’s Manual

INSTRUCTION LABELS

The labels shown below were installed on your BILLY GOAT ®MV Vacuum. If any labels are damaged or

missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part

numbers are provided for convenience in ordering replacement labels. The correct position for each label may

be determined by referring to the Figure and Item numbers shown.

PN 400268

(See Figure 3 Item 55) PN 890254

(See Figure 4 Item 162) PN 840054

(See Figure 1 Item 34)

PN 400424

(See Figure 1 Item 11) PN 810736

(See Figure 4 Item 174) PN 890301

(See Figure 4 Item 163)

PN 840080

(See Figure 4 Item 175)

ENGINE LABELS CONTROLS

PN 840045

(See Figure 3 Item 57)

Form No F072111B 5 Part No 840244

MV650H PUSH Vacuum Owner’s Manual

MV Vacuum Assembly Drawing

Part No 840244 6 Form No F072111B

MV650H PUSH Vacuum Owner’s Manual

PARTS LIST

Form No F072111B 7 Part No 840244

MV650H PUSH Vacuum Owner’s Manual

ASSEMBLY INSTRUCTIONS

Your BILLY GOAT ®MV Vacuum was shipped in one carton, completely assembled except for the Hood/Upper

Handle Assembly. Mounting hardware for the Hood/Upper Handle Assembly is temporarily installed on the lower

handle and the Housing assembly.

READ all safety instructions before assembling unit.

TAKE CAUTION when removing the unit from the box the Hood/Upper Handle Assembly is

attached to the unit by cables.

Remove unit from carton. Make sure the following items that have been packed with unit:

Parts bag P/N 840190

Owner’s Manual, P/N 840244

General Safety and Warnings Manual, P/N 100294

Declaration of Conformity, P/N 840204

Honda Engine Manual

Warranty Card, P/N 400972

Ty-Wraps (2 ea)

Hardware Bag P/N 840190

DISCONNECT spark plug wire before assembling unit.

1. Attach hood assembly to the housing then hold in

place during the step 2.

NOTE: BE SURE ALL CABLES ARE ROUTED ON

THE UNDERSIDE OF THE HOOD AND HOUSING.

2. Install item #170 center bolt first when aligned with a nut

on the housing.

3. Attach rest of hood assembly to the housing using

corresponding hardware.

NOTE: You will have to insert the bolt/washer from the

inside by reaching through the hood.

- Two 7/16” wrenches.

1st

Part No 840244 8 Form No F072111B

MV650H PUSH Vacuum Owner’s Manual

4. Attach upper handle brace to lower handle using

corresponding hardware. Then repeat this step on the

other side.

- Two 1/2” wrenches.

5. Attach rod end (164) to the nozzle door rod then

secure in place by tightening jam nut.

6. Attach nozzle door rod to the nozzle door using

corresponding hardware.

NOTE: It is easier to do this with nozzle door closed.

- Two 9/16” wrenches.

7. Attach rod end to rod (as in step 5).

8. Attach nozzle door rod to the lever with

nozzle door closed and lever in hose kit

position.

NOTE: Check to see nozzle door open and

close all the way (see page 15). Tighten or

loosen the rod end (164) for any

adjustments.

Two 9/16”

wrenches.

9. Install cable ty wraps.

10. Reconnect spark plug wire.

11. Attach the bag.

HERE

Form No F072111B 9 Part No 840244

MV650H PUSH Vacuum Owner’s Manual

OPERATION

OPERATOR CONTROLS

The operator’s position is at the rear of the machine between the handlebars. The operator should STAND in a position to

allow both handlebars to be grasped firmly, which allows sufficient leverage to steer the machine. Operator’s controls are

shown below.

Operator Control Locations

1 Nozzle Door Adjuster 4 Throttle Control

2 Bag Latch

3 Pull Starter

STARTING

CHECK engine oil level before operating machine.

1. Place equipment on a level, firm surface that is free of rocks or other debris.

2. Place throttle in CHOKE position.

Throttle

DO NOT START equipment without the debris bag in place.

Part No 840244 10 Form No F072111B

MV650H PUSH Vacuum Owner’s Manual

3. Secure the unit with left hand at the handle then pull starter rope with right hand to start engine.

PULL STARTER CORD slowly until resistance is felt. Then pull cord rapidly to avoid kickback.

4. Move throttle control back to RUN position and allow engine to reach correct operating speed.

VACUUM NOZZLE HEIGHT ADJUSTMENT

FOR MAXIMUM PICKUP: Adjust nozzle height as close to debris as possible, but without blocking airflow into the nozzle.

NOTE: Never bury nozzle into debris. The vacuum nozzle is raised and lowered by turning the crank handle clockwise and

counter-clockwise.

SECURE UNIT AT

THE HANDLE

WITH LEFT HAND

DURING START

PULL ROPE

STARTER WITH

RIGHT HAND

Andere Handbücher für MV650H PUSH

Inhaltsverzeichnis

Andere Billy Goat Rasen- und Gartengeräte Handbücher

Billy Goat

Billy Goat AE402 Bedienungsanleitung

Billy Goat

Billy Goat Quiet Vac SV50HR Montageanleitung

Billy Goat

Billy Goat KD505SPQ Montageanleitung

Billy Goat

Billy Goat HTR1601V Montageanleitung

Billy Goat

Billy Goat Grazor GZ400H Bedienungsanleitung

Billy Goat

Billy Goat AE1300HEU Bedienungsanleitung

Billy Goat

Billy Goat SC120H Kurzanleitung

Billy Goat

Billy Goat CR550HC Montageanleitung

Billy Goat

Billy Goat KD502SPQ Montageanleitung

Billy Goat

Billy Goat QV550HSP Bedienungsanleitung

Billy Goat

Billy Goat QV PUSH Bedienungsanleitung

Billy Goat

Billy Goat SC181H Bedienungsanleitung

Billy Goat

Billy Goat LB351 Bedienungsanleitung

Billy Goat

Billy Goat SC18OH Bedienungsanleitung

Billy Goat

Billy Goat SV50 Montageanleitung

Billy Goat

Billy Goat F012507A Bedienungsanleitung

Billy Goat

Billy Goat Quiet Vac SV50HR Montageanleitung

Billy Goat

Billy Goat F1002SPV Bedienungsanleitung

Billy Goat

Billy Goat MV601SPE Bedienungsanleitung

Billy Goat

Billy Goat SC180HEU Bedienungsanleitung

Billy Goat

Billy Goat PR550 Montageanleitung

Billy Goat

Billy Goat OS900SPS Bedienungsanleitung

Billy Goat

Billy Goat F042508A Bedienungsanleitung

Billy Goat

Billy Goat CR551V Bedienungsanleitung

Beliebte Rasen- und Gartengeräte Handbücher anderer Marken

Vertex

Vertex 1/3 HP Technische Daten

GHE

GHE AeroFlo 80 Bedienungsanleitung

Millcreek

Millcreek 406 Bedienungsanleitung

Land Pride

Land Pride Post Hole Diggers HD25 Bedienungsanleitung

Yazoo/Kees

Yazoo/Kees Z9 Commercial Collection System Z9A Programmierhandbuch

Premier designs

Premier designs WindGarden 26829 Bedienungsanleitung

Snapper

Snapper 1691351 Bedienungsanleitung

Mosquito Magnet

Mosquito Magnet Patriot Bedienungsanleitung

Perfect

Perfect BG2 Bedienungsanleitung

P.Lindberg

P.Lindberg LS2 Bedienungsanleitung

Gardena

Gardena Easy 1887 Bedienungsanleitung

Makita

Makita UM104D Bedienungsanleitung

AQUA FLOW

AQUA FLOW PNRAD Bedienungsanleitung

Tru-Turf

Tru-Turf RB48-11A Golf Green Roller Benutzerhandbuch

BIOGROD

BIOGROD 730710 Bedienungsanleitung

Land Pride

Land Pride RCF2784 Bedienungsanleitung

Makita

Makita UM110D Bedienungsanleitung

BOERBOEL

BOERBOEL Standard Floating Bar Gravity Latch Bedienungsanleitung