Binary B-200-1CAT-HDIR Bedienungsanleitung

B-200-1CAT-HDIR

OWNER’S MANUAL

Binary™ Single Cat 5e/6 HDMI 1.4

3DExtender Plus IR Receiver & Flasher

Pass-Through (130 Ft.)

WELCOME TO THE BINARY™ BRAND OF PRODUCTS

This product is engineered to provide years of exceptional reliability. Binary™

is one of the most highly regarded brands available today. We appreciate your

business and we stand committed to providing our customers with the highest

degree of quality and service in the industry.

IMPORTANT SAFETY INSTRUCTIONS

1. Read and follow all instructions and warnings in this manual.

Keep for future reference.

2. Do not install near any heat sources such as radiators, heat registers, stoves

or other apparatus (including ampliers).

3. Do not install the unit near water or where moisture is present.

4. Clean with a dry cloth.

5. Unplug this apparatus during lightning storms or when unused for long

periods of time.

6. Protect the power cord from being walked on or pinched particularly at plug,

convenience receptacles, and the point where it exits from the apparatus.

7. Refer all servicing to qualied service personnel. Servicing is required when the

apparatus has been damaged in any way, such as when the power-supply cord

or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

8. To completely disconnect this equipment from the AC mains, disconnect

the power supply cord plug from the AC receptacle.

CAUTION: To reduce the risk of electrical shock, inspect the premises carefully.

Do not use the unit if proper equipment grounding cannot be veried.

PACKAGE CONTENTS

• (1) B-200-1CAT-HDIR (Transmitter and Receiver)

• (4) Mounting Screws

• (8) Rubber Feet

• (2) 5V power supply units

• (1) User manual

• (1) IR Adapter Cable

INTRODUCTION

The B-200-1CAT-HDIR extends HDMI over single Cat5e/6 allowing video and audio

transmission. In addition, the B-200-1CAT-HDIR is equipped with bi-directional IR

pass-through allowing users to boost IR control distance up to 200 ft. making

IR control possible with no additional wires. The B-200-1CAT-HDIR also supports

the most advanced 3D video format, which is compliant with HDMI 1.4 3D

specications, and guarantees the highest 3D video compatibility on the market.

FEATURES

• HDMI 1.4 3D

• Extend the transmission up to 200 ft. from the HDMI source at

HD 1080i or 720p 24-Bit

• Extend the transmission up to 130 ft. from the HDMI source at

Full HD 1080p 24-Bit

• Extend the transmission up to 65 ft. from the HDMI source at

Full HD 1080p 36-Bit

• HDCP 1.1 compliant

• Maximize adjustable 8-level equalization control

• Uncompressed 7.1 channel digital HDMI over Cat5e/6

cable transmission

• DTS-HD Master and Dolby TrueHD audio support

• Supports full frequency IR signal from 20kHz to 60kHz

• Bi-directional IR pass-through

• Wall-mountable housing design for easy installation

Note: The transmission distance is subject to the quality of installed

cable(s), source device, and display. Any keystone jack or other

connections along the transmission path will reduce the transmission

performance signicantly. To minimize the chance of EMI,

STP (Shielded Twisted Pair) cable is recommended.

1. MODE:

2. HDMI IN: Connects to a HDMI source with a HDMI male-to-male cable

(1 meter or shorter HDMI cable is recommended)

3. IR Receiver: Infrared 3.5mm jack for IR receiver or IR adapter cable for connection

to a control system

4. IR Flasher: Infrared 3.5mm jack for IR asher

5. Screw-locking power jack: Connect to the provided 5V DC power supply

6. RJ45: Plug in a Cat5e/6 cable that needs to be linked to the transmitting unit

TRANSMITTER

NOTE: Transmission distance up to 200 feet at 1080i, 130 feet at 1080p (24-Bit),

and 65 feet at 1080p (36-Bit)

1 2 3 4 5 6

INPUT PANEL OUTPUT PANEL

EDID Setting Supported Resolutions Color Depth Audio Channels

0 1080p @60 24-Bit 7.1

1 1080p @60 24-Bit 2

2 1080p @60 36-Bit 7.1

3 1080p @60 24-Bit 3D 7.1

4 1080p @30, 1080i @60, 720p @60 24-Bit 7.1

5 1080p @30, 1080i @60, 720p @60 24-Bit 2

6 1080p @60 24-Bit 3D 2

7 Learning Mode — —

7. Screw-locking power jack: Connect to the provided 5V DC power supply

8. RJ45: Plug in a Cat5e/6 cable that needs to be linked to the transmitting unit

9. Rotary control: Adjust the 8-level equalization control to the received HDMI

signals. The HDMI signal level varies from 0 (strongest) to 7

(weakest) for respective transmission length from longest

possible range to short distance. Adjust the signal level

from 7 to 0 and stop turning the rotary switch whenever

the audio/video is playing normally. Inappropriate signal

level setting may cause an overpowering issue that would

shorten the product life signicantly.

10. HDMI OUT: Connect to an HDMI display with a HDMI male-to-male cable

(1 meter or shorter HDMI cable is recommended)

11. IR Receiver: Infrared 3.5mm jack for IR receiver

12. IR Flasher: Infrared 3.5mm jack for IR asher

EDID LEARNING

1. Connect the HDMI display to“HDMI IN” on the Transmitter with a HDMI cable.

2. Set “MODE” on the transmitting unit to “7”.

3. Power on the Transmitter by connecting the 5V Power Supply.

4. The LED on the RJ45 of the transmitter will ash On and O once to learn the EDID.

Keep the mode dial on “7” at all times to use the learned EDID.

5. Unplug the HDMI cable from the display and follow the installation instructions

below to install the B-200-1CAT-HDIR.

RECEIVER

7 98 10 11 12

INPUT PANEL OUTPUT PANEL

EDID Setting Supported Resolutions Color Depth Audio Channels

0 1080p @60 24-Bit 7.1

1 1080p @60 24-Bit 2

2 1080p @60 36-Bit 7.1

3 1080p @60 24-Bit 3D 7.1

4 1080p @30, 1080i @60, 720p @60 24-Bit 7.1

5 1080p @30, 1080i @60, 720p @60 24-Bit 2

6 1080p @60 24-Bit 3D 2

7 Learning Mode — —

IR PASS-THROUGH

IR signals can be passed from the transmitter to the receiver over the

Cat5e/6 cable. Each unit will need both an IR Receiver and an IR Flasher

(sold separately). This allows the units to receive IR information and transmit it.

CAUTION: Incorrect connection of the IR Flasher and Receiver may result in

IR extender failure. Check carefully before plugging in the IR extender to the

respective IR sockets. Warranty will not cover the damage.

SPECIFICATIONS

IR Flasher

(Episode®IRF-1

or Episode®IRF-2)

IR Receiver

(Episode®IR-SM-3660

or Episode®IR-TT-3660)

Mini Mono Cable

Binary™B3-MonoMini-.5,

B3-MonoMini-1, or B3-MonoMini-2

IR FLASHER

IR ADAPTER CABLE FOR CONTROL SYSTEMS (INCLUDED)

IR Signal (Tip)

(20-60 kHz)

IR Signal (Tip)

(20-60 kHz)

IR Signal (Tip)

Grounding

(Sleeve)

Grounding

(Ring)

Grounding

(Ring)

12V DC

(Sleeve)

IR RECEIVER

IR Signal (Tip)

(20-60 kHz)

Grounding

(Ring)

12V DC

(Sleeve)

NOTE: This product was specically engineered for Episode®IR products.

Use of the following products is highly recommended (items not included).

IR INTEGRATION WITH A CONTROL SYSTEM

The IR Receiver connection on the Transmitter is designed to operate with Episode®

IR products. When connecting the Transmitter to an IR Remote Control System or

Home Automation system to control the display from the control system, it is neces-

sary to convert the connection from a stereo 3.5mm (1/8”) cable to a mono 3.5mm

(1/8”) cable and eliminate 12VDC. Included in the box is an IR Adapter Cable to make

this connection very simple. First, connect the male end of the IR Adapter Cable to

the IR Receiver jack on the Transmitter. Next, connect a mono

3.5mm (1/8”) cable from the female end of the

IR Adapter Cable to the control system.

Test the connections.

INSTALLATION

1. Learn the EDID from the Display to the Transmitter (see EDID Learning section)

or select the appropriate mode (see transmitter section).

2. Connect a HDMI source (such as a Blu-ray Disc player) to the transmitting unit.

3. Connect a HDMI display (such as a LCD TV) to the receiving unit.

4. Connect IR Flashers/Receivers to both transmitting and receiving units. Use a

1 meter or shorter HDMI cable.

5. Connect a Cat5e/6 cable between the units, ensuring the cable is tightly

connected and not loose. WARNING- Do not make terminations to the CAT5e/6

while connected to the extender.

6. Plug in 5V DC power supply unit to the power jack of both the transmitting and

receiving unit.

7. If you see ickering or blinking images on the display, adjust the distance control

switch to improve the cable skew. Use “0” for the longest possible transmission

length, and “7” for a short transmission length. Adjust the signal level from“7” to “0”

and stop turning the rotary switch whenever the audio/video is playing normally.

Overpowering signal levels can signicantly shorten the life of the product.

Do NOT over-power the EQ signal strength when adjusting the EQ. Start from “7”

and turn dial slowly to “6” and on. Once the audio/video is working properly, do

not continue to turn the EQ dial.

Cat5e/6 Cable

12V+

Ground

Signal

CONTROL SYSTEM

SIGNAL IN

IR OUT

GROUND (SLEEVE)

SIGNAL (TIP)

NO CONNECTION

TRANSMITTERRECEIVER

IR FLASHER

(Episode® IRF-1 or Episode® IRF-2)

IR RECEIVER

(Episode® IR-SM-3660

or Episode® IR-TT-3660)

MINI MONO CABLE

Binary™ B3-MonoMini-.5,

B3-MonoMini-1, or

B3-MonoMini-2

SPECIFICATIONS

Technical Transmitter Receiver

HDMI Compliance HDMI 1.4 3D

HDCP Compliance Yes

Video Bandwidth Single-link 225MHz (6.75Gbps)

Video Support 480i / 480p / 720p / 1080i / 1080p60

HDMI over UTP Transmission (24-bit) Full HD (1080p)-130ft (CAT5e) / 165ft (CAT6)

HD (720p/1080i)- 165ft (CAT5e) / 200ft (CAT6)

Audio Support Surround sound (up to 7.1ch) or stereo digital audio

Signal Equalization 8-level digital control at RX

Input TMDS Signal 1.2 Volts (peak-to-peak)

Input DDC Signal 5 Volts (peak-to-peak, TTL)

ESD Protection

(1) Human body model — ±19kV (air-gap discharge) & ±12kV (contact discharge) (2)

Core chipset — ±8kV

PCB Stack-Up 4-layer board (impedance control — dierential 100Ω; single 50Ω)

IR Pass-Through Bi-directional

Input 1x HDMI, 1x 3.5mm 1x RJ45, 1x 3.5mm

Output 1x RJ45, 1x 3.5mm 1x HDMI, 1x 3.5mm

HDMI Source Control Controllable via IR pass-through from RX to TX with IR extenders

IR Remote Control Carrier frequency: 20-60kHz

HDMI Connector Type A (19-pin female)

RJ45 Connector WE/SS 8P8C with 2 LED indicators

3.5mm Connector IR transmitter IR receiver

Rotary Control Switch Mode Signal level

Mechanical

Housing Metal enclosure

Dimensions (L x W x H) Tx and Rx each 2.9” x 3.5” x 1”

Weight Tx and Rx each 1.1 lbs

Power Supply 5V DC 2A

Power Consumption 3 Watt (max)

Operation Temperature 32~104°F

Storage Temperature -4~140°F

Relative Humidity 20~90% RH (no condensation)

*Note: Specications are subject to change without notice. Dimensions and weight are approximate.

WARRANTY

2-Year Limited Warranty

This Binary™ Product has a Two-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to

be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been

abused, modied or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service

center with prior notication and an assigned return authorization number (RA).

For Technical Support: 1-866-838-5052 111228

Andere Handbücher für B-200-1CAT-HDIR

Inhaltsverzeichnis

Andere Binary Extender Handbücher

Binary

Binary B-240-HD-2AC Bedienungsanleitung

Binary

Binary B-660-EXT-444-40 Bedienungsanleitung

Binary

Binary B-520-TX-230-IR Bedienungsanleitung

Binary

Binary B760-EXT-444-300 Bedienungsanleitung

Binary

Binary Binary 360 Series Bedienungsanleitung

Binary

Binary HD-1CAT-1080P-130 Bedienungsanleitung

Binary

Binary B-300-HDMATRIX-RCVR Bedienungsanleitung

Binary

Binary B-540-EXT-230-RS Bedienungsanleitung

Binary

Binary B-300-USB1-CATX Bedienungsanleitung

Binary

Binary B-200-1CAT-HDIR Bedienungsanleitung

Binary

Binary B-300-USB2-CATX Bedienungsanleitung

Binary

Binary B-400-1COAX-HDIR Bedienungsanleitung

Binary

Binary B-320-HDMATRIX-RCV-W Bedienungsanleitung

Binary

Binary B-200-1CAT-VGA Bedienungsanleitung

Binary

Binary B-660-EXT-444-100A Bedienungsanleitung

Binary

Binary B-660-EXT-444-100AS Bedienungsanleitung

Binary

Binary B-320-1CAT-HDIR Bedienungsanleitung

Binary

Binary B-350-USB2-CATX Bedienungsanleitung

Binary

Binary HD-2CAT-1080P-130 Bedienungsanleitung

Binary

Binary B-320-1CAT-HDIR-W Bedienungsanleitung

Binary

Binary B-560-EXT-444-70 Bedienungsanleitung

Binary

Binary B-210-HDMATRIX-RECVR Bedienungsanleitung

Binary

Binary B-520-EXT-330-RS-IP Bedienungsanleitung

Binary

Binary B-500-EXT-330-RS-IP Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung