Binary B-300-HDMATRIX-RCVR Bedienungsanleitung

OWNER’S MANUAL

B-300-HDMATRIX-RCVR

BINARY SINGLE CAT 5E/6 HDMI 1.4

EXTENDER FOR USE WITH

B-300 HDMATRIX SERIES SWITCHERS

pg.2

B-300-HDMATRIX-RCVR Installation and Users Manual

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of re or electric shock, do not expose this apparatus in or near rain or moisture.

1. Read and follow all instructions and warnings in this manual. Keep for future reference.

2. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus

(including ampliers).

3. Do not install the unit near water or where moisture is present.

4. Clean with a dry cloth.

5. Unplug this apparatus during lightning storms or when unused for long periods of time.

6. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles,

and the point where it exits from the apparatus.

7. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been

damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

8. To completely disconnect this equipment from the AC mains, disconnect the power supply cord plug

from the AC receptacle.

OVERVIEW

The B-300-HDMATRIX-RCVR extends HDMI from a B-300-HDMATRIX series switcher over single Cat5e/6

130 feet at 1080P60 24Bit color,t including all HDMI 1.4a 3D formats.

PACKAGE CONTENTS

• (1) B-300-HDMATRIX-RCVR

• (1) +5V 4A DC power supply

• (1) User manual

• (1) IR Adapter

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRICAL SHOCK.

DO NOT REMOVE COVER. NO USER

SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning ash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of un-insulated dangerous voltage within the

product’s enclosure that may be of sucient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

pg.3

B-300-HDMATRIX-RCVR Installation and Users Manual

FEATURES

• Support for HDMI 1.4a 3D formats

• Extends the transmission up to 200 ft. from the HDMI source at HD 1080i or 720p 24-Bit

• Extends the transmission up to 130 ft. from the HDMI source at Full HD 1080p 24-Bit

• Extends the transmission up to 65 ft. from the HDMI source at Full HD 1080p 36-Bit

• HDCP 2.0 compliant

• DTS-HD Master and Dolby TrueHD audio support

• Bi-directional IR pass-through

• Supports full-frequency IR signal from 20kHz to 60kHz

See Important Connection Notes! for cautions regarding connection and operation.

CONNECTIONS

1. Latch-locking power jack: Connect to included 5V 4A DC power supply.

2. RJ45: Plug in a Cat5e/6 cable from B-300-HDMATRIX Output.

3. HDMI OUT: Connect to an HDMI display with a HDMI male-to-male cable.

4. IR Receiver: Infrared 3.5mm jack for IR receiver.

5. IR Flasher: Infrared 3.5mm jack for IR asher

3 4 51 2

pg.4

B-300-HDMATRIX-RCVR Installation and Users Manual

BASIC CONNECTIONS

CALIBRATION

1. Distance control: Adjust the 8-level equalization control to the received HDMI signals. The HDMI signal

level varies from 0 (strongest) to 7 (weakest) for respective transmission length from longest possible

range to short distance.

CAUTION: Inappropriate signal level setting may cause an overpowering issue that would shorten

the product life signicantly. Follow the steps below to adjust the distance setting in order to avoid

overdriving.

ADJUSTING FOR DISTANCE

1. Set the distance control to 7 (Weakest).

2. Select a source that is outputting the highest-quality video that will be transmitted over the extender.

If you see ickering or blinking images on the display:

Adjust the signal level from 7 to 0 one step at a time, and stop turning the rotary switch when the audio/

video is playing normally.

B-300-HDMATRIX-RCVR

B-300-HDMATRIX-4x4

HDTV

IR Receiver

Cat5e/Cat6 (Shielded Recommended)

HDMI cable (1m max length)

IMPORTANT CONNECTION NOTES!

• CAUTION: The IR Receiver 3.5mm jack provides 12V power for IR receivers that can damage ashers and

control systems. Check carefully before plugging an IR Flasher or IR Receiver into the respective IR sockets.

Manufacturer’s Warranty will not cover the damage. See IR Control Connections section for proper cabling.

• To reduce video dropout problems from ceiling fans and other EMI issues, it is strongly recommended

that shielded CAT5e/CAT6 and shielded RJ45 connectors are used with this extender product. “EZ-end”

connectors are not recommended for use with HDMI extenders.

• The transmission distance is subject to the grade of installed cable(s), source device, and display. Any

keystone jack along the transmission path will reduce the transmission performance signicantly

• 1 meter or shorter HDMI cable is recommended for connecting the B300-HDMATRIX-RCVR to the display.

pg.5

B-300-HDMATRIX-RCVR Installation and Users Manual

IR PASS-THROUGH

Bi-directional IR signals are also transmitted between the B-300-HDMATRIX-RCVR and the B-300-

HDMATRIX-4x4 or B-300-HDMATRIX-8x8 switchers over the Cat5e/6 cable. Each B-300-HDMATRIX-RCVR

will need an IR Receiver to send IR from the RCVR to the switch, and an IR asher to use IR sent from the

switch to the RCVR (sold separately).

NOTE: This product was specically engineered for Episode® IR products. Use of the following products is

highly recommended (not included):

IR CONTROL CONNECTIONS

CAUTION: Before connecting an IR Receiver or an IR control system, verify that the B-300-HDMATRIX-

RCVR is OFF to avoid damaging the unit.

Pin out congurations for IR receivers and control systems vary. Before connecting to this input, review

this section carefully in order to match the pin outs for the HDMatrix.

Before connecting an IR Receiver or to an IR control system, verify that the HDMatrix is OFF to ensure

proper operation when connected.

HDTV

IR Receiver

IR Flasher

(Episode® IRF-1

or Episode® IRF-2)

IR Receiver

(Episode® IR-SM-3660

or Episode® IR-TT-3660)

IR Signal

(Tip)

GND

(Ring) 12v DC

(Sleeve) IR Signal Tip

GND Ring

12v DC Sleeve

pg.6

B-300-HDMATRIX-RCVR Installation and Users Manual

CONNECTING A CONTROL SYSTEM OR IR CONNECTING BLOCK

When connecting a control system or connecting block to the IR Receiver jack, the 12V DC (Sleeve) must

not be connected. Connections of this type require the use of the included Stereo to Mono IR Adaptor or

a custom cable made. A mono 3.5mm cable should not be used as it will short out the 12 VDC to GND and

will make the connection inoperable.

Stereo to Mono IR Adaptor

Custom Cable Construction

INSTALLATION

1. Connect a HDMI source (such as a Blu-ray Disc player) to the B-300-HDMATRIX switcher.

2. Connect a HDMI display (such as a LCD TV) to the receiver.

3. Connect IR Flasher/Receiver as needed to the receiver-300-HDMATRIX-RCVR and he B-300-HDMATRIX

switcher.

4. Connect a Cat5e/6 cable between the units.

5. Connect the 5V 4A DC power supply unit to the power jack of the B-300-HDMATRIX-RCVR.

6. Adjust the Distance setting on the B-300-HDMATRIX-RCVR as described above in Distance Control.

IR Signal (Tip)

12V DC (Sleeve)

GND (Ring)

To B-300-HDMATRIX-RCVR

To IR Control System/

Connecting Block

IR Signal (Tip)

GND (Sleeve)

IR Signal

(Tip) (Tip)

12V DC

(Sleeve)

GND

(Ring)

(Sleeve)

IR Signal (Tip)

12V DC (Sleeve)

GND (Ring)

To B-300-HDMATRIX-RCVR

IR Signal (Tip)

GND (Sleeve)

To IR Control System/

Connecting Block

pg.7

B-300-HDMATRIX-RCVR Installation and Users Manual

SPECIFICATIONS

WARRANTY

Two-Year Limited Warranty

This Binary™product has a 2-year limited Warranty. This warranty includes parts and labor repairs on all

components found to be defective in material or workmanship under normal conditions of use. This warranty

shall not apply to products which have been abused, modied or disassembled. Products to be repaired under this

warranty must be returned to SnapAV or a designated service center with prior notication and an assigned return

authorization number (RA).

Technical

HDMI Compliance Full HD 1080P60, Deep Color

(36bit), 3D (1.4a)

HDCP Compliance Yes

Video Bandwidth Single-link 225MHz (6.75Gbps)

Video Support

1080p / 1080i / 720p

/480p / 480i up

to 36-bit color

HDMI over UTP Transmission

(24-bit)

Full HD (1080p)-130ft (CAT5e) /

165ft (CAT6)

HD (720p/1080i)- 165ft (CAT5e) /

200ft (CAT6)

Audio Support Surround sound (up to 7.1ch) or

stereo digital audio

Distance Control 8-level control

Signal Input 1x RJ45

HDMI Output 1x HDMI Type A

IR Pass-

Through

Type: Bi-directional

Carrier

frequency:

20-60kHz

IR Receiver 3.5mm Stereo (powered)

IR Flasher 3.5mm Mono (unpowered)

Mechanical

Housing Metal enclosure

Dimensions (L x W x H) 2.9” x 3.5” x 1”

Weight 1.1 lbs

Power Supply 5V 4A DC

Power Consumption 3 Watt (max)

Operation Temperature 32~104°F

Storage Temperature -4~140°F

Relative Humidity 20~90% RH (no condensation)

Certifications CE,FCC,RoHs

111215

Inhaltsverzeichnis

Andere Binary Extender Handbücher

Binary

Binary B-540-EXT-230-RS Bedienungsanleitung

Binary

Binary Binary 360 Series Bedienungsanleitung

Binary

Binary B-200-1CAT-HDIR Bedienungsanleitung

Binary

Binary B-660-EXT-444-40 Bedienungsanleitung

Binary

Binary B-220-1CAT-VGA-A Bedienungsanleitung

Binary

Binary B-400-1COAX-HDIR Bedienungsanleitung

Binary

Binary B-240-HD-2AC Bedienungsanleitung

Binary

Binary B-660-EXT-444-100AS Bedienungsanleitung

Binary

Binary B760-EXT-444-300 Bedienungsanleitung

Binary

Binary B-350-USB2-CATX Bedienungsanleitung

Binary

Binary B-660-EXT-444-100A Bedienungsanleitung

Binary

Binary B-560-EXT-444-70 Bedienungsanleitung

Binary

Binary 330 Series Bedienungsanleitung

Binary

Binary B-520-EXT-230-RS-W Bedienungsanleitung

Binary

Binary HD-2CAT-1080P-130 Bedienungsanleitung

Binary

Binary B-210-HDMATRIX-RECVR Bedienungsanleitung

Binary

Binary B-320-HDMATRIX-RCV-W Bedienungsanleitung

Binary

Binary B-520-TX-230-IR Bedienungsanleitung

Binary

Binary B-320-1CAT-HDIR Bedienungsanleitung

Binary

Binary B-320-1CAT-HDIR-W Bedienungsanleitung

Binary

Binary B-200-1CAT-HDIR Bedienungsanleitung

Binary

Binary B-200-1CAT-VGA Bedienungsanleitung

Binary

Binary B-500-EXT-330-RS-IP Bedienungsanleitung

Binary

Binary B-300-USB2-CATX Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung