Binatone Spirit 410 Bedienungsanleitung

Spirit 410 Corded Telephone

Unpackingyourphone

In the box you will find:

• Base Unit

• Handset

• Coiled Handset cord

• Telephone line cord

for Base unit

• User manual

Keep thepacking

materials ina safe

place in case you later

need to transport

Keep your sales (till)

receipt, which is your

guarantee.

Important note---backup batteries

The Spirit 410 requires 2 x1.5V AAAsizeAlkaline batteries installed

intothebatterycompartment beforeuse.

Warning: The caller display will not work without batteries installed.

the unit.

1. LCD Screen

2. One-Touch Memory buttons

3. Scroll Up & Down buttons

4. Delete button

5. Set/Store button

6. Memory button

7. LNR(Last Number Redial) button

8. Speakerphone button

9. Mute button

10.R(Recall) button

11.Pause button

1. Where to find it

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

1.Locating the Base unit

The Base unit should be placed on a level surface, in a position where:

the telephone line cable will reach your telephone line socket or

extension socket.

it is not close to a sink, bath or shower, or anywhere else where it

might get wet.

it is not close to other electrical equipment - fridges, washing

machines, microwave ovens, TVs, fluorescent lights, etc.

2. Plug the coiled handset

cord into the Handset.

Plug the other end into

the jack on the left

side of the Base unit.

3. Place the Handset in

the Base unit.

4.Plug the telephone line cord free end

into a modular wall jack.

Press the cable into the groove so that

the Base unit stands level.

5.Lift the Handset and check for Dial tone

in the earpiece.

Always use the

telephone line

cord supplied

with your

Spirit 410 phone.

Other telephone

line cords may

not work.

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

2. Installation

Make sure the plugs

click into place.

to Modular

Wall jack

H L

Installing (or Replacing) the Battery

IMPORTANT

- Before removing the battery compartment cover,always

make sure the base unit is disconnected from the telephone line.

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

Install 2 pcs of Alkaline AAA batteries into the battery compartment and

place back the cover before use.

Note: 1) Please do NOT use Rechargeable batteries in this phone.

SIZE AAA

SIZE AAASIZE AAA

,-8806: 27 458 24.39/0/ 810 9428

?GDL QGD A@QQDOT HP JMS<

CHPNJ@T PBODDL= > TMR CM LMQ ODNJ@BD QGD A@QQDOHDP< QGDT SHJJ ADBMKD

QMQ@JJT CHPBG@OFDC @LC TMRO CHPNJ@T PBODDL SHJJ LMQ SMOI=

will show up of the

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

3. Desk/Wall mount installation

To place the Spirit 410 on a desk, connect

the stand to the bottom of the phone in the

slots near the rear of the base as shown below.

Desk Mount

Insert the rigid clips of the stand into the slots

on the bottom of the phone (near the rear of

the base). Press down firmly until the flexible

clips clicks into place.

To remove the stand, (1) pinch the flexible

clips, (2) pull back the stand, and then (3)

slide up and forward (3) as shown below.

To place the Spirit 410 on a wall, connect

the stand to the bottom of the phone in the

slots near the front of the base cover as shown below.

Wall Mount

Desk/Wall mounting continue...

Insert the rigid clips of the stand into the slots

on the bottom of the phone (near the front of

the base). Press down firmly until the flexible

clips clicks into place.

To remove the stand, (1) pinch the flexible

clips, (2) pull back the stand, and then (3)

slide up and forward as shown below.

Mark two points on the wall that are 120 mm

apart to lay the fixing centers as shown below.

BE CAREFUL to check that there are no

electrical wires hidden in the wall.

Fix two screws (supplied with the unit) at the

marked locations, leaving approximately 7mm

between the wall and the the screw head.

Hang the cradle unit on the screws using the

wall mount slots. You may need to remove the

telephone from the wall and tighten the

screws so that the cradle is securely fixed and

does not wobble. Place the Handset on the

cradle with the parking hook on the cradle

arranged to fit in the parking recess under the

earpiece on the Handset.

Set Time/Date

1In standby mode, press SET/STO button.

ÖThe display shows ' SET 1 DATE '.

2Press SET/STO button to confirm.

ÖThe 'year' icon will be blinking.

3Press UP or DOWN button to set the year.

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

4. Setting up your phone

Press the SET/STO button to enter the menu and

then use UP or DOWN buttons to cycle through

the following options:

SET 1 DATE

SET 2 LCD

SET 3 FLASH

Note: The system will time out if you leave more

than 8 seconds between key presses.

You will need to set the correct time and date

so they can be displayed correctly on the display.

If you subscribe to a Caller Display service, the

time and date will be set automatically on receipt

of your first incoming call.

4 Press SET/STO button to confirm.

ÖThe 'month' icon will be blinking.

5Press UP or DOWN button to set the month.

6Press SET/STO button to confirm.

ÖThe 'date' icon will be blinking.

7Press UP or DOWN button to set the date.

8Press SET/STO button to confirm.

ÖThe 'hour' icon will be blinking.

9Press UP or DOWN button to set the hour.

ÖWhen setting the 'hour', the 'AM' or 'PM' icon

will automatically turn on to correspond the

hour time.

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

10 Press SET/STO button to confirm.

ÖThe 'minute' icon will be blinking.

Press UP or DOWN button to set the minute.

Press SET/STO button to confirm the setting.

ÖThe display shows ' SET 2 LCD ' , you can

continue with programming, or press DELETE

button to return to standby mode.

Set LCD 1In standby mode, press SET/STO button.

ÖThe display shows ' SET 1 DATE '.

2Press UP or DOWN button until the display

3Press SET/STO to confirm.

4Press UP or DOWN button to select your

5Press SET/STO button to confirm the setting.

ÖThe display shows ' SET 2 LCD ' , you can

continue with programming, or press DELETE

button to return to standby mode.

Contrast

shows 'SET 2 LCD'.

comfortable display viewing level (1~8).

The default setting is 3.

Set Flash

1In standby mode, press SET/STO button.

ÖThe display shows ' SET 1 DATE '.

2Press UP or DOWN button until the display

3Press SET/STO to confirm.

4Press UP or DOWN button to select 100 (default),

Time

shows 'SET 3 FLASH'.

300, 600, or 1000.

This telephone gives you the possibility to

use the special services of your network provider.

When pressing the RECALL button, the phone

generates a line interruption and the length

depends on your Flash Time setting.

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

Making a 1Lift the Handset, listen for a dial tone.

ÖThe display shows ' 00-00 '.

2Dial the telephone number you wish to call.

3To end the call, return the Handset to the Base

call

5Press SET/STO button to confirm the setting.

ÖThe display shows ' SET 1 DATE ' , you can

continue with programming, or press DELETE

button to return to standby mode.

5. Telephone Operations

ÖThe display shows the number as you dial

(maximum of 14 digits will be shown).

unit.

Receiving a 1When the phone rings, the ringer indictor flashes

2Pick up the Handset to answer the call.

3To end the call, return the Handset to the Base

call

ÖThe call timer starts about 7 seconds after

going on line.

unit cradle.

and the incoming phone number will be shown

on the display.

Last Number 1Lift the Handset.

2Press LNR button.

Redial

ÖThe phone automatically dials the last

number you called (maximum of 32 digits).

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

Mute 1During a call press MUTE button.

Function ÖWhen the mouthpiece is muted, the person

at the other end of the call cannot hear you

but you can hear his side.

To get back to the call, press MUTE

button again to release.

Inserting a

Pressing PAUSE button immediately after the

Pause in

For some switchboard system, an access number

must be dialed (usually an 8 or 9) to get another

dial tone and an outside line.

the dialing

sequence

access number, a pause of about 3.6 seconds

will be entered, and the desired number can be

dialed immediately.

Press PAUSE button to insert a pause when

dialing or storing Long Distance Access Codes.

Use on PBX

Press R (RECALL) button on your Spirit 410 phone.

If you are using your Spirit 410 phone on a PBX,

and the PBX user guide tells you to press RECALL;

Making a call

1In waiting mode, press CHECK button.

from the

ÖThe most recent outgoing call number and

duration will be displayed.

2Press CHECK repeatedly to find the record you

wish to call.

The telephone remembers the last 5 outgoing calls.

outgoing call

records

Press BACK button to auto-redial.

CHECK

BACK

Inhaltsverzeichnis

Andere Binatone Telefon Handbücher

Binatone

Binatone LYRIS 110 Bedienungsanleitung

Binatone

Binatone 3488 Bedienungsanleitung

Binatone

Binatone Cliptel 50 Bedienungsanleitung

Binatone

Binatone DECT Solo Single Bedienungsanleitung

Binatone

Binatone Lyris 710 Bedienungsanleitung

Binatone

Binatone Trend 3 Executive Bedienungsanleitung

Binatone

Binatone Speakeasy Combo 3865 Triple Bedienungsanleitung

Binatone

Binatone iDECT M3i Bedienungsanleitung

Binatone

Binatone iDECT Freedom Twin Bedienungsanleitung

Binatone

Binatone SPIRIT 710 Bedienungsanleitung

Binatone

Binatone DSR-3716PA Bedienungsanleitung

Binatone

Binatone Trend LCD Bedienungsanleitung

Binatone

Binatone CAPRICE CAPRICE 600 Bedienungsanleitung

Binatone

Binatone Caprice 670 Bedienungsanleitung

Binatone

Binatone SPEAKEASY 5 Bedienungsanleitung

Binatone

Binatone LYRIS 410 Bedienungsanleitung

Binatone

Binatone Caprice 670 Bedienungsanleitung

Binatone

Binatone Pegasys 8 Triple Bedienungsanleitung

Binatone

Binatone Trend 0119 Bedienungsanleitung

Binatone

Binatone Speakeasy 17 Bedienungsanleitung

Binatone

Binatone Speakeasy Combo 3410 Bedienungsanleitung

Binatone

Binatone DECT Combo Plus Single Bedienungsanleitung

Binatone

Binatone IDECT X3I SYSTEM Bedienungsanleitung

Binatone

Binatone 2102 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung