Binatone Caprice 670 Bedienungsanleitung

Caprice 670

Delete

Sto re /

Mute

OGM

Recall Pause/Redial Handsfree

ABC

5JKL

8TUV

4GHI

7PQRS

3DEF

6MNO

9WXYZ

MEMO

MENU/OK

FWDREW

Sto p

Calls

Mounting Stand

- When the instruction simply say 'press' a button, this means you should press it

briefly then release it.

- When the instruction say 'press and hold' a button, this means you should keep

it pressed until the display changes or you hear a tone.

Important:

Microphone -For

speakerphone use

and answering

machine OGM &

Memo recording.

With TAM ON is standby mode,

press to select OGM1 or OGM2.

- To access the caller

display records, and

UP-DOWN (Calls) Buttons

to scroll through lists

and options.

- Press to delete individual

messages, memos, stored

DELETE Button

light - Turns ON

when using the

speakerphone.

SPEAKERPHONE

- Turns ON

when the TAM

is on. Flashes

when you

have new TAM messages.

MESSAGE light

numbers or Caller Display

records.

- Press to enter Options

MENU/OK Button

Contrast,

phone/TAM settings.

- Press to access the

Phonebook records.

(PHONEBOOK) Button

- Press to access the LNR lists

when in standby mode. Press to

insert a pause when dialing.

PAUSE/REDIAL Button

- You may need this function if your

phone is connected to a PBX, or if

you use BT Calling Features.

RECALL Button

- Press to make, answer, or end a call

using the speakerphone.

- Press and hold to record

message(s).

- Press and hold to record

Press during message

Button

- Press to play back

Press to pause playing of

a memo or message.

PLAY/PAUSE Button

Button - Press to stop recording

/STOP (ANSWER ON/OFF)

- Used to adjust the volume

level of the Speakerphone.

SPEAKER Volume control

when you have new

Caller Display records.

New call light

- Flashes

M1, M2, M3 one-Touch

Memory Buttons

your outgoing messages.

Press during message

playback to repeat the

current message or to

go back to the previous

or playback. Press and hold to

switch the answering maching

ON or OFF.

a memo.

playback to skip to the

next message.

messages and memos.

- Press

mouthpiece. Press to store

and M3) one

during a call

mute the microphone or

the (M1, M2

touch memory dialing

buttons

Menu to set the Date,

Time,Screen

Del ete

Sto re /

Mut e

OGM

Rec all Pa us e/R edi al Ha nds fre e

ABC

5JKL

8TUV

4GHI

7PQR S

3DEF

6MNO

9WXY Z

MEM O

MEN U/O K

Cal ls

FWDREW

Sto p

HADNSFREE Button

STORE/MUTE Button

FWD/MEMO

OGM/REW Button

Phone You are connected to the telephone line - your

Handset is ‘offhook’.

Time Displays the time.

Date/Month Displays the day and month setting.

Speakerphone Appears when the speakerphone function is

turned ON.

Mute Appears when you press the MUTE button to

Message Appears only when viewing a Caller display entry

with a recorded answering machine message.

NEW The NEW icon only appears when viewing

New Caller Display records.

Caller Display

Record

Shows the total number of Caller Display records

when the caller display is being received or when

the call lists is being viewed.

mute the mouthpiece or microphone.

2. Installation

1. Locating the Base unit

The Base unit should be placed on a level surface, in a position where:

the mains adapter plug will reach an easily accessible 230-V AC

switch mains supply socket - never try to lengthen the mains power cable.

the telephone line cable will reach your telephone line socket or

extension socket.

it is not close to a sink, bath or shower, or anywhere else where it

might get wet.

it is not close to other electrical equipment - fridges, washing

machines, microwave ovens, TVs, fluorescent lights, etc.

2. Plug the coiled handset cord into the Handset. Plug the other end into

the jack on the left side of the Base unit.

Note: The base unit doesn't

require a battery.

3. Place the Handset on

the Base unit.

4. Plug the telephone line cord into

the PHONE LINE jack at the back

of the Base unit. Plug the other

end into your telephone line socket 5. Plug the power supply cord

into the POWER jack at the

back of the Base unit. Plug

the other end to a 230V AC,

50Hz mains socket, with the

switch on the socket set to OFF

6.Switch ON the mains power at

the socket. Wait while the

7.Lift the Handset and check

for Dial tone in the earpiece.

Note:TheCaprice 670Base unit must be used

only with the Switch adapter Shen Zhen G.EREDIT

Always use the telephone

line cord supplied with your

Caprice 670. Other telephone

line cords may not work.

Make sure the plugs click

into place.

or extension socket.

display shows INITIALISATION,

then the announcement

Answering machine on.

Announcement one before

the display changes to the

“

”

standby screen.

Modular

Wall jack

Electronics Co.,Ltd.5E-AD070042-B.

3.Stand/ Half stand installation

To stand the Caprice 670 at a larger angle, fit

the stand to the bottom of the phone in the

slots

Stand Mount

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

Insert the rigid clips (1) of the stand into the slots

on the bottom of the phone (near the rear of

the base). Press down firmly until the flexible

clips (2) click into place.

The base stand can be fitted in two positions to tilt the base forward at

in the base, as shown below.

different angles.

(1) Full stand mount (2) Half stand mount

rigid clips stand

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

Stand/Half Stand mounting continue...

Insert the rigid clips (1) of the stand into the slots

near the rear of the base and press down firmly

until the flexible clips (3) click into place.

To remove the half stand,pinch the flexible

Half Stand

Mount

To remove the stand, (1) pinch the flexible

clips, (2) pull back the stand, and then (3)

(3) as shown below.move up and forward

To stand the Caprice 670 at a lower angle,

the alternative slots in the base,

fit the stand to the bottom of the phone in

as shown

below.

forward to remove.

clips (3), then lift the front (2) and slide

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

4. Setting up the Caprice 670

The following section details how to set up your telephone.

Press the MENU button to enter the Options menu and then use

the UP or DOWN buttons to cycle through the following options:

SET LANGUAGE

SET TIME/DATE

SET FLASH TIME

LCD CONTRAST

MESSAGE LENGTH

RINGS TO ANSWER

REMOTE ACCESS

TAM HD: ON/OFF

Note: The system will time out if you leave more than

10 seconds between key presses.

With the phone in standby mode;

1 Press MENU/OK button.

ÖThe display shows

OPTIONS MENUOPTIONS MENU

OPTIONS MENU

2 Press UP button to go to the language setting.

ÖThe display shows

SET LANGUAGESET LANGUAGE

SET LANGUAGE

3 Press MENU/OK button to confirm.

4 Press UP or DOWN button to select ENGLISH

(default), FRANCAIS, or DEUTSCH.

5 Press MENU/OK button to confirm.

6 Continue with programming, or press /STOP

button to return to standby mode.

SET

LANGUAGE

1 Press MENU/OK button.

ÖThe display shows

OPTIONS MENUOPTIONS MENU

OPTIONS MENU

2 Press UP or DOWN button until the display

shows

SET TIME/DATESET TIME/DATE

SET TIME/DATE

3 Press MENU/OK button to confirm.

ÖThe ‘year’ will be blinking.

SET TIME/

DATE

EXIT OPTION

Note: if you subscribe to the caller display service

(see section 9) the time and date will be set

automatically,but the year may still need to be

adjusted to ensure the answering machine time

stamp gives the correct day.

To set the Answering Machine

recording quality / total recording time.(ON gives up to 8

minutes of higher quality, OFF gives up to 20 minutes of

lower quality.)

MENU/OK

Stop

MENU/OK

Call s

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

Setting up continue...

4 Press UP or DOWN button to set the year.

5 Press MENU/OK button to confirm.

ÖThe ‘month’ will be blinking.

6 Press UP or DOWN button to set the month.

7 Press MENU/OK button to confirm.

ÖThe ‘date’ will be blinking.

8 Press UP or DOWN button to set the date.

9 Press MENU/OK button to confirm.

ÖThe ‘hour’ will be blinking.

10 Press UP or DOWN button to set the hour.

11 Press MENU/OK button to confirm.

ÖThe ‘minutes’ will be blinking.

12 Press UP or DOWN button to set the minute.

13 Press MENU/OK button to confirm the TIME and

DATE setting.

14 Continue with programming, or press /STOP

button to return to standby mode.

1Press MENU/OK button.

ÖThe display shows

OPTIONS MENUOPTIONS MENU

OPTIONS MENU

2Press UP or DOWN button until the display

shows

SET FLASH TIMESET FLASH TIME

SET FLASH TIME

3Press MENU/OK button to confirm.

SET FLASH

TIME You may need the Recall function if your phone is

connected to a PBX, or if you use BT Calling Features.

Flash is another name for the R (Recall) button,

4Press UP or DOWN button to select 100MS

(default), 300MS, 600MS or 1000MS.

When setting the 'hour' it is in 24 hour

mode only.

and the normal UK requirement is for 100ms, but

some PBX may need a longer time, in which case

you can change the setting from the Options Menu.

MENU/OK

Stop

MENU/OK

Call s

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

5 Press MENU/OK button to confirm.

6 Continue with programming, or press /STOP

button to return to standby mode.

1 Press MENU/OK button.

ÖThe display shows

OPTIONS MENUOPTIONS MENU

OPTIONS MENU

2 Press UP or DOWN button until the display

shows

LCD CONTRASTLCD CONTRAST

LCD CONTRAST

3 Press MENU/OK button to confirm.

4 Press UP or DOWN button to select your

comfortable display viewing level (1~5). The

default setting is 3.

5 Press MENU/OK button to confirm.

6 Continue with programming, or press /STOP

button to return to standby mode.

To set the maximum recording time for each

1 Press MENU/OK button.

ÖThe display shows

OPTIONS MENUOPTIONS MENU

OPTIONS MENU

2 Press UP or DOWN button until the display

shows

MESSAGE LENGTHMESSAGE LENGTH

MESSAGE LENGTH

3 Press MENU/OK button to confirm.

4 Press UP or DOWN button to select 1 or 2

minutes. The default setting is 2 minutes.

5 Press MENU/OK button to confirm the MESSAGE

LENGTH setting.

6 Continue with programming, or press /STOP

button to return to standby mode.

Setting up continue...

LCD

CONTRAST

MESSAGE

LENGTH

To set the number of rings before the machine

answers a call;

1 Press MENU/OK button.

ÖThe display shows

OPTIONS MENUOPTIONS MENU

OPTIONS MENU

RINGS TO

ANSWER

incoming message or memo message on the

Answering Machine.

MENU/OK

Stop

MENU/OK

Stop

MENU/OK

Stop

MENU/OK

Call s

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

2 Press UP or DOWN button until the display

shows

RINGS TO ANSWERRINGS TO ANSWER

RINGS TO ANSWER

3 Press MENU/OK button to confirm.

4Press UP or DOWN button to select TOLL SAVER,

2, 3, 4, 5, 6, 7, 8, or 9 rings. The default setting is 5.

ÖUse ‘TOLL SAVER’ when checking your Caprice 670

for messages from a remote location using long

distance service or from a pay phone. The

after the 2nd ring only

message waiting. If there are no

5 Press MENU/OK button to confirm.

6 Continue with programming, or press /STOP

button to return to standby mode.

The REMOTE ACCESS is a three-digit code you

your

1 Press MENU/OK button.

ÖThe display shows

OPTIONS MENUOPTIONS MENU

OPTIONS MENU

2 Press UP or DOWN button until the display

shows

REMOTE ACCESSREMOTE ACCESS

REMOTE ACCESS

3 Press MENU/OK button to confirm.

ÖThe first digit of the code will be blinking.

4 Press UP or DOWN button to set the first digit

of the REMOTE ACCESS code.

Setting up continue...

REMOTE

ACCESS

5 Press MENU/OK button to confirm.

ÖThe second digit of the code will be blinking.

6 Press UP or DOWN button to set the second

digit of the REMOTE ACCESS code.

7 Press MENU/OK button to confirm.

ÖThe third digit of the code will be blinking.

need if you call away from home to check

messages.The default is 321. You can change it to

any three digits you want.

Answering machine responds

if you have a new

new messages, the phone will answer after the 4th

ring. You can then hang up after the 3rd ring to

avoid paying for the call.

MENU/OK

Stop

MENU/OK

Call s

Andere Handbücher für Caprice 670

Inhaltsverzeichnis

Andere Binatone Telefon Handbücher

Binatone

Binatone Lyris 710 Bedienungsanleitung

Binatone

Binatone 2102 Bedienungsanleitung

Binatone

Binatone IDECT X3I SYSTEM Bedienungsanleitung

Binatone

Binatone DSR-3716PA Bedienungsanleitung

Binatone

Binatone Speakeasy 6 Bedienungsanleitung

Binatone

Binatone LYRIS 110 Bedienungsanleitung

Binatone

Binatone PB10 Bedienungsanleitung

Binatone

Binatone LYRIS 310 Bedienungsanleitung

Binatone

Binatone Acura 3000 Bedienungsanleitung

Binatone

Binatone iDECT M3i Bedienungsanleitung

Binatone

Binatone 433 Bedienungsanleitung

Binatone

Binatone iDECT L1i System Bedienungsanleitung

Binatone

Binatone IHOME PHONE - Bedienungsanleitung

Binatone

Binatone iDECT Freedom Twin Bedienungsanleitung

Binatone

Binatone Pegasys 8 Triple Bedienungsanleitung

Binatone

Binatone CAPRICE 500 Bedienungsanleitung

Binatone

Binatone Reliant 510 Bedienungsanleitung

Binatone

Binatone Cliptel 50 Bedienungsanleitung

Binatone

Binatone Trend 3 Executive Bedienungsanleitung

Binatone

Binatone Trend Bedienungsanleitung

Binatone

Binatone IDECT X3 Bedienungsanleitung

Binatone

Binatone Acura 3000 Bedienungsanleitung

Binatone

Binatone Speakeasy 17 Bedienungsanleitung

Binatone

Binatone DECT Solo Single Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

D-Link

D-Link DWR-720/PW Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Panasonic

Panasonic KX Series Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung