BioSmart PV-WM Bedienungsanleitung

BioSmart PV-WM

Installation Guide

www.biosmart-tech.com

1 PV-WM Installation Guide v1.2|10.2018|en

Contents

Contents.............................................................................................................................................................1

Safety Instructions.............................................................................................................................................2

1. Overview ....................................................................................................................................................3

Specifications......................................................................................................................................3

Part names and functions...................................................................................................................4

Package contents................................................................................................................................4

Opening the case................................................................................................................................4

Circuit board.......................................................................................................................................5

Circuit board LEDs and jumpers .........................................................................................................5

Connector names and description .....................................................................................................5

2. Installation .................................................................................................................................................6

Cable types .........................................................................................................................................6

General installation notes ..................................................................................................................6

Mounting on wall ...............................................................................................................................6

Power supply connection ...................................................................................................................7

UniPass connection ............................................................................................................................8

2 PV-WM Installation Guide v1.2|10.2018|en

Safety Instructions

Safety instructions must be followed in addition to International Standards (ISO/IEC)*, and other

safety regulations.

Caution

Caution indicates a hazard with a low level of risk which, if not avoided, could

result in minor or moderate injury.

Note

Note indicates an important remark, which should be taken into attention.

Caution

General requirements:

Read, follow and retain instructions –All safety and operating instructions

must be read and followed properly before putting the unit into operation.

Do not turn on the power supply until all installation procedures are

finished –this may lead to injury or equipment damage.

Do not disconnect or connect cables while unit is powered on –this may

lead to unit malfunction and software errors.

Do not expose unit to heat or fire –high temperature impact may lead to

case deformation and circuit board damage.

Make sure that all cables and screws are fastened properly - otherwise

case damage or circuit shortcut may happen.

Note

Additional requirements:

Use a clean, dry cloth to remove any dirt or dust from the unit.

*IEC 60204-1: Safety of machinery –Electrical equipment of machines. (Part 1: General requirements)

3 PV-WM Installation Guide v1.2|10.2018|en

1. Overview

The BioSmart PV-WM Reader is a wall-mounted device, designed to capture a palm-vein template

or RFID card code and send it to BioSmart UniPass controller. Reader is not suited for stand-alone

application.

Specifications

Scanner type

Infrared

Scanning range

40-60 mm

Integrated RFID card reader

EM-Marine, HID, Legic, Mifare,

Card scanning range, mm

Up to 50 mm

Communication interface

Ethernet (IEEE 802.3,100BASE-T)

Case opening sensor

Yes

Power supply

12VDC±15%, 0,4 A, PoE

IEEE802.3af class 3

Operating temperature

-40 to +50 °C

Design

Laid-on plastic

Installation

Wall mount

Dimensions (H x W x D)

175 х 150 х 140 mm

Weight

Net: 650 g; gross: 675 g

Warranty

5 years

4 PV-WM Installation Guide v1.2|10.2018|en

Part names and functions

Name

Description

LED indicator

Blue –waiting mode

Green –identification successful

Red –identification failed

RFID card reader

RFID card identification

Palm vein scanner

Palm vein identification

Mounting holes

Suited for fixing screws

Cable inputs

Detachable panels, suited for cable inputs

Package contents

Item

Number, pcs

BioSmart PV-WM Reader

Mounting kit (four 6х35 dowels, four

3.5х38 self-tapping screws)

Opening the case

1) Remove two mounting screws on bottom and detach the steel plate;

2) Remove four mounting screws on back cover;

2) Detach the cover from the front part of the case to access the circuit board.

5 PV-WM Installation Guide v1.2|10.2018|en

Circuit board

Circuit board LEDs and jumpers

Name

Type

Description

VL26

LED

Indicates if board is powered up

VL27

LED

Indicates if PoE supply is on

IP RST

Jumper

IP settings reset

BOOT

Jumper

Boot mode

Connector names and description

№

Name

Description

Used for

GND

Power supply -ground

Power supply

+12V

+12VDC Power supply

Power supply

Ethernet

Ethernet interface connection

UniPass controller connection, PoE supply

6 PV-WM Installation Guide v1.2|10.2018|en

2. Installation

Cable types

№

Cable connection

Max. length

Type

Ethernet (IEEE 802.3)

100 m.

Four twisted pair cables of no lower than category five

with a wire size of no less than 0.2 mm2

Power source

50 m.

Duplex cable with a wire size of no less than 0.75 mm2(for

example, 3192Y)

General installation notes

Install the reader on vertical surface;

Cables must be installed in accordance with the operational code for electrical

installations;

Do not lay cables within 30 cm of sources of electromagnetic interference;

All cables must only intersect power cables at a right angle;

All cable extensions must be soldered.

Carefully check for mechanical damage on the surface of the reader circuit board and case;

In order to avoid short circuits, the protected ends of cables used to connect the reader

must not exceed 5 mm.

Mounting on wall

1. Decide where to install reader, using a mounting template.

2. Drill holes, according to a mounting template and insert dowels inside the holes.

3. Place metal plate on wall and fix it with self-tapping screws.

4. Put cables through back cover cable input.

5. Attach the cover to reader and fix it with four mounting screws.

6. Connect cables according to p.2.4-2.5.

7. Attach reader to the plate and fix the retaining screws.

7 PV-WM Installation Guide v1.2|10.2018|en

Power supply connection

Use a DC 12 V power supply adaptor with a minimum of 1,000 mA, which has obtained the

approval of IEC/EN 60950-1;

See recommended cable type and maximum length of the cable in Cable types table;

Power supply can also be provided via PoE from UniPass (see 2.5);

8 PV-WM Installation Guide v1.2|10.2018|en

UniPass connection

UniPass Ethernet connection ports are equipped with PoE sources;

See recommended cable type in Cable types table;

The order of connections in the cable’s modular connector must correspond to the TIA/EIA-568-

B standard.

Support

support@biosmart-tech.com

+420 246 097 126

Skype: BioSmart TechSupport

+420 246 097 126

Konevova 2660/141, 130 00 Prague, Czech Republic

www.biosmart-tech.com

sale@biosmart-tech.com

Inhaltsverzeichnis

Andere BioSmart IP-Zugriffskontrollsysteme Handbücher

BioSmart

BioSmart BioSmart PalmJet Bedienungsanleitung

BioSmart

BioSmart 5M-O Bedienungsanleitung

BioSmart

BioSmart PV-WTC-EM Bedienungsanleitung

BioSmart

BioSmart PV-WM-MU Bedienungsanleitung

Beliebte IP-Zugriffskontrollsysteme Handbücher anderer Marken

ZKTeco

ZKTeco SpeedFace-V5L Bedienungsanleitung

Jantar

Jantar REX A-1-9 Bedienungsanleitung

2N Access Unit Merkblatt

Kedacom

Kedacom KSCA120 Series Bedienungsanleitung

H3C

H3C WX2880X Bedienungsanleitung

G4S

G4S S870-EX Leitfaden

PRASTEL

PRASTEL M2000PE Bedienungsanleitung

Allegion

Allegion interflex IF-281 Cylinder Bedienungsanleitung

TECOM

TECOM TS1067E Bedienungsanleitung

Fermax

Fermax Memokey 100C Benutzerhandbuch

Fermax

Fermax CITYLINE MEMOKEY Bedienungsanleitung

Software House

Software House iSTAR Pro 2U RM Bedienungsanleitung

AKCP

AKCP SP+ Bedienungsanleitung

Bpt

Bpt HNA/102 Bedienungsanleitung

Civintec

Civintec CV9601T-T-1F Bedienungsanleitung

BioMax

BioMax N-X90W Bedienungsanleitung

ZKTeco

ZKTeco OP-200 Bedienungsanleitung

FingerTec

FingerTec s-Kadex Bedienungsanleitung