Biostar TH61U3+ Benutzerhandbuch

TH61U3+/ TH61+Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. There is no guarantee

that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the

contents here and specially disclaims any implied warranties of merchantability

or fitness for any purpose. Further the vendor reserves the right to revise this

publication and to make changes to the contents here without obligation to

notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be responsible for any mistakes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

Dichiarazione di conformità

sintetica

Ai sensi dell’art. 2 comma 3 del D.M.

275 del 30/10/2002

Si dichiara che questo prodotto è

conforme alle normative vigenti e

soddisfa i requisiti essenziali richiesti

dalle direttive

2004/108/CE, 2006/95/CE e

1999/05/CE

quando ad esso applicabili

Short Declaration of conf ormity

We declare this product is complying

with the laws in force and meeting all

the essential requirements as specified

by the directives

2004/108/CE, 2006/95/CE and

1999/05/CE

whenever these laws may be applied

Table of Contents

Chapter 1: Introduction ........................................ 1

1.1 Before You Start ................................................................................ 1

1.2 Package Checklist............................................................................. 1

1.3 Motherboard Features...................................................................... 2

1.4 Rear Panel Connectors ..................................................................... 3

1.5 Motherboard Layout......................................................................... 4

Chapter 2: Hardware Installation .......................... 5

2.1 Installing Central Processing Unit (CPU)....................................... 5

2.2 FAN Headers...................................................................................... 7

2.3 Installing System Memory ................................................................ 8

2.4 Connectors and Slots ....................................................................... 10

Chapter 3: Headers & Jumpers Setup .................. 13

3.1 How to Setup Jumpers .................................................................... 13

3.2 Detail Settings.................................................................................. 13

Chapter 4: Useful Help ........................................ 17

4.1 Driver Installation Note.................................................................. 17

4.2 Software............................................................................................ 18

4.3 Extra Information............................................................................ 22

4.4 AMI BIOS Beep Code....................................................................... 23

4.5 Troubleshooting............................................................................... 24

Appendix: SPEC In Other Languages ................... 26

German.................................................................................................................. 26

French .................................................................................................................... 28

Italian..................................................................................................................... 30

Spanish ................................................................................................................... 32

Portuguese ............................................................................................................ 34

Polish...................................................................................................................... 36

Russian ................................................................................................................... 38

Arabic..................................................................................................................... 40

Japanese ................................................................................................................ 42

TH61U3+/ TH61+

CHAPTER 1: INTRODUCTION

1.1 BEFORE YOU START

Thank you for choosing our product. Before you start installing the

motherboard, please make sure you follow the instructions below:

Prepare a dry and stable working environment with

sufficient lighting.

Always disconnect the computer from power outlet

before operation.

Before you take the motherboard out from anti-static

bag, ground yourself properly by touching any safely

grounded appliance, or use grounded wrist strap to

remove the static charge.

Avoid touching the components on motherboard or the

rear side of the board unless necessary. Hold the board

on the edge, do not try to bend or flex the board.

Do not leave any unfastened small parts inside the

case after installation. Loose parts will cause short

circuits which may damage the equipment.

Keep the computer from dangerous area, such as heat

source, humid air and water.

The operating temperatures of the computer should be

0 to 45 degrees Celsius.

1.2 PACKAGE CHECKLIST

Serial ATA Cable X 2

Rear I/O Panel for ATX Case X 1

User’s Manual X 1

Fully Setup Driver CD X 1

USB 2.0 Cable X1 (optional)

Serial ATA Power Cable X 1 (optional)

Note: The package contents may be different due to area or your motherboard version.

Motherboard Manual

1.3 MOTHERBOARD FEATURES

TH61U3+ TH61+

CPU

Socket 1155

Intel Core i7 / i5 / i3 / Pentium p rocessor

Supports Execute D isable Bit / Enhanced Intel

SpeedStep® / Intel Architecture-64 / Extended

Memory 64 Technology / Virtualization

Technology

Socket 1155

Intel Core i7 / i5 / i3 / Pentium p rocessor

Supports Execute D isable Bit / Enhanced Intel

SpeedStep® / Intel Architecture-64 / Extended

Memory 64 Technology / Virtualization

Technology

Chipset Intel H61 Intel H61

Super I/O

ITE 8728

Provides the most commonly used legacy Super

I/O functionality.

Low Pin Count Interface

Env iro nm ent Co ntrol in it iat ives ,

Hardware Monitor Controller

Fan Speed Contro ller

ITE's "Smart Guardian" funct ion

ITE 8728

Provides the most commonly used legacy Super

I/O functionality.

Low Pin Count Interface

Env iro nm ent Co ntrol in it iat ives ,

Hardware Monitor Controller

Fan Speed Contro ller

ITE's "Smart Guardian" funct ion

Main Memory

DIMM Slots x 2

Each DIMM supports 512MB / 1GB / 2GB / 4GB

DDR3

Max Memory Capacity 8GB

Dual Channel Mode DDR3 memory modu le

Supports DDR3 1333/1066

Registered DIMM and ECC D IMM is not

supported

DIMM Slots x 2

Each DIMM supports 512MB / 1GB / 2GB / 4GB

DDR3

Max Memory Capacity 8GB

Dual Channel Mode DDR3 memory modu le

Supports DDR3 1333/1066

Registered DIMM and ECC D IMM is not

supported

SATA 2

Integrated Serial ATA Controller

Data transfer rates up to 3.0 Gb/s.

SATA Version 2.0 specif icat ion co mp liant

Integrated Serial ATA Controller

Data transfer rates up to 3.0 Gb/s.

SATA Version 2.0 specif icat ion co mp liant

LAN Realtek RTL8111E

10 / 100 Mb/s / 1Gb/s auto negotiation

Realtek RTL8111E

10 / 100 Mb/s / 1Gb/s auto negotiation

Sound Codec

ALC892

5.1 channels audio out

High Definition Audio

ALC892

5.1 channels audio out

High Definition Audio

USB3.0 NEC uPD720200 / Asmedia ASM1042

PCI Express Gen2 x16 Slot x2 PCI Express Gen2 x16 Slot x2

PCI Express Gen2 x1 Slot x1 PCI Express Gen2 x1 Slot x1

Slots

PCI Slot x1 PCI Slot x1

Serial Port Connector x1 Serial Port Connector x1

SATA Connector x4 SATA Connector x4

Front Panel Connector x1 Front Panel Connector x1

Front Audio Connector x1 Front Audio Connector x1

S/PDIF out Connector x1 S/PDIF out Connector x1

CPU Fan Header x1 CPU Fan Header x1

System Fan Header x2 System Fan Header x2

On Board

Connectors

Clear CMOS Head er x1 Clear CMOS Header x1

TH61U3+/ TH61+

TH61U3+ TH61+

USB 2.0 Connector x2 USB 2.0 Connector x2

Consumer IR Connector x1 Consumer IR Connector x1

Power Connector (24pin) x1 Power Connector (24pin) x1

Power Connector (4pin) x1 Power Connector (4pin) x1

Back Panel

I/O

PS/2 Keyboard / Mouse x1

HDMI Port x1

VGA Port x1

DVI-D Port x1

LAN Port x1

USB2.0 Port (by H61) x2

USB3.0 Port (by NEC uPD720200 /

Asmedia ASM1042) x2

Audio Jack x3

PS/2 Keyboard / Mouse x1

HDMI Port x1

VGA Port x1

DVI-D Port x1

LAN Port x1

USB2.0 Port x4

Audio Jack x3

Board Size 230 (W) x 244 (L) mm 230 (W) x 244 (L) mm

OS Support

Windows XP / Vista / 7

Biostar reserves the right to add or remove

support for any OS with or without notice

Windows XP / Vista / 7

Biostar reserves the right to add or remove

support for any OS with or without notice

1.4 REAR PANEL CONNECTORS

USB3.0X2

LAN

HDMI VGADVI-D

Line In/

Surround

Line Out

Mic In 1/

Bass/ Center

PS/2

Keyboard / Mouse

US B2 .0X 2

(For TH61U3+ )

USB2.0X2

(For TH61+)

NOTE: HDMI / DV I-D / VGA Output req uire an Intel Core family processor with Intel Graphics

Te c h n o l o g y.

NOTE: Maximum resolution:

HDMI: 1920 x 1200 @60Hz

DVI: 1920 x 1200 @60Hz

VGA: 2048 x 1536 @75Hz

NOTE: This motherboard supports Multiple VGA output, and the configuration is as below:

(HDMI is not supported under DOS and BIOS setup.)

Display Devices VGA + HDMI VGA + DVI-D HDMI + DVI-D

Enabled O O O

Motherboard Manual

1.5 MOTHERBOARD LAYOUT

USB_KBMS1

HDMI1 VGA1

DVI1

RJ45USB1

AUDIO1

SYS_FAN2

Super

I/O

CODEC

F_AUDIO1

JSPDIFOUT1

CIR1

J_COM1 SYS_FAN1

LAN

PEX16_1

PEX16_2

PEX1_1

PCI1

BAT1

F_USB2 F_USB1

PAN EL1

SATA4 SATA3

SATA2 SATA1

BIOS

H61

ATXPWR1

JCMOS1

DDR3_A1

DDR3_B1

CP U_FAN 1

Socket 1155

CPU1

ATXP WR 2

Note: ■represents the 1st pin.

TH61U3+/ TH61+

CHAPTER 2: HARDWARE INSTALLATION

2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU)

Special Notice:

Remove Pin Cap before installation, and make good preservation

for future use. When the CPU is removed, cover the Pin Cap on the

empty socket to ensure pin legs won’t be damaged.

Step 1: Pull the socket locking lever out from the socket and then raise

the lever up.

Step 2: Remove the Pin Cap.

Motherboard Manual

Step 3: Look for the triangular cut edge on socket, and the golden dot on

CPU should point forwards this triangular cut edge. The CPU will

fit only in the correct orientation.

Step 4: Hold the CPU down firmly, and then lower the lever to locked

position to complete the installation.

Step 5: Put the CPU Fan and heatsink assembly on the CPU and buckle it

on the retention frame. Connect the CPU FAN power cable into

the CPU_FAN1 to complete the installation.

TH61U3+/ TH61+

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan

cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to

pin#1.

CPU_FAN1: CPU Fan Header

Assignment

1 Ground

2 +12V

3 FAN R PM

rate sense

4 Smart Fan

Control

SYS_FAN1/SYS_FAN2: System Fan Headers

Assignment

1 Ground

2 +12V

SYS_FAN2

SYS_FAN1

3 FAN RPM

rate sense

Note:

The SYS_FAN1/SYS_FAN2 support 3-pin head connectors; the CPU_FAN1 supports

4-pin head connector. When connecting with wires onto connectors, please note that the

red wire is the positive and should be connected to pin#2, and the black wire is Ground

and should be connected to GND.

Motherboard Manual

2.3 INSTALLING SYSTEM MEMORY

A. Memory Modules

DDR3_A1

DDR3_B1

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a

DIMM on the slot such that the notch on the DIMM matches the

break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining

chip snap back in place and the DIMM is properly seated.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Biostar Hauptplatine Handbücher

Biostar

Biostar Hi-Fi Z77X Bedienungsanleitung

Biostar

Biostar P4 TSE-D2 Bedienungsanleitung

Biostar

Biostar Hi-Fi A85S3 Bedienungsanleitung

Biostar

Biostar H510MX/E 2.0 Bedienungsanleitung

Biostar

Biostar B560GTQ Bedienungsanleitung

Biostar

Biostar N68S3PLUS - BIOS Benutzerhandbuch

Biostar

Biostar 945PL-M7 Benutzerhandbuch

Biostar

Biostar GF7025-M2 TE - BIOS SETUP Benutzerhandbuch

Biostar

Biostar G41D3 Handbuch

Biostar

Biostar P4VTC Bedienungsanleitung

Biostar

Biostar B660MX-E Bedienungsanleitung

Biostar

Biostar M6VLA Bedienungsanleitung

Biostar

Biostar A68MHE Bedienungsanleitung

Biostar

Biostar TB360-BTC PRO 2.0 Bedienungsanleitung

Biostar

Biostar A960D+V3 Bedienungsanleitung

Biostar

Biostar M6TLI Handbuch

Biostar

Biostar A68N-2100E Bedienungsanleitung

Biostar

Biostar G41D3+ Bedienungsanleitung

Biostar

Biostar B550M-SILVER Bedienungsanleitung

Biostar

Biostar TG31-A7 Benutzerhandbuch

Biostar

Biostar M7NCD Ultra Bedienungsanleitung

Biostar

Biostar U8798 Pro Benutzerhandbuch

Biostar

Biostar TA990FXE Bedienungsanleitung

Biostar

Biostar M7 VKD Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung