Quick manual www.bitstream.pl
RJ45 connector output appearance and numbering
Ethernet interface status signaling
Each Ethernet port is equipped with two signal LEDS.
1G – Ethernet link signaling for 1000Mbit/s throughput
10/100 – Ethernet link signaling for 10/100Mbit/s throughput
The distribution of individual signals for R -45 connectors is shown in the table.
C nnect r RJ-45 (PE1-PE4) Ethernet 10/100Mbit/s
1 (orange white) RXAn
2 (Orange) RXBn
3 (white green) TXAn
6 (Green) TXBn
Channel transmitter n
Channel receiver n
C nnect r RJ-45 (PE1-PE4) Ethernet 1000Mbit/s
1 (orange white) BI_DA+ Two-way contact +A
2 (Orange) BI_DA- Two-way contact -A
3 (white green) BI_DB+ Two-way contact +B
4 (blue) BI_DC+ Two-way contact +C
5 (white blue) BI_DC- Two-way contact -C
6 (Green) BI_DB- Two-way contact -B
7 (white brown) BI_DD+ Two-way contact +D
8 (Brown) BI_DD- Two-way contact -D
n – Ethernet channel number( (1-4)
Arrangement of individual signals for the connector RS1
The remaining connectors as described on the elevation of the device*:
* - IO port functionality implemented according to specific customer requirements.
