BIXOLON XT5-40 Series Montageanleitung

1. Turn the Power Switch Off at the rear of the Printer and open the Cover.

2. Disassemble the Cover STD by pressing it down (yellow arrow).

3. Align the red marked part with the yellow square groove, and assemble with 2

screws provided.

4. Loosen 1(one) side Screw at the below red marked.

4. Insert & assemble the hook on the red circle mark into the yellow mark and tighten

the screw loosened in step 4.

※When assembling, be careful not to pinch the wire.

5. Insert Peeler Wire into Peeler Connector and arrange wire with Cable Tie.

6. Please close the Cover.

7. Press the Peeler Lever inward (yellow arrow) to open the cover, and change

the Switch to On. Then close the Peeler Cover until it clicks into place.

8. Turn on the power and check if the Peeler Sensor LED turns green.

※Refer to the User Manual for how to install paper.

How to Mount Peeler

KN04-00219A (Ver.1.0)

XT5 Series

Cover STD

Cover

Off

Power Switch

Screw

Peeler Lever

Switch

Peeler Wire

Peeler Connector

Cable Tie

Cover

Peeler Sensor LED

1. Printer 후면의 Power Switch 를Off 하고 Cover 를열어주십시오

2. Cover STD 를아래 방향(노란색 화살표)으로 눌러 분리하십시오.

3. 빨간색 원표시 부Hole 을노란색 사각형 홈에 맞추어 제공된 Screw 2 개를

체결하십시오.

4. 측면 Screw 1 개를 분리하십시오.

4. 빨간색 원표시 부의 Hook 를노란색 사각형 홈에 삽입하여 조립하고

순서 4에서 분리한 Screw 를체결하십시오

※조립 시Wire 가끼이지 않도록 주의하십시오.

5. Peeler Wire 를방향에 맞추어 Peeler Connector 에삽입하고 Cable Tie 로

Wire 를정형하십시오.

6. Cover 를닫아주십시오.

7. Peeler Lever 를안쪽방향(노란색 화살표)으로 눌러 커버를 열고 하기와 같이

Switch 를On 으로 변경하십시오. 그리고 Peeler Cover 를딸깍 소리가 날때까지

닫아주십시오.

8. 전원장치를 연결하여 전원을 켜고 Peeler Sensor LED 에녹색 점등이 되는지

확인하십시오.

※용지 설치 방법은 User Manual 을참조하여 주십시오.

Peeler 장착 방법

KN04-00219A (Ver.1.0)

XT5 시리즈

Cover STD

Cover

Off

Power Switch

Screw

Peeler Lever

Switch

Peeler Wire

Peeler Connector

Cable Tie

Cover

Peeler Sensor LED

Andere Handbücher für XT5-40 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere BIXOLON Etikettendrucker Handbücher

BIXOLON

BIXOLON SLP-DX220B Bedienungsanleitung

BIXOLON

BIXOLON SPP-L3000 Bedienungsanleitung

BIXOLON

BIXOLON XD3-40t Bedienungsanleitung

BIXOLON

BIXOLON XQ-840 Series Bedienungsanleitung

BIXOLON

BIXOLON XD Series Montageanleitung

BIXOLON

BIXOLON SLP-TX400 Bedienungsanleitung

BIXOLON

BIXOLON SLP-TX400R Betriebsanleitung

BIXOLON

BIXOLON SLP-DL413KV Bedienungsanleitung

BIXOLON

BIXOLON XT5-43S Bedienungsanleitung

BIXOLON

BIXOLON XT Series Gebrauchsanweisung

BIXOLON

BIXOLON SLP-DX223B Bedienungsanleitung

BIXOLON

BIXOLON XT5-40 Series Montageanleitung

BIXOLON

BIXOLON XL5-40CT Series Bedienungsanleitung

BIXOLON

BIXOLON SLP-DX220 Bedienungsanleitung

BIXOLON

BIXOLON SLP-TX400 Bedienungsanleitung

BIXOLON

BIXOLON SLP-DL413 Bedienungsanleitung

BIXOLON

BIXOLON SRP-382II Montageanleitung

BIXOLON

BIXOLON XF3-40 Bedienungsanleitung

BIXOLON

BIXOLON XT5-40 Series Bedienungsanleitung

BIXOLON

BIXOLON SRP-E770III Series Bedienungsanleitung

BIXOLON

BIXOLON SLP-DX420 Bedienungsanleitung

BIXOLON

BIXOLON SLP-TX220B Bedienungsanleitung

BIXOLON

BIXOLON SLP-TX400 Administratorhandbuch

BIXOLON

BIXOLON SRP-770/UPS Bedienungsanleitung

Beliebte Etikettendrucker Handbücher anderer Marken

Brother

Brother P-Touch 2420PC Bedienungsanleitung

newell

newell Dymo LabelManager 210D Bedienungsanleitung

Brother

Brother TD-4000 Bedienungsanleitung

U-Line

U-Line BROTHER H-8754 Bedienungsanleitung

Tharo Systems

Tharo Systems H-435+ Bedienungsanleitung

Brother

Brother E300 Bedienungsanleitung

Godex

Godex RT700 SERIES Bedienungsanleitung

ID Technology

ID Technology 252 Bedienungsanleitung

Labelmate

Labelmate MC-11 Bedienungsanleitung

CAB

CAB XD4M/300 Bedienungsanleitung

Avery Dennison

Avery Dennison Pathfinder 6057 Service-Handbuch

Brother

Brother P-touch PT-9700PC Bedienungsanleitung

TSC

TSC PEX1000 Series Bedienungsanleitung

Adkins

Adkins Label Master Bedienungsanleitung

Epson

Epson LabelWorks LW-400 Bedienungsanleitung

Primera

Primera 510212 Bedienungsanleitung

Brady

Brady BradyPrinter S3100 Bedienungsanleitung

DuraLabel

DuraLabel LabPRO Bedienungsanleitung