P a g e 4 | 8
2. Mode Button
Mode button is used in this device is tactile switches type, user-developed operating
script.
3. Reset Button
The reset button is used to factory reset the device.
Reset procedure: Unplug the Box B01 -> Hold down the reset button -> Plug in the
power -> Continue to hold for about 10 seconds and then release it -> Box will perform a
factory reset and boot up at the Google Setup Wizad screen
4. USB Type C
One port USB Type C 3.1 is available in this device for debug and flashing images.
5. HDMI
One port HDMI 1.4 Type A is available in this device for transmitting images, videos
to external devices such as monitors.
6. Alarm I/O (DI/DO terminal)
Various I/O supports including Alarm-in, Alarm-out (Relay).
1st Alarm input signal line terminal, positive
1st Alarm input signal line terminal, negative (GND)
2nd Alarm input signal line terminal, positive
2nd Alarm input signal line terminal, negative (GND)
1st Alarm output signal line terminal 1
1st Alarm output signal line terminal 2
2nd Alarm output signal line terminal 1
2nd Alarm output signal line terminal 2
Two alarm outputs with NO contacts of IM06GR (TE) relay:
Switching power: 60W/62.5VA
Switching voltage: 220VDC/250VAC
Switching current: 2A
Two alarm inputs can support input voltage level are 5VDC to 12VDC.
