Black & Decker BFTR48W Bedienungsanleitung

INSTRUCTION MANUAL

48"TOWER FAN

Thank you for choosing BLACK+DECKER!

PLEASE READ BEFORE RETURNING THIS PRODUCT FOR

ANY REASON.

If you have a question or experience a problem with your BLACK+DECKER

purchase, go to www.blackanddecker.com/instantanswers

If you can’t find the answer or do not have access to the Internet, call

844-299-0879 from 10:30 a.m. to 6:30 p.m. EST Mon. - Fri. to speak with an

agent. Please have the catalog number available when you call.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

CATALOG NUMBER

BFTR48W

POWER SPEED

TIMER OSCILLATE

M1 M2

POWER SPEED

TIMER OSCILLATE

M1 M2

Page 2

Thank you for purchasing our

BLACK+DECKER product. This

easy-to-use manual will guide you

in getting the best use of your fan.

Remember to record the model and

serial numbers. They are on a label

on the rear.

Staple your receipt to your manual.

You will need it to obtain warranty service.

Model number

Serial number

Date of purchase

PRODUCT REGISTRATION

CONTENTS

SAFETY INFORMATION

Important Safety Instructions......................................................................................................................................... 4-6

Electrical Requirements....................................................................................................................................................... 5

SET UP & USE

Parts & Features........................................................................................................................................................................ 7

Operation & Use ..................................................................................................................................................8-11

Replacing the Fuse................................................................................................................................................12

CLEANING & CARE...............................................................................................................................................12

TROUBLE SHOOTING & WARRANTY

Before You Call For Service ...............................................................................................................................13

Customer Service...................................................................................................................................................13

Troubleshooting......................................................................................................................................................13

Limited Warranty ................................................................................................................................................................... 14

Page 3

Page 4

SAFETY INFORMATION

IMPORTANT SAFETY INSTRUCTIONS

1. READ ALL INSTRUCTIONS BEFORE USE

2. Never insert ﬁngers, pencils, or any other object through the grill

when fan is running

3. Disconnect fan when moving from one location to another.

4. Disconnect fan when not in use and before cleaning.

5. To protect against risk of electrical shock, do not immerse fan in

water or any other liquid.

6. Do not let cord hang over edge of table or counter.

7. Be sure fan is on a stable surface when operating to avoid

overturning.

8. Do not use fan in window. Rain may create electrical hazard.

9. Close supervision is necessary when any appliance is used by or near

children.

10. This product employs overload protection (fuse). A blown fuse

indicates an overload or short-circuit situation. If the fuse blows,

unplug the product from the outlet. Replace the fuse as per the user

manual (follow product marking for proper fuse rating) and check

the product. If the replacement fuse blows, a short-circuit may be

present and the product should be discarded or returned to an

authorized service facility for examination and/or repair.

11. Do not operate any fan with a damaged cord or plug. Discard fan or

return to an authorized service facility for examination and/or repair.

12. Do not run cord under carpeting. Do not cover cord with throw rugs,

runners, or similar coverings. Do not route cord under furniture or

appliances. Arrange cord away from trac area and where it will not

be tripped over.

WARNING

WARNING - Hazards or unsafe

practices which COULD result in

severe personal injury or death

DANGER

DANGER - Immediate hazards

which WILL result in severe

personal injury or death

CAUTION

CAUTION - Hazards or unsafe

practices which COULD result in

minor personal injury

WARNING

When using electrical appliances, basic safety precautions

should be followed, including the following

Page 5

SAFETY INFORMATION

13. To reduce the risk of ﬁre or electric shock, DO NOT use this fan with

any solid state speed control devices.

14. Do not use outdoors.

SAVE THESE INSTRUCTIONS

HOUSEHOLD USE ONLY

ELECTRICAL REQUIREMENTS

This appliance has a polarized plug (one blade is wider than the other). To reduce the

risk of electric shock, this plug is intended to ﬁt into a polarized outlet only one way.

If the plug does not ﬁt into the outlet, reverse the plug. If it still does not ﬁt, contact a

qualiﬁed electrician. Do not attempt to modify the plug in any way.

POWER SUPPLY CORD

1. If the power supply cord is too short, do not use an extension cord. Have a qualiﬁed

electrician or serviceman to install an outlet near the appliance.

2. If it is absolutely necessary to use longer cord sets or an extension cord, extreme

care must be exercised.

a) The marked electrical rating of the cord set or extension cord must equal to or

be greater than the electrical rating of the appliance. The longer cord should be

arranged so that it will not drape over the counter top or table top where it can be

pulled on by children or tripped over unintentionally.

NOTE: Neither BLACK+DECKER nor the dealer can accept any liability for damage

to the product or personal injury resulting from failure to observe the

electrical connection procedures.

Page 6

SAFETY INFORMATION

HANDLING ALKALINE BATTERIES

1. Should ﬂuid from the battery accidentally get into your eyes, there is a threat

of loss of eyesight, do not rub them. Immediately rinse your eyes with clean tap

water and then consult a physician immediately.

2. Do not put the battery in a ﬁre, expose it to heat, dismantle or modify it. If the

insulation or safety valve is damaged, the battery may leak ﬂuid, overheat or

explode.

3. Do not insert the battery with the poles reversed. Doing so may cause some

abnormality or a short and the battery may leak ﬂuid, overheat or explode.

4. Keep the battery out of the reach of children. If the battery is swallowed, contact a

physician immediately.

5. If the alkali ﬂuid gets in your mouth, rinse your mouth with water and contact a

physician immediately.

6. If the alkali ﬂuid gets on your skin or clothes, it may burn your skin, thoroughly

rinse the aected area with tap water.

7. Do not mix new and old batteries or other makes of batteries. The dierent

attributes may cause the battery to leak ﬂuid, overheat or explode.

8. This battery was not made to be recharged. Recharging this battery may damage

the insulation or internal structure and may cause the battery to leak ﬂuid,

overheat or explode.

9. Do not damage or remove the label on the exterior of the battery. Doing so may

cause the battery to short, leak ﬂuid, overheat or explode.

10. Do not drop, throw or expose the battery to extreme impact. Doing so may cause

the battery to leak ﬂuid, overheat or explode.

11. Do not alter the shape of the battery. If the insulation or safety valve is damaged,

the battery may leak ﬂuid, overheat or explode.

12. Immediately remove batteries when they have lost all power. Leaving the batteries

in the unit for a long time may cause the batteries to leak ﬂuid, overheat or

explode due to gas that is generated by the batteries.

13. Cleaning should be limited to external parts only.

Contact your local government for disposal practices in your area.

WARNING

When handling alkaline batteries, basic safety precautions

should be followed, including the following

POWER SPEED

TIMER OSCILLATE

M1 M2

POWER SPEED

TIMER OSCILLATE

M1 M2

Page 7

PARTS & FEATURES

SET UP & USE

Control Display

Fan Body

Pillars

Base

88:88

TIMER

POWER SPEED SLEEP SWING

GENERAL NATURAL

LMH

Remote Control

Round Head Screws for

attaching the fan body to

the pillar x6

Thumb Screws for

attaching base to

pillars x 4

Remote control holder

(on back of unit, not visible)

L Shaped Tool

Round Head Screws for

attaching the front and

rear pillar x6

Rear panel

of main unit

Page 8

SET UP & USE

ASSEMBLY INSTRUCTIONS

1. Pass the power cord through the channel of pillar and ﬁrmly clasp pillar sections

together.

2. Attach the pillars to the fan body, tightening the 6 round head screws provided

with the L shaped tool.

3. Pass the power cord through the central gate and snap wire casing of the base

together.

4. Firmly clamp the front and rear base section together.

5. Align the front of the fan with front base and secure using the 4 thumbscrews.

6. Using the L shaped tool, insert six screws on back side of unit (see illustration in

parts and features section) to secure the front and rear pillars to one another.

7. Make sure the power cord is going through the arch shaped cut out at both the

center of the base and the outer rim of the base. The cord should also be behind

the black plastic barriers located near the rim of the base. (see ﬁg. 3)

NOTE: For additional cord maintenance, remove the two silver screws from the

cord clamp (see ﬁg. 3). Completely lift o the black bar that the screws are

threaded into. In the area of the cord clamp, take the cord and push it in

toward the fan base, making sure it is laying perfectly ﬂat. Place the black bar

back in place over the cord and thread the two silver screws into the holes

molded in the base.

Fig. 1 Fig. 2

Page 9

SET UP & USE

BATTERY INSTRUCTIONS

1. Press down on the battery compartment cover and slide it out. (ﬁg. 4)

2. Insert 2 “AAA” batteries (not included), making sure that the positive terminals are

facing the proper way. (ﬁg. 5)

3. Replace the cover.

BATTERY WARNINGS

1. Do not dispose of batteries in ﬁre, batteries may explode or leak.

2. Do not mix old and new batteries.

3. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)

batteries.

NOTE: Use size “AAA” alkaline batteries. Do not use rechargeable batteries.

Remote Control

Battery Battery Compartment Cover

Fig. 4 Fig. 5

x x

Fig. 3

BOTTOM OF UNIT

Arch Shaped Cutout

Arch Shaped

Cutout

Cord Clamp

Black Plastic

Barriers

Black bar

SET UP & USE

Page 10

OPERATION INSTRUCTIONS

BACKLIT DISPLAY

This product has a backlit display to improve visibility. The backlit display will go on

automatically when you ﬁrst plug in the fan and remain on for about ﬁve seconds

before automatically shutting o. The same thing will happen if you touch any button

on the unit or remote control.

SETTING THE CLOCK

When you ﬁrst plug in your fan, the digital clock will read “12:00”. To set to correct

time, push SPEED button on unit or remote to set the correct hour. Push TIMER

button on unit or remote to set the correct minute. If power is interrupted for any

reason, you will need to manually reset the clock to the correct time.

NOTE: This is a 24 hour time display. For example, if you want to set the clock to 8pm

you need to set the display to read “20:00”.

REMOTE AND CONTROL PANEL

Power Button: Press to start or stop the fan.

Speed Button: Press to select from three speeds: LOW, MEDIUM and HIGH.

Timer Button: Press to set auto shuto timer in 30 minute increments ranging from

30 minutes to 12 hours.

Oscillation Button: Press to start oscillation function. Press again to stop oscillation

function.

M1 Button : Press to activate “NATURAL” wind mode. In Natural wind mode, fan

airﬂow pattern (determined by fan speed) will change randomly to

emulate a natural breeze.

M2 Button : Press to activate “SLEEP” wind mode. In Sleep wind mode, fan airﬂow

pattern will change cyclically every 30 minutes.

If fan is on HIGH fan speed when SLEEP wind is activated, unit will operate in HIGH

rhythm airﬂow pattern for 30 minutes, switch to MEDIUM rhythm airﬂow pattern for

30 minutes and to LOW rhythm airﬂow pattern where it will remain.

If fan is on MEDIUM fan speed when SLEEP wind is activated, unit will operate in

MEDIUM rhythm airﬂow pattern for 30 minutes then switch to LOW rhythm airﬂow

pattern where it will remain.

If fan is on LOW fan speed when SLEEP wind is activated, unit will operate in LOW

rhythm airﬂow pattern where it will remain.

NOTES: All three fan speeds will be reached regardless of whether you are in HIGH,

LOW or MEDIUM rhythm airﬂow patterns. In addition to the NATURAL and

SLEEP wind modes, there is also a GENERAL wind mode which is the

default when you turn on your fan. In the GENERAL wind mode, there will be

constant output airﬂow at the speed you selected.

Inhaltsverzeichnis

Andere Black & Decker Lüfter Handbücher

Black & Decker

Black & Decker BFTU107 Bedienungsanleitung

Black & Decker

Black & Decker BDP-700 Bedienungsanleitung

Black & Decker

Black & Decker FB1620 Bedienungsanleitung

Black & Decker

Black & Decker BDHV-3016 Bedienungsanleitung

Black & Decker

Black & Decker BDHV2002 Montageanleitung

Black & Decker

Black & Decker FW1600 Bedienungsanleitung

Black & Decker

Black & Decker BDHV-1010 Bedienungsanleitung

Black & Decker

Black & Decker Typhoon BDTF1010 Series Montageanleitung

Black & Decker

Black & Decker BDTF-4200R 120V AC 60HZ 55W Bedienungsanleitung

Black & Decker

Black & Decker BXEFT48E Bedienungsanleitung

Black & Decker

Black & Decker BDHS-6120 Bedienungsanleitung

Black & Decker

Black & Decker BDBF-520 Bedienungsanleitung

Black & Decker

Black & Decker BXSH44007GB Bedienungsanleitung

Black & Decker

Black & Decker Typhoon BDDF1200 Series Montageanleitung

Black & Decker

Black & Decker FS1600 Bedienungsanleitung

Black & Decker

Black & Decker BXFD52002GB Bedienungsanleitung

Black & Decker

Black & Decker BDWF7710 Montageanleitung

Black & Decker

Black & Decker BXEFD30E Bedienungsanleitung

Black & Decker

Black & Decker BXFD52003GB Bedienungsanleitung

Black & Decker

Black & Decker FS1600R Bedienungsanleitung

Black & Decker

Black & Decker BCF5201R Bedienungsanleitung

Black & Decker

Black & Decker BXEFP50E Bedienungsanleitung

Black & Decker

Black & Decker Typhoon BDSF1600 series Montageanleitung

Black & Decker

Black & Decker BFSR16 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Hinkley

Hinkley HIGHLAND Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung