Black & Decker Light 'n Easy F495SA Montageanleitung

Light ’n Easy®Iron

with Automatic Shut-Off

1-800-231-9786

QUESTIONS? Please call us TOLL FREE

MODELS F495SA/F499S

SAVE THIS USE AND CARE BOOK

Automatic Shut-Off

Adjustable Steam

ADJUSTABLE

STEAM

When using your iron, basic safety precautions should

always be followed, including the following:

■Read all instructions.

■Use iron only for its intended use.

■To protect against a risk of electric shock, do not

immerse the iron in water or other liquid.

■The iron should always be turned to O/FILL before plug-

ging into or unplugging from an outlet. Never yank cord

to disconnect from outlet; instead grasp plug and pull to

disconnect.

■Do not allow cord to touch hot surfaces. Let iron cool

completely before putting away. Loop cord loosely

around cordwrap when storing.

■Always disconnect iron from electrical outlet when filling

with or emptying of water and when not in use. Be care-

ful to avoid spilling water over iron when filling.

■Do not operate iron with a damaged cord or plug or if the

iron has been dropped or damaged.

■To avoid the risk of electric shock, do not disassemble

the iron; instead, take it to an authorized service center

for examination and repair. Incorrect reassembly can

cause a risk of electric shock when the iron is used.

■Close supervision is necessary for any appliance being

used by or near children. Do not leave iron unattended

while connected or on an ironing board. Always position

iron carefully to prevent it from falling if ironing board is

accidentally moved or cord is pulled. Always use heel

rest.

■Burns can occur from touching hot metal parts, hot

water, or steam. Use caution when you turn a steam iron

upside down — there may be hot water in the water

tank. Avoid rapid movement of iron to minimize hot water

spillage.

■Do not operate in the presence of explosive and/or flam-

mable fumes.

■Do not use iron outdoors.

■This product is for household use only and not for com-

mercial or industrial use.

IMPORTANT SAFEGUARDS

SPECIAL INSTRUCTIONS

■To avoid a circuit overload, do not operate another high-

wattage appliance on the same circuit.

■If an extension cord is necessary, it should be rated not

less than 10 amperes and have Underwriters Laboratories

listing. Cords rated for less amperage may overheat. Care

should be taken to arrange the cord so that it cannot be

pulled on or tripped over.

POLARIZED PLUG This appliance has a polarized

plug—one blade is wider than the

other. To reduce the risk of elec-

tric shock, this plug will fit into a

polarized outlet only one way. If

the plug does not fit fully into the

outlet, reverse it. If it still does not

fit, contact a qualified electrician.

Do not attempt to defeat this safe-

ty feature by modifying the plug in

any way.

TAMPER-RESISTANT This appliance is equipped with a

tamper-resistant screw to prevent

removal of the outer cover. To

reduce the risk of fire or electric

shock, do not attempt to remove

the outer cover. There are no user

serviceable parts inside. Repair

should be done only by authorized

service personnel (see pages 14 &

15 for a list of Black & Decker

Company-Owned Service

Centers).

SAVE THESE INSTRUCTIONS

SCREW

IMPORTANT: Follow this procedure

to clean the iron and to become

familiar with its features before first

use.

1. Remove any labels, stickers,

protective materials, or tags which

may be attached to the body or

soleplate of the iron.

How To Use

PERPARING

THE IRON

1. Water Fill Hole 7. Extended Heel Rest/Cord Wrap

2. Spray Nozzle 8. Water Window

3. Temperature Selector Dial 9. Non-Stick Coated Soleplate

4. Adjustable Steam/Dry Dial 10. Heat Fabric Guide

5. Spray Button 11. Button Groove

6. Centered Cord 12. Push ON Button

AutomaticShut-Off

AdjustableSteam

ADJUSTABLE

STEAM

11 10

2. Fill the Water Tank to the water

full mark (approximately 4 oz.).

(See “Filling With Water,”below )

3. Plug the iron into a standard

(polarized) electrical outlet.

4. Set the Temperature Selector/

Heat Fabric Guide to the Cotton

setting and preheat for about 30

seconds. (See “Starting The Iron,”

page 6)

5. While ironing on an old cotton

terry cloth towel for about two

minutes, try using each of the

iron’s features:

Spray: Pump the SPRAY Button a

few times to see the amount of

water that is released.

Steam Settings: Turn the

Adjustable Steam/Dry Dial to the

Indicator Mark for (light),

(medium), and (heavy) set-

tings to become familiar with the

different amounts of steam at

each setting.

FILLING WITH WATER

NOTE: When filling, be sure the

iron is unplugged, the Temperature

Selector Dial is in the O/FILL posi-

tion, and the Adjustable Steam/Dry

Dial is in the Dry position.

1. Using a clean cup, pour water

into the Water Fill Hole until the

water level reaches the FULL mark

next to the Water Window (Figure

A). Do not overfill. Refill as neces-

sary. Never place the iron directly

under a faucet to add water.

2. Ordinary tap water can gener-

ally be used for ironing. However,

do not use water processed

through a home softening system.

3. In extremely hard water areas,

consider using distilled or dem-

ineralized water. If using distilled

or demineralized water, tap water

should be used the first time you

use the iron and once per month

thereafter to maintain steam per-

formance.

STARTING THE IRON

1. Be sure the iron is filled with

water. Plug in the iron.

2. Press the PUSH ON Button in to

start the iron. (Figure B).

Figure A

NOTE: The PUSH ON

Button will normally

remain pushed in. It will

pop out only if the iron

shuts itself off automati-

cally.

3. Use the Heat Fabric Guide

(Numbered 1 thru 7) on the body of

the iron to select the setting for

the fabric to be ironed. (Also, see

“Fabric Ironing Chart”on page 9 ).

4. Turn the Temperature Selector

Dial to the appropriate setting and

allow to preheat for approximately

2 minutes.

5. To iron with steam, turn the

Adjustable Steam/Dry Dial to the

(light), (medium), or

(heavy) steam setting as indicated

next to the Heat Fabric

Guide on the body of the

iron (Figure C). IMPOR-

TANT: the Temperature

Selector Dial must be in

the steam area (settings

4 thru 7) to generate

steam. If water spotting

occurs, reduce the

steam level and/or

Figure B

ACETATE

ACRYLIC

NYLON

SILK

WOOL

TEMP FABRIC

POL

YESTER

YON

BLENDSOF

COTTON

SPRAY • SILVERSTONE • IR

FUL

O/FILL

Figure C

increase the heat set-

ting slightly on the

Temperature Selector

Dial.

6. For spray, simply

pump the spray button

at the top of the iron to

get a water mist from

the spray nozzle. Spray

can be used at any tem-

perature setting

whether steam or dry

ironing.

7. To iron without steam, turn the

Adjustable Steam/Dry Dial to the

Indicator Mark for DRY. (Figure D)

ABOUT THE AUTO-OFF FEATURE

1. This iron will shut off automati-

cally after one hour whether or not

it is in use.

2. The PUSH ON Button will pop

out only if the iron shuts off auto-

matically after an hour.

3. If the PUSH ON Button pops out

while you are ironing, then one

hour has elapsed since the iron

was plugged in. Simply press the

PUSH ON Button back in to

continue ironing.

Figure D

•

Adjustable

Steam

NOTE: Turning the Temperature

Selector to O/FILL will not shut off

the iron. That simply shuts off the

heat. If you have ironed for less

than an hour and the PUSH ON

Button remains pushed in, unplug

the cord from the outlet to ensure

the iron is off. Otherwise, the iron

will shut off automatically after it

has been plugged in for an hour.

TURNING THE IRON OFF

To manually turn the iron off, turn

the Temperature Selector Dial to

O/FILL and unplug the cord from

the outlet. You cannot manually

pop out the PUSH ON Button.

STORING THE IRON

1. Turn the Adjustable Steam/Dry

Dial to DRY.

2. Turn the Temperature Selector

Dial to O/FILL.

3. Unplug the iron.

4. Allow the iron to cool and wrap

the cord around the body of the

iron and extended heel rest.

5. It is not necessary to empty the

water if the iron is used more than

once a week.

6. Store the iron on its heel rest

to prevent water from leaking

from the Soleplate.

Refer to this chart for recommend-

ed Temperature and Steam Settings

and ironing instructions for various

fabrics. Always read garment labels

and follow manufacturer’s ironing

instructions.

FABRIC IRONING

CHART

FABRIC ADJUSTABLE STEAM TEMP. IRONING INSTRUCTIONS

ACRYLIC

ACETATE

NYLON

SILK

POLYESTER

SOME

RAYONS

PERM. PRESS

COTTON

BLENDS

WOOL

COTTON

LINEN

Dry iron on wrong side. Press

washables while damp.

Dry iron on wrong side to prevent

shine. Press washables while

damp.

Dry iron washables while fabric

is damp. Iron rayon fabrics on the

wrong side. Steam iron if fabric

manufacturer directs.

Check care label and follow the

manufacturer's instructions for

blends: use the setting for the

fiber requiring the lowest heat.

Steam iron on wrong side to pre-

vent shine, or use a press cloth on

right side. Do not press complete-

ly dry.

Dry iron washables while damp.

Use steam as needed. Iron dark

fabrics on wrong side to avoid

shine.

Dry iron washables while damp

and until dry. Use steam as need-

ed. Iron dark linens on wrong side

to avoid shine.

DRY IRON

AT ANY

SETTING

LIGHT

REGULAR

HEAVY

NOTE: Use SPRAY at any temperature setting.

STEAM should only be used in the steam area

(Settings 4 thru 7) of the Temperature Selector Dial.

Water spotting may occur if the setting is too low.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black & Decker Eisen Handbücher

Black & Decker

Black & Decker STEAMADVANTAGE IR1070S Bedienungsanleitung

Black & Decker

Black & Decker AvantSteam AS700 Series Montageanleitung

Black & Decker

Black & Decker Quickpress AS70 Series Montageanleitung

Black & Decker

Black & Decker X2210 Bedienungsanleitung

Black & Decker

Black & Decker Digital Edge D1690 Montageanleitung

Black & Decker

Black & Decker AvantSteam AS385 Montageanleitung

Black & Decker

Black & Decker ProFinish X800 Series Montageanleitung

Black & Decker

Black & Decker First Impressions ICR200 Series Montageanleitung

Black & Decker

Black & Decker Powerful Solutions BR925L Bedienungsanleitung

Black & Decker

Black & Decker Elite Digital Pro Series Bedienungsanleitung

Black & Decker

Black & Decker First Impressions AS900 Series Montageanleitung

Black & Decker

Black & Decker X1050 Bedienungsanleitung

Black & Decker

Black & Decker ALLURE D3030 Bedienungsanleitung

Black & Decker

Black & Decker Quickpress AS70 Series Bedienungsanleitung

Black & Decker

Black & Decker IMPACT IR3001 Bedienungsanleitung

Black & Decker

Black & Decker D2030 Bedienungsanleitung

Black & Decker

Black & Decker ALL-TEMP STEAM D6000 Montageanleitung

Black & Decker

Black & Decker X1030 Bedienungsanleitung

Black & Decker

Black & Decker ICR05X Bedienungsanleitung

Black & Decker

Black & Decker X1015 Bedienungsanleitung

Black & Decker

Black & Decker TR200TI Bedienungsanleitung

Black & Decker

Black & Decker X50 Bedienungsanleitung

Black & Decker

Black & Decker PI8000 Montageanleitung

Black & Decker

Black & Decker The Classic F63D Series Montageanleitung

Beliebte Eisen Handbücher anderer Marken

Clatronic

Clatronic DB 3703 Bedienungsanleitung

TEFAL

TEFAL FV4093Z0 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 BS Bedienungsanleitung

Bosch

Bosch 2 Series Bedienungsanleitung

Riffel

Riffel Catena KB-819 Bedienungsanleitung

Texi

Texi Hestia Bedienungsanleitung

Maxwell

Maxwell MW-3010 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi ST60 Bedienungsanleitung

Primula

Primula Vapormat Bedienungsanleitung

Magio

Magio MG-541 Bedienungsanleitung

Bosch

Bosch Sensixx B22L Bedienungsanleitung

Philips

Philips GC651 Bedienungsanleitung

Vitek

Vitek VT-1247 VT Bedienungsanleitung

Cleanmaxx

Cleanmaxx 3397 Bedienungsanleitung

Philips

Philips GC800 Bedienungsanleitung

dyras

dyras ESI-2400AC Bedienungsanleitung

Philips

Philips PerfectCare PSG71 Series Bedienungsanleitung

GE 169061 Bedienungsanleitung