Black & Decker X750R Bedienungsanleitung

X750R

X810R

www.blackanddecker.ae

ENGLISH

Parts Identiﬁcation

1. Spray button

2. Steam control dial

3. Steam burst button

4. Temperature control dial

5. Heating light

6. Heel rest

7. Self-clean button

8. Cord storage

9. Maximum ﬁlling level indicator

10.Water tank

11.Soleplate

12. Water tank cover

13.Spray nozzle

1 2 3 4 5 6

1213

ENGLISH

Intended use

Your Black & Decker iron has been designed for

ironing garments made of linen, cotton, silk,

wool and synthetic materials. This product is

intended for household use only.

Safety instructions

Warning! When using mains-powered

appliances, basic safety precautions, including

the following, should always be followed to

reduce the risk of ﬁre, electric shock, personal

injury and material damage.

Read all of this manual carefully before using

the appliance.

• The intended use is described in this manual.

The use of any accessory or attachment or

the performance of any operation with this

appliance other than those recommended in

this instruction manual may present a risk of

personal injury.

• Retain this manual for future reference.

Using your appliance

• Make sure that the appliance is switched off

before connecting to or disconnecting from

the power supply.

• Always take care when using the appliance.

• Do not use the appliance outdoors.

• Never pull the power supply cord to

disconnect the plug from the socket. Keep

the power supply cord away from heat, oil

and sharp edges.

• If the power supply cord is damaged during

use, disconnect the appliance from the

power supply immediately. Do not touch the

power supply cord before disconnecting from

the power supply.

• Disconnect the appliance from the power

supply when not in use, before ﬁtting or

removing parts and before cleaning.

Safety of others

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been give supervision or instruction

concerning use of the appliance by a person

responsible for their safety.

• Children must be supervised to ensure that

they do not play with the appliance.

After use

• Switch off and remove the plug from the

socket before leaving the appliance

unattended and before changing, cleaning or

inspecting any parts of the appliance.

• When not in use, the appliance should be

stored in a dry place. Children should not

have access to stored appliances.

Inspection and repairs

• Before use, check the appliance for damaged

or defective parts. Check for breakage of

parts, damage to switches and any other

conditions that may affect its operation.

• Do not use the appliance if any part is

damaged or defective.

• Have any damaged or defective parts

repaired or replaced by an authorised repair

agent.

ENGLISH

• Before use, check the power supply cord for

signs of damage, ageing and wear.

• Do not use the appliance if the power supply

cord or mains plug is damaged or defective.

• If the power supply cord or mains plug is

damaged or defective it must be repaired by

an authorised repair agent in order to avoid a

hazard. Do not cut the power supply cord

and do not attempt to repair it yourself.

• Never attempt to remove or replace any

parts other than those speciﬁed in this

manual.

Electrical Safety

This product must be earthed. Always

check that the power supply

corresponds to the voltage on the rating plate.

Power plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (Class 1) appliances.

Unmodiﬁed plugs and matching outlets will

reduce the risk of electric shock.

• To avoid risk of electric shock, do not

immerse the cord, plug or motor unit in water

or other liquid.

• Check that the supply voltage shown on the

rating plate of the appliance matches that of

your electrical system. Any connection error

will invalidate the guarantee.

Extension cables and Class I

product

A 3 core cable must be used as your

appliance is earthed and of Class I

construction. Up to 30m (100 ft) can be used

without loss of power.

Mains plug replacement

If a new mains plug needs to be ﬁtted:

• Safely dispose of the old plug

• Connect the brown lead to the live terminal of

the new plug

• Connect the blue lead to the neutral terminal

• If the product is class I (earthed), connect the

green/yellow lead to the earth terminal.

Note: If your product is class II double insulated

(only 2 wires in the cord set), no connection is to

be made to the earth terminal.

Follow the ﬁtting instructions supplied with good

quality plugs

Any replacement fuse must be of the same

rating as the original fuse supplied with the

product.

Warning! The above section on mains plug

replacement is for authorized service centre

personals.

Additional safety instructions

for irons

• Always route the cord carefully to avoid a

tripping hazard.

• Do not use the appliance near water.

• Do not place the appliance near heat sources

or directly under cabinets. Do not use the

appliance in the presence of explosive or

ﬂammable materials.

• The ﬁlling apperture must not be opened

during use.

ENGLISH

• Steam may escape from the soleplate.

• Surfaces may be hot during use and during

the cooldown period.

• Set the temperature control dial to the min

position before plugging in or out.

• Let the appliance cool down before leaving it

unattended and before cleaning or inspecting

any parts of the appliance.

• The power supply cord should not touch the

hot soleplate during use or during the cool

down period.

• Do not touch the soleplate until it has cooled

down.

• Wait until the appliance has cooled down

before emptying the water tank as the water

may still be hot.

• Always diconnect the appliance from the

supply before ﬁlling, emptying, cleaning, or

carying out any maintenance on the

appliance.

• The iron must be used and rested on a

stable surface

• The iron is not to be used if it has been

dropped, if there are visible signs of damage

or if it is leaking

Before ﬁrst use

Cleaning the soleplate

• Make sure that the appliance is unplugged.

• Fill the appliance with water as described

below.

• Use the self-clean system as described

below. When ﬁnished, wipe the soleplate and

steam vents with a cloth.

Some parts of the appliance have been lightly

greased and as a result the appliance may

smoke slightly when switched on for the ﬁrst

time. This will cease after a short while.

Assembly

Warning! Before assembly, make sure that the

appliance is switched off and unplugged.

Filling the water tank (Fig. B)

In order to be able to use the steam function or

the spray feature, you will ﬁrst need to ﬁll the

water tank with water.

• Make sure that the appliance is unplugged.

• Open the water tank cover (12).

• Hold the appliance at an angle as shown.

• Fill the appliance with water using the beaker

provided.

• Close the water tank cover.

Warning! Never ﬁll above the maximum ﬁlling

level (9). Normal tap water can be used, but if

you live in a hard water area the use of distilled

water is recommended.

• Do not use chemically descaled water.

Use

Warning! Do not leave the appliance

unattended while it is connected to the power

supply and during the cool down period.

ENGLISH

Temperature setting

The required temperature setting depends on

the garment fabric.

• Adjust the temperature control dial (4) to the

required setting:

1 Silk / Nylon

2 Acctate / Acrylic

3 Polyester / Rayan

4 Cotton / Blends

5 Wool

6 Cotton

7 Linen

• If you are unsure of the ﬁbre content of a

garment, start with a low temperature setting

and test on a small area (seam or inside

hem). If wrinkles remain, gradually increase

the heat setting until you ﬁnd the optimum

setting.

Using as a dry iron

• Stand the appliance on its heel rest (6).

• Plug the appliance in and switch on.

• Set the steam control dial (2) to the 'O'

position.

• Adjust the temperature control dial (4) to the

required setting.

The heating light (5) will switch off when the

appliance has reached the required

temperature.

Using as a steam iron

• Fill the water tank as described above.

• Stand the appliance on its heel rest (6).

• Plug the appliance in and switch on.

• Adjust the temperature control dial (4) to the

required steam setting.

The heating light (5) will switch on. When the

heating light switches off, the iron will be ready

for use as a steam iron. The heating light will

regularly switch on and off whilst ironing.

• To create steam, set the steam control dial

(2) to the required steam position.

Using the steam burst button

The steam burst feature can only be used whilst

ironing on a high temperature setting.

• Make sure that there is water in the tank and

the temperature control dial (4) is set to the

steam position.

• Lift the appliance and press the steam burst

button (3). You may need to press a few

times to activate the pump.

Using the spray button

The spray feature can be used at any

temperature setting when either steam or dry

ironing.

• Make sure that there is water in the tank.

• Press the button (1) several times to activate

the pump while you are ironing.

Using the self-clean button

The self-clean function must be used before

using the appliance for the ﬁrst time and then

regularly to remove scale.

• Fill the tank (10) to the maximum ﬁlling level

(9).

• Set the temperature control dial (4) to the

max position.

• Plug the appliance in and switch on.

• Allow the appliance to heat up until the

heating light (5) switches off and then on

again.

• Unplug the appliance and hold it horizontally

over the sink.

• Press the self-clean button (7).

Hot water and steam will come out of the vents.

Impurities and scale will be washed away.

• Move the iron backwards and forwards while

this is happening.

• Release the self-clean button.

• Stand the appliance upright on its heel.

• Plug the appliance in and switch on.

• Iron an old cloth or towel to dry the soleplate.

Hints for optimum use

• Sort the articles to be ironed according to the

fabric. Start ironing with the fabrics requiring

the lowest heat setting.

• The appliance can be used as a dry iron

even if there is water in the tank. Do not ﬁll

the tank with water if the appliance is to be

used as a dry iron for an extended period.

• Avoid ironing over zippers, rivets on jeans

etc. as they will scratch the soleplate.

Cleaning and storage

Warning! Before cleaning and storing, unplug

the appliance and allow it to cool down.

• Pour out any remaining water after each use

by tilting the appliance forward.

• Clean the body with a soft damp cloth.

• Wipe scale and other residues off the

soleplate with a damp cloth.

• Store in an upright position. The cord can be

wound around the cord storage (8).

Technical Data

ENGLISH

X750R X810R

Voltage 220-240V 220-240V

Frequency 50/60Hz 50/60Hz

Rated Power 1450-1750W 1600-2000W

ENGLISH

Protecting the environment

Separate collection. This product must not

be disposed of with normal household

waste.

Should you ﬁnd one day that your Black &

Decker product needs replacement, or if it is of

no further use to you, do not dispose of it with

other household waste. Make this product

available for separate collection.

• Black & Decker provides a facility for

recycling Black & Decker products once they

have reached the end of their working life.

This service is provided free of charge. To

take advantage of this service please return

your product to any authorised repair agent

who will collect them on our behalf.

• You can check the location of your nearest

authorised repair agent by contacting your

local Black & Decker ofﬁce at the address

indicated in this manual. Alternatively, a list of

authorized Black & Decker repair agents and

full details of our after-sales service and

contact are available on the Internet at:

www.2helpU.com.

Warranty

Black & Decker is conﬁdent of the quality of its

products and offers an outstanding warranty.

This warranty statement is in addition to and in

no way prejudices your statutory rights.

The warranty is valid within the territories of the

Member States of the European Union and the

European Free Trade Area.

If a Black & Decker product becomes defective

due to faulty materials, workmanship or lack of

conformity, within 24 months from the date of

purchase, Black & Decker warranty to replace

defective parts, repair products subjected to fair

wear and tear or replace such products to ensure

minimum inconvenience to the customer unless:

The product has been used for trade,

professional or hire purposes;

The product has been subjected to misuse

or neglect;

The product has sustained damage

through foreign objects, substances or

accidents;

Repairs have been attempted by persons

other than authorised repair agents or

Black & Decker service staff.

To claim on the warranty, you will need to submit

proof of purchase to the seller or an authorised

repair agent. You can check the location of your

nearest authorised repair agent by contacting

your local Black & Decker ofﬁce at the address

indicated in this manual.

Alternatively, a list of authorised Black & Decker

repair agents and full details of our after-sales

service and contacts are available on the Internet

at: www.2helpU.com.

FRANÇAIS

Identiﬁcation des pièces

1. Touche spray

2. Variateur de vapeur

3. Touche jet de vapeur

4. Cadran de réglage de la température

5. Voyant de température

6. Talon d’appui

7. Touche auto-nettoyage

8. Espace de rangement du cordon

9. Repère de remplissage maximum

10. Réservoir d’eau

11. Semelle de repassage

12. Dispositif de fermeture du réservoir d’eau

13. Gicleur

1 2 3 4 5 6

1213

FRANÇAIS

Utilisation prévue

Votre fer à repasser Black & Decker a été conçu

pour repasser des vêtements en lin, en coton,

en soie, en laine et en synthétique. Cet appareil

est uniquement destiné à un usage domestique.

Consignes de sécurité

Avertissement! Lorsqu’on utilise un appareil

électrique, il faut toujours respecter certaines

règles de sécurité fondamentales, notamment

les suivantes, aﬁn de prévenir les risques

d’incendie, de décharges électriques, de

blessures corporelles et de dommages

matériels.

Lire ce manuel attentivement avant d’utiliser

l’appareil.

• Ce manuel décrit la manière d’utiliser cet

appareil. L’utilisation d’un accessoire ou

d’une ﬁxation, ou l’utilisation de cet appareil

à d’autres ﬁns que celles recommandées

dans ce manuel d’instruction peut présenter

un risque de blessures corporelles.

• Conservez ce manuel pour un usage

ultérieur.

Utilisation de votre appareil

• S’assurer que l’appareil est éteint avant de le

brancher ou de le débrancher de

l’alimentation secteur.

• Prendre toutes les précautions nécessaires

pendant l’utilisation de l’appareil.

• Ne pas utiliser cet appareil à l’extérieur.

• Ne jamais tirer sur le cordon d’alimentation

pour débrancher la ﬁche de la prise. Gardez

le cordon d’alimentation éloigné de toute

source de chaleur, de zones graisseuses et

de bords tranchants.

• Si le cordon d’alimentation est endommagé

pendant l’utilisation, débrancher

immédiatement l’appareil. Ne pas toucher au

cordon d’alimentation avant d’avoir

débranché l’appareil.

• Débrancher l’appareil de l’alimentation

secteur lorsqu’il n’est pas utilisé, avant de

monter ou de démonter des éléments et

avant de le nettoyer.

Sécurité d’autrui

• Cet appareil ne doit pas être utilisé par des

personnes (y compris les enfants) ayant des

déﬁciences physiques, sensorielles ou

mentales. Cette consigne s’applique aussi

aux personnes manquant d’expérience ou de

connaissances du matériel, à moins que

celles-ci n’aient reçu les instructions

appropriées ou ne soient encadrées par une

personne responsable de leur sécurité pour

utiliser l’appareil.

• Ne jamais laisser les enfants sans

surveillance pour éviter qu’ils ne jouent avec

cet appareil.

Après utilisation

• Eteindre et retirer la ﬁche de la prise avant de

laisser l’appareil sans surveillance et avant de

changer, nettoyer ou inspecter les éléments

de l’appareil.

• Lorsque l’appareil n’est pas utilisé, le ranger

dans un endroit sec. Les enfants ne doivent

pas avoir accès aux appareils rangés.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Black & Decker Eisen Handbücher

Black & Decker

Black & Decker Steam Xpress AS255 Montageanleitung

Black & Decker

Black & Decker X810 Bedienungsanleitung

Black & Decker

Black & Decker Press'n Dress AS800 Series Montageanleitung

Black & Decker

Black & Decker SG100 Series Bedienungsanleitung

Black & Decker

Black & Decker STEAMADVANTAGE IR1070S Bedienungsanleitung

Black & Decker

Black & Decker BXIR1000E Bedienungsanleitung

Black & Decker

Black & Decker SteamAdvantage F2000 Montageanleitung

Black & Decker

Black & Decker D2000 Series Montageanleitung

Black & Decker

Black & Decker Light 'N Easy F950 Bedienungsanleitung

Black & Decker

Black & Decker TR200TI Bedienungsanleitung

Black & Decker

Black & Decker BXSS2400E Bedienungsanleitung

Black & Decker

Black & Decker IR0175W Montageanleitung

Black & Decker

Black & Decker F210 Montageanleitung

Black & Decker

Black & Decker IR1160S Montageanleitung

Black & Decker

Black & Decker Quickpress AS70 Series Bedienungsanleitung

Black & Decker

Black & Decker IR04VC Bedienungsanleitung

Black & Decker

Black & Decker ALL-TEMP STEAM DIGITAL D6100C Montageanleitung

Black & Decker

Black & Decker SteamXpress AS675 Montageanleitung

Black & Decker

Black & Decker Press&Steam HGS500 Bedienungsanleitung

Black & Decker

Black & Decker Digital Evolution D5000 Montageanleitung

Black & Decker

Black & Decker F200 Bedienungsanleitung

Black & Decker

Black & Decker Quick 'N Easy IM310 Montageanleitung

Black & Decker

Black & Decker AvantSTEAM AS430 Bedienungsanleitung

Black & Decker

Black & Decker Classic 4-7-50e Montageanleitung

Beliebte Eisen Handbücher anderer Marken

Clatronic

Clatronic DB 3703 Bedienungsanleitung

TEFAL

TEFAL FV4093Z0 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 BS Bedienungsanleitung

Bosch

Bosch 2 Series Bedienungsanleitung

Riffel

Riffel Catena KB-819 Bedienungsanleitung

Texi

Texi Hestia Bedienungsanleitung

Maxwell

Maxwell MW-3010 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi ST60 Bedienungsanleitung

Primula

Primula Vapormat Bedienungsanleitung

Magio

Magio MG-541 Bedienungsanleitung

Bosch

Bosch Sensixx B22L Bedienungsanleitung

Philips

Philips GC651 Bedienungsanleitung

Vitek

Vitek VT-1247 VT Bedienungsanleitung

Cleanmaxx

Cleanmaxx 3397 Bedienungsanleitung

Philips

Philips GC800 Bedienungsanleitung

dyras

dyras ESI-2400AC Bedienungsanleitung

Philips

Philips PerfectCare PSG71 Series Bedienungsanleitung

GE 169061 Bedienungsanleitung