Black Box JPM110A-R2 Bedienungsanleitung

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746

JUNE 1997

JPM110A-R2 JPM111A-R2

JPM112A-R2 JPM113A-R2

JPM114A-R2 JPM115A-R2

JPM116A-R2 JPM117A-R2

JPM118A-R2 JPM119A-R2

JPM120A JPM121A

Black Cat CAT5 Patch Panels

CUSTOMER SUPPORT INFORMATION

1 2 3 4 5 6 7 8 910 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Black Cat 5A

1 2 3 4 5 6 7 8 910 11 12 13 14 15 16

BlackCat 5B

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

BLACK CAT CAT5 PATCH PANELS

Contents

Chapter Page

1. Specifications ............................................................ 3

2. Introduction ............................................................. 5

3. Installation ............................................................. 6

3.1 The Complete Package ................................... 6

3.2 Rackmounting the Patch Panel ...................... 7

3.3 Rackmounting the Cable Guide (Optional) ... 8

3.4 Wiring the Patch Panel ................................... 8

3.5 Organizing the Cables (Optional) ................ 12

4. Troubleshooting ................................................... 13

4.1 Contacting Black Box ................................... 13

4.2 Shipping and Packaging ............................... 14

CHAPTER 1: Specifications

Compliance —

JPM110A-R2 through JPM114A-R2

and JPM120A: EIA/TIA-568B;

JPM115A-R2 through JPM119A-R2

and JPM121A: EIA/TIA-568A

Connectors —

Equal numbers of front-mounted

RJ-45 female and rear-mounted

Type 110 female:

JPM110A-R2, JPM115A-R2: 16;

JPM111A-R2, JPM116A-R2: 24;

JPM112A-R2, JPM117A-R2: 32;

JPM113A-R2, JPM118A-R2: 48;

JPM120A, JPM121A: 64;

JPM114A-R2, JPM119A-R2: 96

Material —

Rolled-edge anodized aluminum

Size —

JPM110A-R2, JPM111A-R2,

JPM115A-R2, and JPM116A-R2:

1.8" (1U) H x 19"W x 1.6"D

(4.6 x 48.3 x 4.1 cm);

JPM112A-R2, JPM113A-R2,

JPM117A-R2, and JPM118A-R2:

3.5" (2U) H x 19"W x 1.6"D

(8.9 x 48.3 x 4.1 cm);

JPM114A-R2, JPM119A-R2,

JPM120A, and JPM121A:

7" (4U) H x 19"W x 1.6"D

(17.8 x 48.3 x 4.1 cm)

1. Specifications

BLACK CAT CAT5 PATCH PANELS

Weight —

JPM110A-R2, JPM115A-R2:

Net: 0.7 lb. (0.3 kg);

Shipping: 1.6 lb. (0.7 kg);

JPM111A-R2, JPM116A-R2:

Net: 0.8 lb. (0.4 kg);

Shipping: 1.8 lb. (0.8 kg);

JPM112A-R2, JPM117A-R2:

Net: 1.3 lb. (0.6 kg);

Shipping: 2.7 lb. (1.2 kg);

JPM113A-R2, JPM118A-R2:

Net: 1.6 lb. (0.7 kg);

Shipping: 3 lb. (1.4 kg);

JPM120A, JPM121A:

Net: 2.4 lb. (1.1 kg);

Shipping: 5 lb. (2.3 kg);

JPM114A-R2, JPM119A-R2:

Net: 3.1 lb. (1.4 kg);

Shipping: 5.8 lb. (2.6 kg)

CHAPTER 2: Introduction

The Black Cat CAT5 Patch Panels are designed to be

high-performance mainstays of wiring sites for Category 5:

rugged enough for everyday handling in demanding

locations and applications, yet simple and convenient

enough for anyone to work with. Some of their more

important features include:

•A lot of ports in not a lot of surface area. Get 16 or

24 ports on a Panel one rack unit (1U) high, 32 or

48 ports on a Panel 2U high, or 64 or 96 ports on a

Panel 4U high.

•A higher printed-circuit-board capacity than most

other patch panels, which makes the Black Cats

more reliable at Category 5 data rates.

•

Sturdy rolled-edge anodized-aluminum construction.

•Type 110 connectors on the back of the Panel that

don’t protrude—so they don’t snag cables—and

that are specially arranged so that you can punch

cables in a pair-by-pair sequence, preserving pair

twist to within a half-inch (12.7 mm) of the

connectors, as required by EIA/TIA-568.

•Come with a rackmountable Cable Management

Bar, sets of cable ties and Type 110 connector caps,

a sheet of label-paper strips and two adhesive-

backed plastic sheaths.

2. Introduction

BLACK CAT CAT5 PATCH PANELS

3.1 The Complete Package

Before you install the Black Cat CAT5 Patch Panel, make

sure you received everything that should come with it:

•The Black Cat CAT5 Patch Panel itself.

•One or more bags containing enough Type 110

connector caps to protect the 110 (rear) side of all

of the Panel’s connectors.

•A bag containing two or four 10/32" screw-and-

washer pairs that can be used to rackmount the Panel.

•Cable ties.

•A Cable Management Bar (CMB) that can be

rackmounted above or below the Panel.

•Two 10/32" screw-and-washer pairs that can be

used to rackmount the CMB.

•A small sheet of perforated strips of heavy paper

that can be used to make cable-identification labels.

•Two adhesive-backed plastic sheaths that can be

stuck to the Panel or the CMB to hold and protect

cable-identification labels.

If you didn’t receive something, or if anything arrived

damaged, call Black Box at (724) 746-5500 right away.

3. Installation

CHAPTER 3: Installation

3.2 Rackmounting the Patch Panel

To install the Black Cat CAT5 Patch Panel in a rack, hold

the Panel so that at least two of the mounting holes in its

“ears” are positioned over mounting holes in the side

rails of your rack.

If the rack’s mounting holes are not threaded, or are

pre-threaded for screws with a diameter of 10/32", you

can use the screws and washers that we include with the

Panel to mount the Panel on the rack. (The two screws

and two washers we included are sufficient to hold the

Panel on; one screw and washer can go in either

mounting hole on one side of the rack, and the other

screw and washer can go in either hole on the other side

of the rack. If you have two more 10/32" screws and

washers and want to use them in the other two holes, feel

free.)

If the rack is pre-threaded for screws of a different

width, you will have to use your own screws to mount the

Panel.

Place the washers on the screws, push them through

the Panel’s mounting holes, and push or screw them

through the rack’s mounting holes. (If your rack is not

pre-threaded, you will need “cage nuts” or “spring nuts”

of the appropriate width—10/32" for the screws we

provide—to secure these screws from the other side of

the rack. If your rack

pre-threaded, you could use

regular nuts to secure the screws, but they will probably

stay in place without requiring nuts.)

BLACK CAT CAT5 PATCH PANELS

3.3 Rackmounting the Cable Management Bar (Optional)

If you like, you can also rackmount the Cable Management

Bar, an optional companion piece to the Black Cat CAT5

Patch Panel. (The Bar holds hardwired cables in place, in

groups of as many as eight cables.)

Hold the Bar so that the “eyes” of its mounting hooks

are positioned over mounting holes in the side rails of

your rack above or below those you used to mount the

Panel itself.

If the rack’s mounting holes are not threaded, or are

pre-threaded for screws with a diameter of 10/32", you

can use the two screws and washers that we include with

the Bar to mount the Bar on the rack. (If the rack is pre-

threaded for screws of a different width, you will have to

use your own screws to mount the Bar.)

Place the washers on the screws, push them through

the eyes of the Bar’s mounting hooks, and push or screw

them through the rack’s mounting holes. (If your rack is

not pre-threaded, you will need “cage nuts” or “spring

nuts” of the appropriate width—10/32" for the screws we

provide—to secure these screws from the other side of

the rack. If your rack

pre-threaded, you could use

regular nuts to secure the screws, but they will probably

stay in place without requiring nuts.)

CHAPTER 3: Installation

3.4 Wiring the Patch Panel

CAUTION!

The Black Cat CAT5 Patch Panel is intended to be

employed on the protected side of a listed primary

telephone protector. Wiring it in such a way that it is not

protected by a listed primary telephone protector could lead

to the damaging or destruction of the Panel, your site’s

Category 5 wiring, all devices connected to your site’s

Category 5 wiring, all devices electrically connected to

those devices, and your site’s electrical system.

To hardwire (permanently attach) a Category 5 cable to

the Black Cat CAT5 Patch Panel, take these steps:

1. It’s very important that you plan your wiring

scheme ahead of time. Laying out which cables you

want to attach to which ports, and how you want to

group and organize your cables (with the included

cable ties and/or cable guide, or whatever), will save

time and effort and prevent rewiring headaches.

2. If you are using the optional Cable Management

Bar, thread the end of the cable through the

desired hole in the desired cable-group bracket on

the Bar.

3. Remove the outer jacket from the end of the cable.

We do not recommend removing the jacket from

more than the last half-inch or so of the cable. Do

not strip the insulation from any of the individual

wires. The wires in the cable must not be thicker

than 22 AWG or thinner than 26 AWG.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Kabel und Steckverbinder Handbücher

Black Box

Black Box V.11 LS Bedienungsanleitung

Black Box

Black Box AC156A-8 Bedienungsanleitung

Black Box

Black Box AC043A Bedienungsanleitung

Black Box

Black Box VSP-HDMI1X2-4K Bedienungsanleitung

Black Box

Black Box MT120A-R2 Bedienungsanleitung

Black Box

Black Box DRD-4 Bedienungsanleitung

Black Box

Black Box TL576A Bedienungsanleitung

Black Box

Black Box TS220A-R2 Bedienungsanleitung

Black Box

Black Box CAT6a Bedienungsanleitung

Black Box

Black Box MD940A-F Bedienungsanleitung

Black Box

Black Box PC to Printer Cables Bedienungsanleitung

Black Box

Black Box Bulk Fiber Optic Cable Bedienungsanleitung

Black Box

Black Box Mini Driver MP Bedienungsanleitung

Black Box

Black Box Terminated Multimode Fiber Optic Cable Bedienungsanleitung

Black Box

Black Box EXN37215 Bedienungsanleitung

Black Box

Black Box AC3010A Bedienungsanleitung

Black Box

Black Box AC074A-R3 Bedienungsanleitung

Black Box

Black Box CAT5 Shielded Twisted Pair (STP) Patch Cable Bedienungsanleitung

Black Box

Black Box GigaTrue CAT6 JPM610A-R8 Bedienungsanleitung

Black Box

Black Box EFN06-24 Bedienungsanleitung

Black Box

Black Box MT243A Bedienungsanleitung

Black Box

Black Box TL421A Bedienungsanleitung

Black Box

Black Box DVI Cables Bedienungsanleitung

Black Box

Black Box Fiber Optic Bulk Cable Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

CYP

CYP PU-1H3HBTL Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung