Black Box 4KDPKVMXT-100M-R2 Bedienungsanleitung

24/7 TECHNICAL SUPPORT AT 1.877.877.2269 OR VISIT BLACKBOX.COM

4K DP 1.2

KVM

EXTENDER

USER MANUAL

4KDPKVMXT-100M-R2

HDBT Out

DC 12V RS232

Tx Rx G

DP In Audio In Audio Out

Copy 4k@30Hz

EDID USB Host

HDBT In

DC 12V RS232

Tx Rx G

DP Out Audio In Audio OutUSB Device

TABLE OF CONTENTS

NEED HELP?

LE AVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1. 8 7 7. 87 7. 2 2 6 9

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

SAFETY INSTRUCTIONS .................................................................................................................................................................. 3

1. SPECIFICATIONS........................................................................................................................................................................... 4

2. OVERVIEW...................................................................................................................................................................................... 6

2.1 Introduction...............................................................................................................................................................................................6

2.2 Features ....................................................................................................................................................................................................6

2.3 What’s Included........................................................................................................................................................................................6

2.4 Hardware Description..............................................................................................................................................................................7

2.4.1 Front Panels, TX and RX Units ........................................................................................................................................................................ 7

2.4.2 Back Panel, TX Unit ...........................................................................................................................................................................................8

2.4.3 Back Panel, RX Unit ...........................................................................................................................................................................................9

3. INSTALLATION AND WIRING ..................................................................................................................................................... 10

APPENDIX A. REGULATORY INFORMATION ................................................................................................................................ 11

A.1 FCC Class B Statement .........................................................................................................................................................................11

A.2 NOM Statement .....................................................................................................................................................................................12

APPENDIX B. DISCLAIMER/TRADEMARKS ................................................................................................................................. 13

B.1 Disclaimer ...............................................................................................................................................................................................13

B.2 Trademarks Used in this Manual ..........................................................................................................................................................13

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LE AVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1. 8 7 7. 87 7. 2 2 6 9

SAFETY INSTRUCTIONS

1. Do not expose this apparatus to rain, moisture, dripping or splashing liquids. Do not place any objects filled with liquids, such as vases,

on the apparatus.

2. Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Make sure the unit is well ventilated.

3. To prevent risk of electric shock or fire hazard due to overheating, do not obstruct the unit’s ventilation openings with newspapers,

tablecloths, curtains, and similar items.

4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

5. Do not place sources of open flames, such as lighted candles, on the unit.

6. Clean this apparatus only with a dry cloth.

7. Unplug this apparatus during lightning storms or when unused for long periods of time.

8. Do not walk on or pinch the power cord, particularly at plugs.

9. Only use attachments/accessories specified by the manufacturer.

10. Refer all servicing to qualified service personnel.

41. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LE AVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1. 8 7 7. 87 7. 2 2 6 9

CHAPTER 1: SPECIFICATIONS

TABLE 1-1. SPECIFICATIONS

SPECIFICATION DESCRIPTION

Transmitter

Technical

Input Connectors (1) DisplayPort, (1) Audio

Resolution Support

800 x 600, 1024 x 768, 1152 x 864, 1176 x 664, 1280 x 720, 1280 x 768, 1280 x 800, 1280 x 960, 1280 x 1024,

1360 x 768, 1366 x 768, 1440 x 900, 1600 x 900, 1600 x 1024, 1600 x 1200, 1680 x 1050, 1768 x 992,

1920 x 1080 (Recommended), 1920 x 1200, 2048 x 1536, 2560 x 1440, 2560 x 1600, 3840 x 1080,

3840 x 2160 at 30 Hz, 4096 x 2160 at 30 Hz

NOTE: Copy Mode can support resolutions up to 4096 x 2160 at 30 Hz.

Maximum Data Rate 10.2 Gbps

Output Connectors (1) HDBT, (1) Audio

DDC Support Real Time EDID Emulation Support

User Controls (1) EDID switch

Environmental

Operating Temperature 32 to 113° F (0 to + 45° C)

Storage Temperature -4 to +158° F (-20 to +70° C)

Humidity 10% to 90%, noncondensing

ESD Protection Human-body Model: ±8KV (Air-gap discharge)/±4KV (Contact discharge)

Power

Power Supply 12 VDC, 2 A, one power supply powers both TX and RX units via integrated 48-V PoE

Power Consumption 14.2 W (max.)

Mechanical

Dimensions 0.98" H x 7.87" W x 3.94" D (2.5 x 20 x 10 cm)

Weight 1.1 lb. (0.5 kg)

Receiver

Technical

Input Connectors (1) HDBT, (1) Audio

Output Connectors (1) DisplayPort, (1) Audio

Environmental

Operating Temperature 32 to 113° F (0 to + 45° C)

Storage Temperature -4 to +158° F (-20 to +70° C)

Humidity 10% to 90%, noncondensing

ESD Protection Human-body Model: ±8KV (Air-gap discharge)/±4KV (Contact discharge)

Power

Power Supply Powered by the 12 VDC, 2 A power supply connected to the transmitter via integrated 48-V PoE

Power Consumption 14.2 W (max.)

Mechanical

Dimensions 0.98" H x 7.87" W x 3.94" D (2.5 x 20 x 10 cm)

Weight 1.1 lb. (0.5 kg)

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LE AVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1. 8 7 7. 87 7. 2 2 6 9

CHAPTER 1: SPECIFICATIONS

TABLE 1-2. TRANSMISSION DISTANCE

CABLE TYPE RANGE SUPPORTED VIDEO

CAT5e/6 330 ft. (100 m) 1080p at 60 Hz 36-bit

295 ft. (90 m) 1080p at 60 Hz 48-bit, 1080p at 60 Hz 3D, 3840 x 2160 at 30 Hz 4:4:4 8-bit

CAT6a/7 330 ft. (100 m) 1080p at 60 Hz 48-bit, 1080p at 60 Hz 3D, 3840 x 2160 at 30 Hz 4:4:4 8-bit

NOTE: Straight-through category cable wired to T568B standard is recommended.

61. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LE AVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1. 8 7 7. 87 7. 2 2 6 9

CHAPTER 2: OVERVIEW

2.1 INTRODUCTION

The 4KDPKVMXT-100M-R2 is a 100 m 4K DisplayPort over HDBT Extender with USB 2.0 and Audio Passthrough, and distributes

uncompressed 4K at 30 Hz UHD video, audio, power, RS-232 and USB 2.0 up to 328 feet (100 m) over a single CATx cable.

With USB 2.0 passthrough, it enables users to control or monitor a remote server in a harsh environment, or operate physically

inaccessible PCs, servers or workstations remotely. And bi-directional audio passthrough allows audio distribution in both directions.

The technology supports active real-time EDID Emulation, in other words, as long as the attached display is connected during operation,

all computers will be able to use the monitor profile properly whether the KVM port is selected or not.

With 48 V PoE integrated inside, it just needs one power supply connected to the TX unit to power both units. Its 12-V power supply is

secured with a screw-on connector to prevent the power from being accidentally disconnected. LEDs indicate that power is connected

and show an established connection between devices.

2.2 FEATURES

Using CAT6a/7 cables, outputs 4K x 2K at 30 Hz up to 328 feet (100 m) or 1080p at 60 Hz up to 328 feet (100 m)

Using CAT5e/6 cables, outputs 4K x 2K at 30 Hz up to 295 feet (90 m) or 1080p at 60 Hz up to 328 feet (100 m)

Supports DisplayPort 1.2 up to 4K at 30 Hz with HDCP 1.3 compliance

Offers USB 2.0 passthrough over HDBaseT, with USB-Host built in TX and USB-Device built in RX

Enables bi-directional stereo line audio passthrough over HDBaseT

Supports RS-232

Supports static EDID for up to 4096 x 2160 at 30 Hz, or 2K resolutions at 60 Hz;

Copy Mode can support resolutions up to 4096 x 2160 at 30 Hz

Provides one-way PoE, TX (PSE) with a PSU to power both TX and RX (PD)

All connectors are on one side for easy installation

2.3 WHAT’S INCLUDED

Your package should include the following items. If anything is missing or damaged, contact Black Box Technical Support

at 877-877-2269 or info@blackbox.com

(1) Transmitter

(1) Receiver

(1) 12-VDC, 2 A power supply

(2) 2-pin 3.5-mm Phoenix male connectors

(4) mounting brackets

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LE AVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1. 8 7 7. 87 7. 2 2 6 9

CHAPTER 2: OVERVIEW

2.4 HARDWARE DESCRIPTION

Section 2.4.1 describes the front panels of the TX and RX units. Section 2.4.2 explains the back panel of the TX unit. Section 2.4.3

shows the back panel of the RX unit.

2.4.1 FRONT PANELS, TX AND RX UNITS

1 2 3 4 5

FIGURE 2-1. FRONT PANEL, TX OR RX UNIT

TABLE 2-1. TX UNIT OR RX UNIT FRONT-PANEL COMPONENTS

NUMBER IN

FIGURE 2-1 COMPONENT DESCRIPTION

1Mode button

Switches the mode for the RS-232 port

Normal: RS-232 HDBaseT passthrough

Update: RS-232 firmware update

2Power LED On: The device is powered on

Off: The device is powered off

3 Status LED Blinking: The device is working properly

Off: The device is not working properly

4HDCP LED

On: Audio and Video signal is HDCP protected

Blinking: Audio and Video signal is not HDCP protected

Off: No Audio and Video signal

5 Link LED On: Link between transmitter and receiver has been established

Off/Blinking: Connection exceptions exist between the transmitter and receiver

81. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LE AVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1. 8 7 7. 87 7. 2 2 6 9

CHAPTER 2: OVERVIEW

2.4.2 BACK PANEL, TX UNIT

1 2 3 4 5 6 7 8

FIGURE 2-2. BACK PANEL, TX UNIT

TABLE 2-2. TX UNIT BACK-PANEL COMPONENTS

NUMBER IN

FIGURE 2-2 COMPONENT DESCRIPTION

112-VDC connector 12-VDC power input

2 HDBT Out Connects to the HDBT In port of an HDBT receiver

3RS-232 connector Used for RS-232 passthrough or firmware update

4 DP In Connects to a DisplayPort source

5 AUDIO In Connects to an audio source, such as a PC

6 AUDIO Out Connects to an audio device, such as an amplifier

7EDID switch

Copy: Copies EDID from monitor

Copy Mode can support resolutions up to 4096 x 2160 at 30 Hz

4K at 30 Hz: Internal Emulated EDID

8 USB Type B connector Connects to a USB host device, such as a server, computer, etc.

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LE AVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1. 8 7 7. 87 7. 2 2 6 9

CHAPTER 2: OVERVIEW

2.4.3 BACK PANEL, RX UNIT

1 2 3 4 5 6 7

FIGURE 2-3. BACK PANEL, RX UNIT

TABLE 2-3. RX UNIT BACK-PANEL COMPONENTS

NUMBER IN

FIGURE 2-3 COMPONENT DESCRIPTION

112-VDC connector 12-VDC optional power input for receiver, not required if TX has power and RX is connected to TX

2HDBT In Connects to the HDBT Out port of an HDBT transmitter

3RS-232 connector Used for RS-232 passthrough or firmware update

4 DP Out Connects to a DisplayPort display device

5 AUDIO In Connects to an audio source, such as a PC

6 AUDIO Out Connects to an audio device, such as an earphone

7 (4) USB Type A connectors Connects to USB devices such as mouse, keyboard, USB camera, etc.

10 1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LE AVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1. 8 7 7. 87 7. 2 2 6 9

CHAPTER 3: INSTALLATION AND WIRING

1. Set the EDID switch on the Transmitter:

COPY - Used for specific resolutions/display types. This is useful if you know your resolution requirement (or you are using

non-standard type resolutions).

4K@30Hz - Use this position for a generic display setup (mostly used for standard monitor resolutions such as 1920 x 1080).

2. Using a quality DisplayPort cable, connect a DisplayPort source to the DP in connector on the Transmitter.

NOTE: Make sure the source and display are 4K compatible if attempting to transmit an Ultra HD signal — check that all devices

are correctly configured for input/output compatibility.

3. Connect a good quality, well-terminated CAT5e/6/7 cable between the HDBT Out connector of the Transmitter to the HDBT In

connector of the Receiver.

NOTE: 230 feet (70 meters) at 4K or 328 feet (100 meters) at 1080p video are maximum recommended transmission distances

for this model under perfect transmission conditions — including straight cable runs with no electrical interference, bends,

kinks, patch panels or wall outlets. If any of the above factors are marginal in your installation, transmission range

may be affected — be careful to avoid where possible.

4. Connect the DisplayPort display device (LED/LCD display or projector) to the DP Out connector of the Receiver.

NOTE: We strongly recommended using the supplied mounting brackets to secure the receiver to a flat surface behind/near

the display device. Sudden movement of these devices could lead to loss of picture/sound if connections become loose

or strained, resulting in unnecessary service callbacks.

5. Connect the included 12-V power supply to the Transmitter. The PoE function carries power along the length of the cable one-way

to power the Receiver. No additional power supply is required at the display end of the cable run.

Check that the Power, Status, and HDCP and Link lights are illuminated on both units to indicate successful connection,

with a lit HDCP light illustrating the presence of encryption within the signal. Power and Link are static lights. The Status LED

should be blinking.

DC 12VHDBT OutRS232 DP In Audio In Audio Ou

SB Host

Tx Rx G

DC 12VHDBT OutRS232 DP Out Audio In Audio OutUSB Device

Tx Rx G

Copy 4k@30Hz

EDID

Transmitter

Receiver

CATx cable

DisplayPort Audio USB

Monitor Earphone Keyboard/Mouse/Mic/USB Camera

FIGURE 3-1. SAMPLE INSTALLATION

Inhaltsverzeichnis

Andere Black Box Extender Handbücher

Black Box

Black Box LB304A Bedienungsanleitung

Black Box

Black Box SDSL Network Extender 2000 Bedienungsanleitung

Black Box

Black Box UVX-HDMI-FO-MINI Bedienungsanleitung

Black Box

Black Box ServSwitch ACU3201A Bedienungsanleitung

Black Box

Black Box IC402A-R2 Bedienungsanleitung

Black Box

Black Box AVS-HDB-WPTX Bedienungsanleitung

Black Box

Black Box ServSwitch Duo KV6EXTB-R2 Bedienungsanleitung

Black Box

Black Box IC280A Bedienungsanleitung

Black Box

Black Box VX-HDMI-4KIP-TX Bedienungsanleitung

Black Box

Black Box ServSwitch ACU2009A Bedienungsanleitung

Black Box

Black Box LBPS310A-KIT Bedienungsanleitung

Black Box

Black Box AVX-HDMI2-FO-HDB-KIT Bedienungsanleitung

Black Box

Black Box LPR1101 Bedienungsanleitung

Black Box

Black Box LB510A-R2 Bedienungsanleitung

Black Box

Black Box AC163A Bedienungsanleitung

Black Box

Black Box 232 Monitor Plus Bedienungsanleitung

Black Box

Black Box LBLP01A-KIT Bedienungsanleitung

Black Box

Black Box ServSwitch ACU5114A Bedienungsanleitung

Black Box

Black Box LB401A Bedienungsanleitung

Black Box

Black Box ServSwitch ACU1022A Bedienungsanleitung

Black Box

Black Box ME772A-M/FSP Bedienungsanleitung

Black Box

Black Box ServSwitch ACU6001A Bedienungsanleitung

Black Box

Black Box AVU4001A Bedienungsanleitung

Black Box

Black Box IC244A-R2 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung