Black Box CampusLIGHT LCL114A-FEMM Bedienungsanleitung

CampusLIGHT

FAST ETHERNET FIBER EXTENDERS

LCL114A Fiber Extender

PowerLink

FEBRUARY 1999

LCL114A-FEMM

LCL114A-FESM

LCL114A-FESMC

Order toll-free in the U.S. 24 hours, 7A.M. Monday to midnight Friday: 877-877-BBOX

FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: http://www.blackbox.com · E-mail: [email protected]

CUSTOMER

SUPPORT

INFORMATION

FAST ETHERNET FIBER EXTENDERS

FEDERAL COMMUNICATIONS COMMISSION

AND

CANADIAN DEPARTMENT OF COMMUNICATIONS

RADIO FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses, and can radiate radio frequency energy and if

not installed and used properly, that is, in strict accordance with the

manufacturer’s instructions, may cause interference to radio communication. It

has been tested and found to comply with the limits for a Class A computing

device in accordance with the specifications in Subpart J of Part 15 of FCC rules,

which are designed to provide reasonable protection against such interference

when the equipment is operated in a commercial environment. Operation of this

equipment in a residential area is likely to cause interference, in which case the

user at his own expense will be required to take whatever measures may be

necessary to correct the interference.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

This digital apparatus does not exceed the Class A limits for radio noise emission

from digital apparatus set out in the Radio Interference Regulation of the

Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant

les limites applicables aux appareils numériques de la classe A prescrites dans le

Règlement sur le brouillage radioélectrique publié par le ministère des

Communications du Canada.

FAST ETHERNET FIBER EXTENDERS

NORMAS OFICIALES MEXICANAS (NOM)

ELECTRICAL SAFETY STATEMENT

INSTRUCCIONES DE SEGURIDAD

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes

de que el aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para

referencia futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de

operación deben ser respetadas.

4. Todas las instrucciones de operación y uso deben ser seguidas.

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo,

cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca,

etc.

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales

que sean recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea

recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más

allá a lo descrito en las instrucciones de operación. Todo otro servicio

deberá ser referido a personal de servicio calificado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no

interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá,

alfombra o superficie similar puede bloquea la ventilación, no se debe

colocar en libreros o gabinetes que impidan el flujo de aire por los orificios

de ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor

como radiadores, registros de calor, estufas u otros aparatos (incluyendo

amplificadores) que producen calor.

FAST ETHERNET FIBER EXTENDERS

11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del

tipo descrito en el instructivo de operación, o como se indique en el

aparato.

12. Precaución debe ser tomada de tal manera que la tierra fisica y la

polarización del equipo no sea eliminada.

13. Los cables de la fuente de poder deben ser guiados de tal manera que no

sean pisados ni pellizcados por objetos colocados sobre o contra ellos,

poniendo particular atención a los contactos y receptáculos donde salen

del aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las

recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las

lineas de energia.

16. El cable de corriente deberá ser desconectado del cuando el equipo no

sea usado por un largo periodo de tiempo.

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean

derramados sobre la cubierta u orificios de ventilación.

18. Servicio por personal calificado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en su

desempeño; o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

FAST ETHERNET FIBER EXTENDERS

CERTIFICATION NOTICE FOR

EQUIPMENT USED IN CANADA

The Canadian Department of Communications label identifies certified

equipment. This certification means that the equipment meets certain

telecommunications-network protective, operation, and safety requirements. The

Department does not guarantee the equipment will operate to the user’s

satisfaction.

Before installing this equipment, users should ensure that it is permissible to be

connected to the facilities of the local telecommunications company. The

equipment must also be installed using an acceptable method of connection. In

some cases, the company’s inside wiring associated with a single-line individual

service may be extended by means of a certified connector assembly (extension

cord). The customer should be aware that compliance with the above conditions

may not prevent degradation of service in some situations.

Repairs to certified equipment should be made by an authorized Canadian

maintenance facility—in this case, your supplier. Any repairs or alterations made

by the user to this equipment, or equipment malfunctions, may give the

telecommunications company cause to request the user to disconnect the

equipment.

Users should ensure for their own protection that the electrical ground

connections of the power utility, telephone lines, and internal metallic water pipe

system, if present, are connected together. This precaution may be particularly

important in rural areas.

CAUTION:

Users should not attempt to make such connections themselves,

but should contact the appropriate electric inspection authority,

or electrician, as appropriate.

The LOAD NUMBER (LN) assigned to each terminal device denotes the

percentage of the total load to be connected to a telephone loop which is used by

the device, to prevent overloading. The termination on a loop may consist of any

combination of devices, subject only to the requirement that the total of the load

numbers of all the devices does not exceed 100.

FAST ETHERNET FIBER EXTENDERS

Contents

Chapter Page

1. Specifications.................................................................................................8

1.1 Specifications for LCL114A.......................................................................8

2. Introduction....................................................................................................9

2.1 Product Overview.....................................................................................9

2.2 Features................................................................................................. 10

2.2.1 Drive Distances................................................................................ 10

2.2.2 Ergonomics...................................................................................... 10

2.2.3 Power Supply................................................................................... 10

3. Connectors & Cables................................................................................... 11

3.1 100BaseTx RJ45 Connectors................................................................. 11

3.2 100BaseTx UTP Cable........................................................................... 11

3.3 Fiber Optic Connectors........................................................................... 11

3.4 Fiber Optic Cable ................................................................................... 12

4. Installation ................................................................................................... 13

4.1 Making Network Connections ................................................................. 13

4.1.1 PC Station to Switch ........................................................................ 13

4.1.2 Hub to Switch................................................................................... 13

4.1.3 Switch to Switch............................................................................... 14

5. LED Indicators............................................................................................. 15

6. Accessories................................................................................................. 17

FAST ETHERNET FIBER EXTENDERS

Figures

Figure 1: LCL114A Fast Ethernet Extender.......................................................9

Figure 2: MDI/MDI-X Jack............................................................................... 11

Figure 3: Fiber Optic Connectors .................................................................... 12

Figure 4: Fiber Interface LEDs........................................................................ 15

Figure 5: Copper Interface LEDs..................................................................... 15

Figure 6: Rackmount Metalwork...................................................................... 17

FAST ETHERNET FIBER EXTENDERS

1. Specifications

1.1 Specifications for LCL114A

Interoperability 100BaseTx, 802.3u (hubs, repeaters, stations and switches)

Data Rate 100Mbps

Bit Error Rate 1 in 109(max.)

Drive Distance Fiber multimode

Fiber single-mode

2km

40km (Standard Power option)

60km (High Power option)

Optical Interface

Launch Power

Power Budget

Connector

Multimode

-20dBm

11dB

Multimode

-20dBm

11dB

Single-mode

-13dBm

19dB

Single-mode

(HP*)

-3dBm

30dB

Copper Interface 1x Shielded RJ45 (Normal)

1x Shielded RJ45 (Crossover)

Optical Safety Class 1 AEL

LED Indicators Fiber Interface Link

Fiber Integrity

Receive Fiber

Copper Interface Rx

Link

Receive Data

Copper Integrity

Power Power

Environmental Temperature

Humidity

Operating 0°C to 40°C

Storage -10°C to 85°C

Maximum 95% non-condensing

Power Supply External 110V or 220V AC adapter with plug-in jack

+12V/800mA minimum

Case Dimensions 118mm x 75mm x 25mm (L x W x H)

Gross (Shipping) Weight 1.2kg

Compliance FCC, CE, (UL, CSA - PSU)

(*HP) denotes High Power Optics

FAST ETHERNET FIBER EXTENDERS

2. Introduction

2.1 Product Overview

The CampusLIGHTFast Ethernet Fiber Extender (LCL114A) is designed for

100BaseTx to multimode or single-mode fiber conversion. When used in point-

to-point full duplex connections, the LCL114A Fiber Extender extends the

distance of Fast Ethernet networks up to 2km using multimode fiber or up to

60km using single-mode fiber. It can be used for links between switches/routers,

stations and servers.

The LCL114A features RJ45 connectors, multimode SC and ST, and single-

mode SC connectors to provide the copper to fiber interfaces.

The LCL114A is rackmountable in the LCL100-RACK and RM510 rackmount

frames that support either 110/220V AC or 48V DC power supplies.

100BaseTx to 100BaseFx Transceiver

FE-Link

PowerLink

12V 800mA

Link

II X

Figure 1: LCL114A Fast Ethernet Extender

FAST ETHERNET FIBER EXTENDERS

2.2 Features

2.2.1 Drive Distances

Single-mode

A fiber optic link of up to 60km over single-mode fiber is achievable between

LCL114A Fast Ethernet Extenders using the High Power option SC optics which

provide 30dB optical budget. The Standard Power option provides 19dB optical

budget and will support 40km.

Multimode

A fiber optic link of up to 2km over multimode fiber is achievable using either ST

or SC optics which provide 11dB of optical budget.

See Specifications for details.

2.2.2 Ergonomics

The LCL114A is packaged in a small freestanding case (118mm x 75mm x

25mm, L x W x H) complete with rackmount ears. This configuration allows the

LCL114A to be rackmounted in a 19"rack using the LCL100-RACK and RM510

rackmount frames.

The LCL100-RACK supports up to 4 CampusLIGHTunits in a 1U high 19"

frame and the RM510 supports up to 16 units in a 3U high 19"frame. For wall

mounting a bracket that holds the LCL114A and its power supply is available,

order code LCL100-WALL.

2.2.3 Power Supply

The LCL114A can be powered either from a small external power supply or from

a 3U high rackmounting power supply capable of supporting 14 devices. Two

variants are available: 90-264V AC (PS500) and 48V DC (LCL100-PS48).

Note:

Units ordered for use with the rackmounting power supply will not contain a

separate power supply; this must be ordered separately.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Extender Handbücher

Black Box

Black Box ACU2500A-R3 Bedienungsanleitung

Black Box

Black Box MDR3243A Bedienungsanleitung

Black Box

Black Box SDSL Network Extender 2000 Bedienungsanleitung

Black Box

Black Box Extreme T LB323A Bedienungsanleitung

Black Box

Black Box LC100 SERIES Gebrauchsanweisung

Black Box

Black Box LWE121A Bedienungsanleitung

Black Box

Black Box AVS-HDB-TX Bedienungsanleitung

Black Box

Black Box AVX-HDMI2-HDB-R2 Bedienungsanleitung

Black Box

Black Box LB200A Bedienungsanleitung

Black Box

Black Box IC404A-R2 Bedienungsanleitung

Black Box

Black Box USB Director RS-232 Bedienungsanleitung

Black Box

Black Box ServSwitch Wizard ACU5050A-R2 Bedienungsanleitung

Black Box

Black Box LB401A Bedienungsanleitung

Black Box

Black Box SDSL Network Extender 2000 Bedienungsanleitung

Black Box

Black Box AC1070A Bedienungsanleitung

Black Box

Black Box LMC5178A Bedienungsanleitung

Black Box

Black Box LBPS01A-KIT Bedienungsanleitung

Black Box

Black Box ACX300-R2 Bedienungsanleitung

Black Box

Black Box AVX-HDMI2-FO-HDB Bedienungsanleitung

Black Box

Black Box MT610A-ST Bedienungsanleitung

Black Box

Black Box ServSwitch ACU3201A Bedienungsanleitung

Black Box

Black Box ME930C-RJ11 Bedienungsanleitung

Black Box

Black Box ServSwitch ACS251A-R2 Bedienungsanleitung

Black Box

Black Box ACX1MR Series Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung