Black Box LBPS01A-KIT Bedienungsanleitung

Extends Ethernet with 100-/60-Mbps

downstream/upstream connections

over ordinary voice-grade copper.

Kit includes two extenders—one works as PoE power source

equipment and the other is a standard extender.

Bridges 10BASE-T/100BASE-TX Ethernet interface.

Supports connections up to 4000 feet (1219.2 m).

Select from Fast and Interleaved modes.

Provides low latency for video/voice/data applications.

IEEE 802.3af PoE compliant.

VDSL2 PoE Ethernet Extender Kit, PSE

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) •

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 •

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 •

Web site: www.blackbox.com • E-mail: info@blackbox.com

Customer

Support

Information

LBPS01A-KIT

724-746-5500 | blackbox.com

Page 2

VDSL2 PoE Ethernet Extender Kit, PSE

We‘re here to help! If you have any questions about your application

or our products, contact Black Box Tech Support at 724-746-5500

or go to blackbox.com and click on “Talk to Black Box.”

You’ll be live with one of our technical experts in less than 60 seconds.

Trademarks Used in this Manual

Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc.

Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

Page 3

FCC and IC RFI Statements

Federal Communications Commission and Industry Canada Radio

Frequency Interference Statements

This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict

accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to

comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of FCC rules,

which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial

environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own

expense will be required to take whatever measures may be necessary to correct the interference.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to

operate the equipment.

This digital apparatus does not exceed the Class A limits for radio noise emission from digital apparatus set out in the Radio

Interference Regulation of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de

la classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par Industrie Canada.

724-746-5500 | blackbox.com

Page 4

VDSL2 PoE Ethernet Extender Kit, PSE

Normas Oficiales Mexicanas (NOM) Electrical Safety Statement

INSTRUCCIONES DE SEGURIDAD

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas.

4. Todas las instrucciones de operación y uso deben ser seguidas.

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina de baño, lavabo, sótano mojado o cerca

de una alberca, etc..

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá a lo descrito en las instrucciones de operación.

Todo otro servicio deberá ser referido a personal de servicio calificado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no interfiera su uso. La colocación del aparato eléctrico

sobre una cama, sofá, alfombra o superficie similar puede bloquea la ventilación, no se debe colocar en libreros o gabinetes

que impidan el flujo de aire por los orificios de ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como radiadores, registros de calor, estufas u otros

aparatos (incluyendo amplificadores) que producen calor.

11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como

se indique en el aparato.

12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada.

13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados

sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas de energia.

16. El cable de corriente deberá ser desconectado del cuando el equipo no sea usado por un largo periodo de tiempo.

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación.

18. Servicio por personal calificado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en su desempeño; o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

Page 5

CE Statement

European Community (CE) Electromagnetic Compatibility Directive

This equipment has been tested and found to comply with the protection requirements of European

Emission Standard EN55022/EN61000-3 and the Generic European Immunity Standard EN55024.

EMC:

EN55022(2003)/CISPR-2( 2002): Class A

IEC61000-4-2 (2001): 4 KV CD, 8 KV AD

IEC61000-4-3( 2002): 3 V/m

IEC61000-4-4(2001): 1 KV (power line), 0.5 KV (signal line)

724-746-5500 | blackbox.com

Page 6

VDSL2 PoE Ethernet Extender Kit, PSE

1.Specifications ........................................................................................................................................................................................... 7

2. Overview................................................................................................................................................................................................ 8

2.1 Introduction ...................................................................................................................................................................................... 8

2.2 Features ............................................................................................................................................................................................ 8

2.3 Application ....................................................................................................................................................................................... 8

2.4 What’s Included ................................................................................................................................................................................ 9

2.5 LED Descriptions ............................................................................................................................................................................... 9

2.6 Front and Back Panels ......................................................................................................................................................................10

3. Installation .............................................................................................................................................................................................11

4. DIP Switches ..........................................................................................................................................................................................12

Page 7

Chapter 1: Specifications

1. Specifications

Data Rate (Maximum): 100/60 Mbps

Transmission Distance (Maximum): 4000 ft. (1219 m)

Flow Control: Half-/full-duplex, autodetects for 10BASE-T/100BASE-TX

MDI-X: Automatic

Standards: ITU-T G.993.1/2, SG15Q4 DMT compliant, trellis code with 1024 DMT bins,

EMI emissions compliant, FCC Class A, CE, IEEE 802.3/IEEE 802.3u Ethernet, 10BASE-T/100BASE-TX, IEEE 802.3af PoE

PoE Power Reception Supports: Endpoint: via twisted-pair Pins 1, 2, 3, 6 and 320 mA @ 48V DC

Connectors: PSE: (1) RJ-11, (1) RJ-45;

Standard: (1) RJ-11, (2) RJ-45

Indicators: PSE: (5) LEDs: Power, LAN, DSL, M/S, PSE;

Standard: (5) LEDs: Power, LAN 1, LAN 2 , DSL, M/S

Power Input: PSE: 12 VDC, 2 A;

Standard: 5 VDC, 1A

Temperature Tolerance: Operating: 32 to 122° F (0 to 50° C)

Humidity Tolerance: 5 to 95% noncondensing

Size: 0.8"H x 4.7"W x 3.5"D (2 x 12 x 9 cm)

724-746-5500 | blackbox.com

Page 8

VDSL2 PoE Ethernet Extender Kit, PSE

2. Overview

2.1 Introduction

The LBPS01A-KIT, VDSL2 (Very high-bit-rate Digital Subscriber Line) PoE Ethernet Extender Kit, provides broadband transmission

rates up to 100-/60-Mbps downstream/upstream over ordinary voice-grade single-pair copper line for point-to-point Ethernet

connectivity. The kit includes two extenders—one works as Power over Ethernet (PoE) power source equipment (PSE) and the

other is a standard extender.

The LBPS01A-KIT is a cost-effective solution for bandwidth-hungry applications such as LAN-to-LAN connectivity, video stream-

ing, FTTB, and MDU/MTU over single twisted-pair telephone line.

At 100-/60-Mbps downstream/upstream, LBPS01A-KIT supports transmission distances up to 500 feet (152.4 m), and at 28-/

0.3-Mbps it supports up to 4000 feet (1219 m). Using power sourcing equipment (PSE), the LBPS01A-KIT provides power over

the Ethernet cable to the 802.3af-compliant powered device.

The LBPS01A-KIT conforms to the ITU-T G.993.1 and G.993.2 to meet VDSL2 and SG15Q4 DMT for network requirements.

2.2 Features

• ITU-T G.993.1, G.993.2 VDSL2 and SG15Q4 DMT compliance

• 100-/60-Mbps downstream/upstream for distances up to 500 feet (152.4 m)

• Supports VDSL2 connection up to 4000 feet (1219 m) at 28-/0.3-Mbps (upstream/downstream)

• IEEE 802.3af compliant -48V PSE standard

• Minimum 15.4 watts for Class 3 output power

• Four DIP switches for configuration settings

• Trellis coding support for up to 1024 Discrete Multi-Tone (DMT) bins

• Auto MDI-X for 10BASE-T/100BASE-TX Ethernet LAN ports, so you don’t need a crossover cable on the Ethernet side

• Provides low latency for video/voice/data applications

• Line surge protection

2.3 Application

Figure 2-1. Typical application.

LAN,

Power

Internet

VDSL2 PoE Ethernet

Extender (PSE),

Standard Unit

VDSL2 PoE

Ethernet Extender

(PSE), PSE Unit

Max. 4000 ft.

(1219 m) for

DSL Line

Ethernet Switch

IP Camera

Page 9

Chapter 2: Overview

2.4 What’s Included

Your package should include the following items. If anything is missing or damaged, please contact Black Box Technical Support

at 724 -746-5500.

• (1) VDSL2 PoE Ethernet Extender (PSE)

• (1) VDSL2 PoE Ethernet Extender (Standard)

• (1) 12V DC, 2A Power Adapter for VDSL2 PoE Ethernet Extender PSE, PSE Unit

• (1) 5V DC, 1A Power Adapter for VDSL2 PoE Ethernet Extender PSE, Standard Unit

• This user’s manual on CD-ROM

2.5 LED Descriptions

Table 2-1. Indicators.

LED Color Function

Power Green Lights when power is on.

DSL Green Lights when VDSL2 is connected.

Blinks during VDSL2 handshaking.

M/S Green Lights when device is in master mode.

Off when device is in slave mode.

LAN Green Lights when Ethernet connection is made.

Blinks when transmitting/receiving data.

PSE Green Lights when unit is providing power over Ethernet.

Off when unit is not providing power over

Ethernet.

724-746-5500 | blackbox.com

Page 10

VDSL2 PoE Ethernet Extender Kit, PSE

2.6 Front and Back Panels

Figures 2-2 through 2-4 show the front and back panels of the extenders and describe their components.

Figure 2-2. Front panel, VDSL2 PoE Ethernet Extender (PSE), PSE unit.

Figure 2-3. Rear panel, VDSL2 PoE Ethernet Extender (PSE), PSE unit.

Figure 2-4. Front panel, VDSL2 PoE Ethernet Extender (PSE), Standard unit.

Figure 2-5. Rear panel, VDSL2 PoE Ethernet Extender (PSE), Standard unit.

RJ-11 Connector

Power Input

RJ-45 Connector

LED Indicators

DIP Switches

LED Indicators

DIP Switches

RJ-11 Connector

Power Input

RJ-45 Connectors

Inhaltsverzeichnis

Andere Black Box Extender Handbücher

Black Box

Black Box AC163A Bedienungsanleitung

Black Box

Black Box LMC5178A Bedienungsanleitung

Black Box

Black Box MEG201AE Bedienungsanleitung

Black Box

Black Box CampusLIGHT LCL114A-FEMM Bedienungsanleitung

Black Box

Black Box ACS2004A Bedienungsanleitung

Black Box

Black Box ICU504A Bedienungsanleitung

Black Box

Black Box LB401A Gebrauchsanweisung

Black Box

Black Box ME771A-M/FSP Bedienungsanleitung

Black Box

Black Box ACU8000A Bedienungsanleitung

Black Box

Black Box ServSwitch ACU1004A Bedienungsanleitung

Black Box

Black Box ServSwitch ACU3001A Bedienungsanleitung

Black Box

Black Box ACX1K Bedienungsanleitung

Black Box

Black Box Wizard AVU5001A Bedienungsanleitung

Black Box

Black Box ServSwitch ACU1001A Bedienungsanleitung

Black Box

Black Box ServSwitch Agility ACR1000A Bedienungsanleitung

Black Box

Black Box LB400A Bedienungsanleitung

Black Box

Black Box ACS2001A Bedienungsanleitung

Black Box

Black Box LS900A Bedienungsanleitung

Black Box

Black Box ACU5050A Bedienungsanleitung

Black Box

Black Box ACU1007A Bedienungsanleitung

Black Box

Black Box ServSwitch ACU1022A Bedienungsanleitung

Black Box

Black Box ACX1T Series Bedienungsanleitung

Black Box

Black Box 4KDPKVMXT-100M Bedienungsanleitung

Black Box

Black Box ACS1009A series Technisches Datenblatt

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung