Copyright 2006 Black Box Page 4
44
4 of
of of
of 49
4949
49
Introduction
The Black Box FaxReceiver MC200A is esigne to receive a fax an convert it into
an email to allow istribution that is more convenient an unwante faxes can be
electronically elete . The Black Box Fax-Receiver receives the fax an puts it into a
mail-server mailbox. From there, you or an a ministrator can rea an re- istribute
the fax to the appropriate email recipient on the network or print it if necessary.
This re uces paper waste, spee s up the communication an istribution of
information, allows automatic backup of receive faxes an eliminates the nee to
maintain a fax machine solely for the purpose of receiving faxes.
Easy Configuration
The setup is one using Telnet, which allows configuration in any network
environment like Win ows, Unix or Apple. Any Workstation or PC with Telnet
capabilities an access to the network can be use to configure the unit.
Features
External all voltage power supply (100-240 Volts, 50-60 Hz)
Extremely low power consumption of less than 5 watts.
Remote management from any PC
Retains its setup in Flash memory.
Powers up in less than 10 secon s.
Three login types, CRAM-MD5, LOGIN (AUTH=LOGIN) an non-authenticate .
System Architecture
The FaxReceiver MC200A uses a PCMCIA car to connect to the Fax Line; this allows the
FaxReceiver MC200A to be use in any country in the worl for which there is a PCMCIA
fax/mo em car available that fulfills the local stan ar s.
The FaxReceiver MC200A connects irectly to an Ethernet 10/100baseTx network via fixe IP
or DHCP. Before operating the evice a number of parameters have to be set up in the
FaxReceiver MC200A to allow log on to your company or Internet provi er's mail server.
3 ifferent login types, CRAM-MD5, LOGIN (AUTH=LOGIN) an non-authenticate . It will try
CRAM-MD5, first. If that fails, it falls back to insecure authentication (same as
Outlook Express uses), an it will fall back further to non-authenticate login if that
fails.
Setting up is achieve using the Telnet protocol an a telnet application is available for any
operating system. Check your PC, Apple or Unix operator manual.
Since the evice only relies on TCP/IP an SMTP it will work in any common network
environment.
