Black Box IC456A-R5 Bedienungsanleitung

Use your RS-232

equipment with

RS-422/449 RS-449

equipment.

Provides bidirectiona

sync or async

conversion of a

common y used

RS-232 and RS-422

signa s.

Choose from two

user-se ectab e

configurations.

User-se ectab e DCE

or DTE configuration.

Speed up to 64 kbps.

Perfect for industria

app ications.

he RS-232↔RS-422 Interface

Converter provides bidirec-

tional synchronous or async-

hronous conversion of all

commonly used RS-232 and

RS-422 signals. It is designed to

operate ith one port configured

as Data Terminal Equipment

(DTE) and the other port as Data

Communications Equipment

(DCE).

The converter has t o user-

selectable configurations: one

for connecting RS-422 modem

equipment to RS-232 terminal

equipment (DCE to DTE) and one

for connecting RS-232 modem

equipment to RS-422 terminal

equipment (DCE to DTE). Both

configurations allo bidirectional

data transfer.

Three models are available:

• A standalone unit for

115-VAC operation (IC456A-

R5).

232↔422 CONVERTER

DSR CTS DATA DSR CTS DATA

PWR

Connect RS-422 modem

equipment to RS-232 terminal

equipment (DCE to DTE) or

RS-232 modem equipment to

RS-422 terminal equipment

(DCE to DTE) for bidirectional

data transfer.

KeyFeatures

RS-232↔RS-422INTERFACECONVERTER

• A standalone unit for

230-VAC operation (IC456AE-

R3).

• A printed circuit card for

rackmounted units (IC456C-

R5).

The same RS-232↔RS-422

printed circuit card is used for

both 115- and 230-VAC applica-

tions, since the card itself derives

po er from the rack unit in hich

it is installed.

You might ant to order the

Interface Converter Rack

(RM060), hich is a 19-inch rack

that can hold up to eight printed

circuit cards. The rack has its

o n po er supply that is s itch-

selectable bet een 115 and

230 VAC. (For 48 VDC, use

RM062A).

The converter has seven LEDs

located on the front panel that

indicate the status of the input

signals.

There are LEDs for DSR (Data

Set Ready), CTS (Clear To Send),

and Data to sho the conditions

on the RS-232 interface, and a

duplicate set of LEDs to sho the

conditions on the RS-422

interface. There’s also an LED to

indicate PWR (po er).

Black Box Corporation • 1000 Park Drive • La rence, PA 15055-1018 • Tech Support: 724-746-5500 • www.blackbox.com • e-mail: [email protected]

Black Box Corporation.

10/13/2004 #16892

Connect an industrial controller’s RS-422 interface to your computer’s

RS-232 interface.

TypicalApplication

Speed: 64,000 bps, max.

Connectors: RS-232 port: DB25

female;

RS-422 port: DB37 female

Indicators: 7 LEDs sho status of

RS-232 and RS-422 signals and

indicate po er ON. RS-232 port:

DSR, CTS, DATA; RS-422 port:

DSR, CTS, DATA

Controls: RS-232 port: DTE/DCE DIP

shunts;

RS-422 port: DTE/DCE DIP shunts;

Slide s itch to enable receiver

termination

Temperature: Storage: -4 to +158°F

(-20 to +70°C);

Operating: 32 to 122°F (0 to 50°C)

Power: 115 VAC supply: ±10%,

100 mA;

230 VAC supply: ±10%, 50 mA

Size: Standalone: 2.3"H x 8"W x

11.9"D (5.8 x 20.3 x 30.2 cm);

Rackmount: 1.2"H x 7.5"W x 11.4"D

(3 x 19.1 x 29 cm)

Weight: Standalone: 2 lb. (0.9 kg);

Rackmount: 10 oz. (283.5 g)

The converter is easy to set for DCE or DTE operation. Simply install

the DIP shunts in the correct sockets on the circuit board.

One configuration is for connecting RS-422 DCE to RS-232 DTE. The

other configuration is for connecting RS-232 DCE to RS-422 DTE.

There is also a receiver termination s itch on the circuit board. It

has a termination s itch to insert 120-ohm resistance bet een the

receive data input leads. To enable termination, set the s itch to the ON

position. To disable termination, set the s itch to the OFF position.

TechnicallySpeaking

• RS-232 Cable

• RS-442/449 Cable

• Modem eliminator if you ant to connect t o DTEs together

through the converter

• Cross-over cable if you ant to connect t o DCEs together

through the converter

Additionalequipmentyoumayneed

Specifications

Ordering Information

ITEM CODE

RS-232↔RS-422 Interface Converter

115 VAC .................................................................IC456A-R5

230 VAC...............................................................IC456AE-R3

Card........................................................................IC456C-R5

You may also need cable…

RS-232 Cable ...............................................................ECM25C

RS-442/449 Cable ........................................................EDN37J

Connect our RS-232 equipment to our RS-422/449 equipment via the converter.

Modem or other

DCE device RS-422 Device

4 (T-)

6 (R-)

24 (R+)

22 (T+) R+

T-

T+

R-

RS-232↔422

Interface Converter

DIP- hunt

etting :

DCE DTE

Straight cable

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Medienkonverter Handbücher

Black Box

Black Box USB Director RS-232 Bedienungsanleitung

Black Box

Black Box IC152A Bedienungsanleitung

Black Box

Black Box AC095A Bedienungsanleitung

Black Box

Black Box LBMC300-MMST Bedienungsanleitung

Black Box

Black Box G.704 Bedienungsanleitung

Black Box

Black Box IC483AE-R2 Referenzhandbuch

Black Box

Black Box LE1500-BNC Bedienungsanleitung

Black Box

Black Box LE1510A-R2 Bedienungsanleitung

Black Box

Black Box LGC5151A Bedienungsanleitung

Black Box

Black Box DataBuffer Plus Bedienungsanleitung

Black Box

Black Box ME660A Bedienungsanleitung

Black Box

Black Box 232/CL-E Bedienungsanleitung

Black Box

Black Box LBH110A Bedienungsanleitung

Black Box

Black Box PI080A-R2 Bedienungsanleitung

Black Box

Black Box VSP-HDMI1X8-4K Bedienungsanleitung

Black Box

Black Box VSC-HDMI-SDI Bedienungsanleitung

Black Box

Black Box LE1500-BN Bedienungsanleitung

Black Box

Black Box LPD401A Bedienungsanleitung

Black Box

Black Box MicroConverter G.703 Bedienungsanleitung

Black Box

Black Box LD485A-HS Bedienungsanleitung

Black Box

Black Box Radian Flex VWP-1182 Series Bedienungsanleitung

Black Box

Black Box LE7401A-R2 Bedienungsanleitung

Black Box

Black Box IC235A Bedienungsanleitung

Black Box

Black Box LH1700A-SC-US Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung