Black Box IC961A Bedienungsanleitung

DECEMBER 2001

IC951A IC960A

IC952A IC961A

IC953A IC963A

IC954A-M IC964A

Mini Interface Converters

CUSTOMER SUPPORT INFORMATION

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

MINI INTERFACE CONVERTERS

Contents

Chapter Page

1. Specifications................................................... 3

2. Introduction.................................................... 5

2.1 Description ............................................... 5

2.2 Available Models....................................... 6

2.3 Features................................................... 10

3. Application .................................................... 11

4. Schematic Diagrams ..................................... 12

MINI INTERFACE CONVERTERS

TRADEMARKS USED IN THIS MANUAL

Any trademarks mentioned in this manual are

acknowledged to be the property of the trademark owners.

MINI INTERFACE CONVERTERS

Data Rates — Up to 200 kbps for all

models with a V.24/RS-232

interface; Up to 2048 kbps

for all other models

Transmission

Format — IC952A, IC953A:

Asynchronous; All other

models: Synchronous,

transparent to protocol

Operating

Temperature — 32 to 122°F (0 to 50°C)

Relative Humidity

Tolerance — 10 to 90%, noncondensing

Power — IC951A: Requires

connection to an external

power supply providing

9 VDC @ 300 mA (part

numbers PS017 and

PS017E); All other models:

No AC power required

1. Specifications

MINI INTERFACE CONVERTERS

Size — 0.9"H x 2.1"W x 4.3"D (2.3 x

5.3 x 10.9 cm); All models

also include a built-in

6.5-foot (2-m) cable

Weight — 14 oz. (397 g), including

cable and connector

Connectors — See the chart below

Model Connector 1 (DTE) Connector 2 (DCE)

IC951A 15-pin female 37-pin male

IC952A 25-pin female Terminal block

IC953A Terminal block 25-pin male

IC954A-M 25-pin male 37-pin male

IC960A 34-pin male 37-pin male

IC961A 34-pin male 25-pin male

IC963A 37-pin female 15-pin male

IC964A 25-pin female 34-pin male

MINI INTERFACE CONVERTERS

2.1 Description

These interface converters enable connection

between DTE and DCE data-communications

equipment with different interfaces. They operate

in synchronous applications (except for the

IC952A and IC953A, which operate in

asynchronous applications) at data rates up to

2048 kbps with balanced interface at both ends,

or at data rates up to 200 kbps with V.24/RS-232

at one end.

Mini Interface Converters perform both the

physical and electrical conversion between the two

interfaces. The circuitry is designed to provide

short-range interface conversion.

Most models operate without AC power, using

ultra-low power from the DTE and DCE

equipment data and control signals.

2. Introduction

MINI INTERFACE CONVERTERS

2.2 Available Models

IC954A-M

For converting between V.24/RS-232 and

V.36/RS-422 interfaces. The IC954A-M is switch-

selectable and is used either for connecting a

V.24/RS-232 DTE to a V.36/RS-422 DCE, or for

connecting a V.24 DCE to a V.35 DTE.

Installing the Converter is simple, since it plugs

directly into the DCE and DTE. Connect the

Converter directly to the RS-232/V.24 device, and

the cable connector to the RS-449 device. The

Converter comes factory strapped for RS-232

DTE/RS-449 DCE. To alternate this configuration:

1) Separate the two halves of the plastic cover by

pressing the marked places on the sides,

starting at the cable end.

2) Remove the 40-pin DTE/DCE socket by gently

grasping both sides and slowly moving it from

side to side.

3) Replace the socket so that the DCE faces the

RS-232 connector and the DTE faces the RS-449

device. Make sure that the pins are aligned with

the socket.

MINI INTERFACE CONVERTERS

NOTE

The DCE/DTE arrows on the shunt indicate the device you

are connecting to, not what the converter interface is.

4) Close the unit by pressing the two plastic covers

together.

IC952A, IC953A

For converting between V.24/RS-232 and

V.11/RS-422 interfaces. These converters are

switch-selectable and are used for connecting a

V.24/RS-232 DTE to a V.11/RS-422 DCE, or a V.24

DCE to a V.11 DTE. These Converters convert only

the data signals, not the control signals, and are

suitable only for asynchronous applications.

To install the Converter:

1) Separate the two halves of the plastic cover by

pressing the marked places on the sides,

starting at the cable end.

2) Connect the V.11 two twisted pairs to the screw

terminal block; transmit pair to “XMT” and

receive pair to “RCV.” A ground is provided for

optional connection of the cable shield.

3) Set the DTE/DCE switch of the Converter to

the required position (factory set to DCE).

MINI INTERFACE CONVERTERS

4) Note that the Converter connects only the data

signals. Some of the V.24 control signals are

pre-set depending on the DTE/DCE switch.

5) To close the Converter, simply press the two

halves of the cover together.

6) Connect the Converter directly to the 25-pin

connector of the terminal or computer port,

and fasten with the two screws—one on each

side of the Converter.

IC951A

For converting between RS-449/422 (V.36/V.11)

and X.21 interfaces. The Converter is used for

connecting a V.36 DCE to an X.21 DTE, and has a

built-in buffer to accommodate phase differences

between the receive and transmit clocks of the

DCE. Once the connectors are plugged into the

DTE and DCE, connect the DC jack to the DC

socket on the side of the Converter and insert the

wall-mount transformer into the AC mains. Note

that an internal elastic buffer is provided to solve

clock phase problems. This Converter requires an

external power supply.

MINI INTERFACE CONVERTERS

IC964A, IC961A

For converting between RS-530 and V.35 interfaces.

The Converter is used for connecting an RS-530

DTE to a V.35 DCE, or an RS-530 DCE to a V.35

DTE. To install the Converter, simply plug it

directly into the DTE or DCE. No strapping

adjustments are required. Just connect the 25-pin

connector to the RS-530 device and the other

connector to the V.35 device, and it’s ready to

operate.

IC960A

The Converter is used for connecting a V.35 DTE

to a 422 (V.36) DCE. To install the Converter,

simply connect the Converter to the RS-422/V.36

device and the cable connector to the V.35 device.

IC963A

For converting between X.21 and RS-422. The

Converter is used to connect an X.21 DCE to an

RS-422 DTE.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Medienkonverter Handbücher

Black Box

Black Box PI125A-R2 Bedienungsanleitung

Black Box

Black Box LMM101A Bedienungsanleitung

Black Box

Black Box VWP-2040 Bedienungsanleitung

Black Box

Black Box PI115A-C Bedienungsanleitung

Black Box

Black Box AC215A Bedienungsanleitung

Black Box

Black Box IC442A-R2 Bedienungsanleitung

Black Box

Black Box IC476A-F-R2 Bedienungsanleitung

Black Box

Black Box LE1500-BN Bedienungsanleitung

Black Box

Black Box EMEX-HDMI -R2 Bedienungsanleitung

Black Box

Black Box Video to VGA Converter Bedienungsanleitung

Black Box

Black Box PCA36A Bedienungsanleitung

Black Box

Black Box IC720A Bedienungsanleitung

Black Box

Black Box AC1056A-2 Bedienungsanleitung

Black Box

Black Box LGC5134A-R3 Bedienungsanleitung

Black Box

Black Box LPD401A Bedienungsanleitung

Black Box

Black Box LH1500 Bedienungsanleitung

Black Box

Black Box ICD100A Bedienungsanleitung

Black Box

Black Box LH2001A-ST-R3 Bedienungsanleitung

Black Box

Black Box LMC280A Gebrauchsanweisung

Black Box

Black Box LPD401A Bedienungsanleitung

Black Box

Black Box AC217A Bedienungsanleitung

Black Box

Black Box IC714A-V35-R2 Bedienungsanleitung

Black Box

Black Box DVI2VGA Bedienungsanleitung

Black Box

Black Box LHC042A-R4 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung