Black Box LGC135A Bedienungsanleitung

BL A C K B O X®

Converts 10-/100-/1000-Mbps copper to SFP.

This tiny Gigabit converter automatically senses speed

on the copper side.

MultiPower Miniature Media Converter

LGC135A

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S.

call 724-746-5500) • FREE technical support 24 hours a day, 7 days

a week: Call 724-746-5500 or fax 724-746-0746 • Mailing address:

Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

Customer

Support

Information

724-746-5500 | blackbox.com

Page 2

Trademarks Used in this Manual

Black Box and the Double Diamond logo are registered trademarks of

BB Technologies, Inc.

UL is a registered trademark of Underwriters Laboratories.

Any other trademarks mentioned in this manual are acknowledged to be

the property of the trademark owners.

Disclaimer

Black Box Network Services shall not be liable for damages of any kind, including,

but not limited to, punitive, consequential or cost of cover damages, resulting from

any errors in the product information or specifications set forth in this document

and Black Box Network Services may revise this document at any time without

notice.

724-746-5500 | blackbox.com Page 3

FCC and IC RFI Statements

FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY

CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses, and can radiate radio-frequency energy, and if

not installed and used properly, that is, in strict accordance with the manufacturer’s

instructions, may cause interference to radio communication. It has been tested

and found to comply with the limits for a Class A computing device in accordance

with the specifications in Subpart B of Part 15 of FCC rules, which are designed

to provide reasonable protection against such interference when the equipment

is operated in a commercial environment. Operation of this equipment in a

residential area is likely to cause interference, in which case the user at his own

expense will be required to take whatever measures may be necessary to correct

the interference.

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This digital apparatus does not exceed the Class A limits for radio noise emission

from digital apparatus set out in the Radio Interference Regulation of Industry

Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant

les limites applicables aux appareils numériques de classe A prescrites dans le

Règlement sur le brouillage radioélectrique publié par Industrie Canada.

724-746-5500 | blackbox.com

Page 4

NOM Statement

Normas Oficiales Mexicanas (NOM)Electrical Safety Statement

INSTRUCCIONES DE SEGURIDAD

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes

de que el aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para

referencia futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de

operación deben ser respetadas.

4. Todas las instrucciones de operación y uso deben ser seguidas.

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca

de la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc.

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que

sean recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea

recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá

a lo descrito en las instrucciones de operación. Todo otro servicio deberá ser

referido a personal de servicio calificado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no

interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá,

alfombra o superficie similar puede bloquea la ventilación, no se debe colocar

en libreros o gabinetes que impidan el flujo de aire por los orificios de

ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor

como radiadores, registros de calor, estufas u otros aparatos (incluyendo

amplificadores) que producen calor.

11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del

tipo descrito en el instructivo de operación, o como se indique en el aparato.

724-746-5500 | blackbox.com Page 5

NOM Statement

12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización

del equipo no sea eliminada.

13. Los cables de la fuente de poder deben ser guiados de tal manera que no

sean pisados ni pellizcados por objetos colocados sobre o contra ellos,

poniendo particular atención a los contactos y receptáculos donde salen del

aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las

recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas

de energia.

16. El cable de corriente deberá ser desconectado del cuando el equipo no sea

usado por un largo periodo de tiempo.

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean

derramados sobre la cubierta u orificios de ventilación.

18. Servicio por personal calificado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en su

desempeño; o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

724-746-5500 | blackbox.com

Page 6

Table of Contents

1. Specifications......................................................................................................7

2. Overview.............................................................................................................8

2.1 Introduction.................................................................................................8

2.2 Features .......................................................................................................8

2.3 What’s Included...........................................................................................9

2.4 Hardware Description..................................................................................9

3. Installation and Operation................................................................................10

3.1 Installing the MultiPower Media Converter ..............................................10

3.2 Powering the Media Converter.................................................................10

3.3 LED Operation ...........................................................................................10

Appendix: Fiber Optic Cleaning Guidelines and Electrostatic Discharge

Precautions ................................................................................................11

A.1 Fiber Optic Cleaning Guidelines ................................................................11

A.2 Electrostatic Discharge Precautions...........................................................11

724-746-5500 | blackbox.com Page 7

Chapter 1: Specifications

1. Specifications

Approvals FCC Class A, UL/cUL, CSA, CE, RoHS

Standards IEEE 802.3 10BASE-T twisted pair,

IEEE 802.3u 100BASE-TX twisted pair,

IEEE 802.3ab 1000BASE-T twisted pair,

IEEE 802.3z 1000BASE-LX or SX fiber

Ethernet

Connections

Fixed copper port: 10/100/1000BASE-T, autonegotiation,

auto-cross, flow control, 1,536 MTU, full line-rate forwarding;

SFP fiber port: 10/100/1000BASE-T, autonegotiation, auto-cross,

flow control, 10,240 MTU, full line-rate forwarding

Forwarding Layer 2 packet switching, store-and-forward;

Forwarding rate: 1,488,096 pps for 1000 Mbps

MTU Maximum packet size: 10240,

Jumbo and super jumbo frames supported

Connectors (1) 10/100/1000 RJ-45 twisted-pair copper,

(1) 10/100/1000 SFP fiber slot

Indicators (2) LEDs:

(1) FX LNK/ACT,

(1) TX LNK/ACT

Environment Temperature Tolerance:

Operating: 32 to 122° F (0 to 50° C),

Storage: -31 to +167° F (-35 to +75° C);

Humidity: 5 to 95% (noncondensing);

Altitude: 0 to 10,000 ft.

Power AC wall adapter:

Input: 100 to 240 VAC,

Output: 5 VDC, 2 A max.

Dimensions 0.83"H x 1.8"W x 3.35"D (2.11 x 4.57 x 8.51 cm)

Weight 0.7 lb. (0.3 kg)

724-746-5500 | blackbox.com

Page 8

Chapter 2: Overview

2. Overview

2.1 Introduction

The MultiPower Miniature Media Converter links 10-, 100-, or 1000-Mbps

segments to fiber cabling. An SFP port enables you to use an SFP to link the

converter to many kinds of fiber cable: dual-strand available in LC connectors, and

single-strand fiber SFPs available in SC connectors. The fiber port always operates at

1000 Mbps full duplex; the copper port autonegotiates the connected device’s

speed and duplex mode: 10 Mbps, 100 Mbps, or 1000 Mbps, and half-duplex or

full-duplex (including flow control).

The SFP slot requires an SFP module, with or without DDMI (sold separately). SFPs

must be MSA-compliant and meet the Class 1 Laser Safety Standard.

Choose from multimode and single-mode SFPs. With a single-mode SFP, the media

converter supports distances up to 40 kilometers (24.8 mi.), even 70 kilometers

(43.5 mi.), depending on the model you order.

For extra versatility, you can power the Multipower Miniature Media Converter one

of three ways: through the external AC power supply included with each converter,

through the optional USB Power Adapter Cable (which plugs into a PC's USB port

and is sold separately), or through the optional rackmount PowerTray (sold

separately). The PowerTray provides power for up to 18 converters in only 5U of rack

space. Rackmount ears are included.

2.2 Features

• Connect Ethernet, Fast Ethernet, or Gigabit Ethernet copper ports to fiber optic

cable.

• Autosensing copper ports make them perfect for migrating networks.

• Accepts 1250-Mbps SFPs.

• Use as standalone media converters or rackmount in the optional PowerTray.

• Powered by its universal AC power supply, a PC's USB port, or the optional

rackmountable PowerTray.

• Auto MDI/MDI-X means you never need to worry about what kind of cable to

use.

• Easy to install. Just plug and play.

• Compact size.

• Uses inexpensive CAT5e twisted-pair cable on the copper side.

• Offers Link Fault Pass-Through (LFPT).

724-746-5500 | blackbox.com Page 9

Chapter 2: Overview

2.3 What’s Included

Your package should include the following items. If anything is missing or damaged,

contact Black Box Technical Support at 724-746-5500 or info@blackbox.com.

• MultiPower Miniature Media Converter

• This user’s manual

You will also need:

• An SFP fiber module

NOTE: Table 2-1 lists compatible SFP modules.

Table 2-1. SFP modules.

Product Code Description

LFP411 SFP, 1250-Mbps Fiber with Extended Diagnostics,

850-nm Multimode, LC, 550 m

LFP412 SFP, 1250-Mbps Fiber with Extended Diagnostics,

1310-nm Multimode, LC, 2 km

LFP413 SFP, 1250-Mbps Fiber with Extended Diagnostics,

1310-nm Single-Mode, LC, 10 km

LFP414 SFP, 1250-Mbps Fiber with Extended Diagnostics,

1310-nm Single-Mode, LC, 30 km

2.4 Hardware Description

RJ-45

connector

SFP slot

TX LED

RX LED

Figure 2-1. LGC135A.

724-746-5500 | blackbox.com

Page 10

Chapter 3: Installation and Operation

3. Installation and Operation

3.1 Installing the MultiPower Miniature Media Converter

The LGC135A installs in a PowerTray or can be used as a standalone media

converter. As a standalone, the converter uses a universal external switching power

cube with 100–240 ±10% VAC input and 5 VDC output.

3.2 Powering the Media Converter

The LGC135A includes multiple powering options:

• A country-specific, high-reliability AC power adapter (included)

• PowerTray (ordered separately) for rackmounting

3.3 LED Operation

Each media converter includes two LEDs, located on the RJ-45 connector

(see Figure 2-1).

Table 3-1. LED indicators.

LED Description

TX LNK/ACT Glows green when a link is established on the fiber port.

Blinks green when activity is detected on the fiber port.

RX LNK/ACT Glows amber when a link is established on the copper port.

Blinks amber when activity is detected on the copper port.

Inhaltsverzeichnis

Andere Black Box Medienkonverter Handbücher

Black Box

Black Box AC216A Bedienungsanleitung

Black Box

Black Box Radian Flex VWP-1182 Series Bedienungsanleitung

Black Box

Black Box IE GIGA MC TX/SFP Bedienungsanleitung

Black Box

Black Box LE1500-BNC Bedienungsanleitung

Black Box

Black Box AC095A Bedienungsanleitung

Black Box

Black Box ME660A Bedienungsanleitung

Black Box

Black Box IC830A Bedienungsanleitung

Black Box

Black Box IC135A Bedienungsanleitung

Black Box

Black Box IC470A Bedienungsanleitung

Black Box

Black Box LMC5125A Bedienungsanleitung

Black Box

Black Box LME020A Bedienungsanleitung

Black Box

Black Box IC292A Bedienungsanleitung

Black Box

Black Box LPD500A Bedienungsanleitung

Black Box

Black Box MTU200-N64M Bedienungsanleitung

Black Box

Black Box CL080A-F Bedienungsanleitung

Black Box

Black Box PC480A Bedienungsanleitung

Black Box

Black Box LMC280A Gebrauchsanweisung

Black Box

Black Box LH1700A-SC-US Bedienungsanleitung

Black Box

Black Box 232/CL-E Bedienungsanleitung

Black Box

Black Box AC1056A-2 Bedienungsanleitung

Black Box

Black Box AC211A-R2 Bedienungsanleitung

Black Box

Black Box AC340A-R2 Bedienungsanleitung

Black Box

Black Box IC149A-R2 Bedienungsanleitung

Black Box

Black Box LMC11032A Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung