Black Box LGC215A Bedienungsanleitung

USER MANUAL

24/7 TECHNICAL SUPPORT AT 1.877.877.2269 OR VISIT BLACKBOX.COM

LGC215A

Media Converter

10G Base-T to 10G Base-R

10/100/1000Base-T to 1000Base-X

POE+ Gigabit Ethernet Converter SFP

UTP

ACT

Link

10G

PWR

Link

ACT

10/100/1000BT

TO 1000BX

POE+ GB MEDIA

CONVERTER

TABLE OF CONTENTS

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

1. SPECIFICATIONS...................................................................................................................................................................................... 3

2. OVERVIEW................................................................................................................................................................................................. 4

2.1 Introduction.......................................................................................................................................................................................................... 4

2.2 What’s Included................................................................................................................................................................................................... 4

2.3 Hardware Description......................................................................................................................................................................................... 4

3. LINK-FAULT PASSTHROUGH (LFP) ........................................................................................................................................................ 6

4. INSTALLING THE CONVERTER............................................................................................................................................................... 7

5. POE FUNCTION......................................................................................................................................................................................... 8

APPENDIX A: TWISTED-PAIR AND FIBER CABLES................................................................................................................................... 9

A.1 RJ-45 Cable Pin Assignment ............................................................................................................................................................................. 9

A.2 Fiber Optic Cable .............................................................................................................................................................................................. 10

APPENDIX B: REGULATORY INFORMATION ........................................................................................................................................... 11

B.1 FCC Statement ...................................................................................................................................................................................................11

B.2 NOM Statement ................................................................................................................................................................................................ 12

APPENDIX C: DISCLAIMER/TRADEMARKS ............................................................................................................................................ 13

C.1 Disclaimer .......................................................................................................................................................................................................... 13

C.2 Trademarks Used in this Manual..................................................................................................................................................................... 13

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

TABLE 1-1. SPECIFICATIONS

SPECIFICATION DESCRIPTION

Approvals FCC Class B, CE, RoHS

Description

Pure Networking Copper to Fiber Media Converter - 10/100/1000BASE-TX to 1000BASE-X SFP PoE+

Connectors

(1) RJ-45, (1) SFP cage

Media Supported

UTP: CAT5/5e/6;

Fiber: Multimode (MM): 50/125 µm or 62.5/125 µm;

Fiber Single-mode (SM): 9/125 µm

Distance

CATx: 328 ft. (100 m)

Forwarding Rate

10 Mbps: 14,880 pps, 100 Mbps: 148,800 pps, 1000 Mbps: 1,480,000 pps

Frame Sizes

Up to 9216 bytes

Power

Media converter: 48 VDC, 72 W, barrel connector;

External power adapter included: In-line type, 100-240 VAC, 50/60 Hz, 48 VDC, 1.5 A, IEC320 C13/

C14, with US power cord

Standards

IEEE 802.3, IEEE 802.3U, 10/100BASE-TX, 100BASE-FX, IEEE 802.3x flow control for full-duplex mode,

802.3ab 1000BASE-T, 802.3z 1000BASE-X, 802.3at PoE+ (25W)

Dimensions

1” H x 3.7” W x 2.7” D (2.5 x 9.4 x 6.9 cm)

Weight 0.7 lb. (0.3 kg)

Temperature

Operating: 32 to 122° F (0 to 50° C);

Storage: -4 to +158° F (-20 to +70° C)

Mounting

Standalone

CHAPTER 1: SPECIFICATIONS

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

CHAPTER 2: OVERVIEW

2.1 INTRODUCTION

The 10/100/1000BASE ‐T to 1000BASE-X-PoE+ Gigabit Ethernet Converter SFP supports Gigabit copper and fiber media for network

connection. This converter can be used as a standalone unit.

2.2 WHAT’S INCLUDED

Before you start installing the Converter, verify that the package contains the following:

10/100/1000BASE ‐T to 1000BASE-X-PoE+ Gigabit Ethernet Converter SFP

48-VDC power adapter

Power cord

If anything is missing or damaged, contact Black Box Technical Support at 877-877-2269 or info@blackbox.com

2.3 HARDWARE DESCRIPTION

Figures 2-1 and 2-2 show the front and back panels of the converter. Table 2-1 describes its components.

1 2 3

FIGURE 2-1. FRONT PANEL

4 5

FIGURE 2-2. BACK PANEL

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

CHAPTER 2: OVERVIEW

TABLE 2-1. MEDIA CONVERTER COMPONENTS

NUMBER IN FIGURE 2-1 OR 2-2 COMPONENT DESCRIPTION

1 SFP cage SFP module installs here

LED indicators

See Table 2-2

RJ-45 connector

Links to RJ-45 cable

Barrel connector for power

Links to 47–57-VDC power supply

4-position DIP switch

Set for LFP or 10M operation

TABLE 2-2. LED INDICATORS

LED NAME STATUS DESCRIPTION

PWR ON Power is ON and normal

FX Link/ACT

Connection Status display for fiber link. ON indicates that the fiber link is correctly connected

Blinking

Packet is being transmitted through the FX end

OFF Port link is down

Fiber signal is detected

OFF

No fiber signal detected

1000M

Link is operating at 1000 Mbps

OFF Link is operating at 10/100 Mbps

TX Link/Act

Connection status display for copper link. ON indicates that the link is correctly connected

Blinking

Active status display of copper link. Packet is being transmitted through the TX end

OFF

Port link is down

PoE

Port is provided 52-VDC power toa remote powered device (PD)

OFF Port is not providing 52-VDC power to a remote powered device (PD)

TABLE 2-3. DIP SWITCHES

LED NAME STATUS DESCRIPTION

LFP

Turn ON the Link Fault Passthrough (LFP) detection

OFF

Turn OFF the Link Fault Passthrough (LFP) detection

10M

Twisted-pair link is operating at 10 Mbps

OFF

Twisted-pair link is operating

at 100/1000 Mbps

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

CHAPTER 3: LINK FAULT PASSTHROUGH (LFP)

The LFP function includes the Link Fault Pass Through function (LLCF/LLR) and the DIP Switch design. LLCF/LLR can immediately

alarm administrators the problem of the link media and provide efficient solution to monitor the net. By setting the DIP switch, you

can disable or enable the LFP function.

LLCF (Link Loss Carry Forward) means that when a device connected to the converter and the TP line loses the link, the converter’s

fiber will disconnect the link of transmit. LLR (Link Loss Return) means that when a device connected to the converter and the fiber

line loses the link, the converter’s fiber will disconnect the link of transmit. Both can immediately alarm administrators that there is

a problem with the link media.

NOTE: The LFP function is turned off as default. This feature can also be turned on via the side DIP-Switch. If you are not familiar

with the network installation and for diagnostic purposes (i.e. check which end is broken), you can turn it on and reset the converter

to make it take effect. Otherwise, keep it in the default position.

Management

Station

Switch/Hub

w/SNMP

Media

Management

Switch/Hub

Converter

Media

Converter

LFP ON LFP ON

Fiber CableTP TP

FIGURE 3-1. LFP FUNCTION

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

CHAPTER 4: INSTALLING THE CONVERTER

Follow these steps to install the PoE+ Media converter:

1. Turn off the power of the device/station in a network to which the Switch will be attached.

2. Ensure that there is no activity in the network.

3. Install the SFP module.

TABLE 4-1. COMPATIBLE SFPS

PART NUMBER DESCRIPTION

LFP411

SFP - 1250-Mbps, Extended Diagnostics, 850-nm Multimode Fiber, 550-m, LC

LFP412

SFP - 1250-Mbps, Extended Diagnostics, 1310-nm Multimode Fiber, 2-km, LC

LFP413

SFP - 1250-Mbps, Extended Diagnostics, 1310-nm Single-Mode Fiber, 10-km, LC

LFP414

SFP - 1250-Mbps, Extended Diagnostics, 1310-nm Single-Mode Fiber, 30-km, LC

LFP418

SFP - 1250-Mbps, Extended Diagnostics, 1550-nm Single-Mode Fiber, 80-km, LC

LFP420, LFP421

SFP - 1250-Mbps, Extended Diagnostics, 1550-nm TX, 1310-nm RX, Simplex, Single-Mode Fiber, 10-km, LC;

SFP - 1250-Mbps, Extended Diagnostics, 1310-nm TX, 1550-nm RX, Simplex Single-Mode Fiber, 10-km, LC

LFP416

SFP - 1250-Mbps, Extended Diagnostics, 10/100/1000BASE-T, SGMII Interface, RJ-45

NOTE: LFP420, LFP421 are single-strand fiber SFPs, so they must be used in pairs.

NOTE: Use the LFP416 for a copper interface.

NOTE: Only the built-in copper interface will do PoE.

4. Attach a fiber cable from the Switch to the fiber network.

5. Attach a CAT5/5e/6 UTP cable from the 10/100/1000BASE-T network to the RJ-45 port on the switch.

6. Connect the 48-VDC power adapter to the switch and verify that the Power LED lights up.

7. Turn on the power of the device/station, the TX Link and FX Link LEDs should light when all cables are attached.

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

CHAPTER 5: POE FUNCTION

Before your installation, we recommended that you check your network environment. If there is an IEEE 802.3at/802.3af device you

need to power on, the switch can provide a way to supply power for this Ethernet device conveniently and easily. The Switch equips

an AC-DC adapter with 52-VDC input and it injects the DC power into the pin of the twisted pair cable (Pin 1, 2, 3 and 6).

550m~120km 100 meters

LGC215A

PoE+ camera

Switch

Data Data + Power

Fiber optic cable Twisted-pair cable

FIGURE 5-1. POE INSTALLATION

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

APPENDIX A: TWISTED-PAIR AND FIBER CABLES

A.1 RJ-45 CABLE PIN ASSIGNMENT

There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following diagrams show the pin allocation and

color of straight cable and crossover cable connections.

234568

1 2 3 6

FIGURE A-1. RJ-45 CONNECTOR PINNING

1 2 3 4 5 6 7 8

FIGURE A-1. STRAIGHT-THROUGH AND CROSSOVER CABLE PINNING

NOTE: Make sure your connected cables have the correct pin assignment and color as above picture before deploying the cables

into your network.

SIDE 1 SIDE 2

1 - White/Orange 1 - White/Orange

2 - Orange 2 - Orange

3 - White/Green 3 - White/Green

4 - Blue 4 - Blue

5 - White/Blue 5 - White/Blue

6 - Green 6 - Green

7 - White/Brown 7 - White/Brown

8 - Brown 8 - Brown

SIDE 1 SIDE 2

1 - White/Orange 1 - White/Green

2 - Orange 2 - Green

3 - White/Green 3 - White/Orange

4 - Blue 4 - Blue

5 - White/Blue 5 - White/Blue

6 - Green 6 - Orange

7 - White/Brown 7 - White/Brown

8 - Brown 8 - Brown

STRAIGHT- THROUGH CABLE PINNING

CROSSOVER CABLE PINNING

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

APPENDIX A: TWISTED-PAIR AND FIBER CABLES

A.2 FIBER OPTIC CABLE

TABLE A-1. FIBER OPTIC PATCH CABLE

STANDARD FIBER TYPE CABLE SPECIFICATION

1000BASE-SX (850 nm)

Multimode

50/125 µm or 62.5/125 µm

1000BASE-LX (1300 nm)

Multimode

50/125 µm or 62.5/125 µm

Single-mode

9/125 µm

Inhaltsverzeichnis

Andere Black Box Medienkonverter Handbücher

Black Box

Black Box IC108A Bedienungsanleitung

Black Box

Black Box VGA to Video Portable II Bedienungsanleitung

Black Box

Black Box HP Series Bedienungsanleitung

Black Box

Black Box AC135A Bedienungsanleitung

Black Box

Black Box AC211A-R2 Bedienungsanleitung

Black Box

Black Box LGC5150A Bedienungsanleitung

Black Box

Black Box AC139A Bedienungsanleitung

Black Box

Black Box LE6601C Bedienungsanleitung

Black Box

Black Box LH1500A-R3 Bedienungsanleitung

Black Box

Black Box USB Director RS-232 Bedienungsanleitung

Black Box

Black Box AC215A Bedienungsanleitung

Black Box

Black Box AC136A Bedienungsanleitung

Black Box

Black Box Video to VGA Converter Bedienungsanleitung

Black Box

Black Box ICD400A Bedienungsanleitung

Black Box

Black Box LPS500A-MM-SC Bedienungsanleitung

Black Box

Black Box ServSensor JR EME102A Bedienungsanleitung

Black Box

Black Box AC095A Bedienungsanleitung

Black Box

Black Box AC249A Bedienungsanleitung

Black Box

Black Box SP385A-R3 Bedienungsanleitung

Black Box

Black Box AC150A-2 Bedienungsanleitung

Black Box

Black Box SP385A-R2 Bedienungsanleitung

Black Box

Black Box LMC11002A Bedienungsanleitung

Black Box

Black Box PCD50A Bedienungsanleitung

Black Box

Black Box MicroConverter G.703 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung