Black Box LGC320A-R2 Bedienungsanleitung

LGC320A-R2 LGC324A-R2 LGC328A-R2 LGC322A-NPS

LGC321A-R2 LGC325A-R2 LGC329A-R2

LGC322A-R2 LGC326A-R2 LGC320A-NPS

LGC323A-R2 LGC327A-R2 LGC321A-NPS

Multi-Power Miniature Media Converter 10/100/1000

Provides Gigabit speeds in a

robust media converter. Uses

duplex multimode, duplex single-mode,

or single-strand single-mode fiber,

depending on the converter model.

FCC and IC RFI Statements

Page 2 724-746-5500 | blackbox.com LGC320A-R2

FCC and Industry Canada RF Interference Statements

Class A Digital Device. This equipment has been tested and found to comply

with the limits for a Class A computing device pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. However, there is no guarantee

that interference will not occur in a particular installation. This equipment

generates, uses, and can radiate radio frequency energy, and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. If this equipment does cause harmful interference to radio or

telephone reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one of the

following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

•Consult an experienced radio/TV technician for help.

CAUTION

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

To meet FCC requirements, shielded cables and power cords are required to

connect this device to a personal computer or other Class A certified device.

This digital apparatus does not exceed the Class A limits for radio noise

emission from digital apparatus set out in the Radio Interference Regulation

of Industry Canada.

Certifications

LGC320A-R2 724-746-5500 | blackbox.com Page 3

Certifications

European Directive 2002/96/EC (WEEE) requires that any equipment that

bears this symbol on product or packaging must not be disposed of with

unsorted municipal waste. This symbol indicates that the equipment should

be disposed of separately from regular household waste. It is the

consumer’s responsibility to dispose of this and all equipment so marked

through designated collection facilities appointed by government or local

authorities. Following these steps through proper disposal and recycling will

help prevent potential negative consequences to the environment and

human health. For more detailed information about proper disposal, please

contact local authorities, waste disposal services, or the point of purchase for

this equipment.

Class 1 Laser product, Luokan 1 Laserlaite,

Laser Klasse 1, Appareil A’Laser de Classe

Table of Contents

Page 4 724-746-5500 | blackbox.com LGC320A-R2

Table of Contents

Part Numbers......................................................................................................5

1. Specifications.........................................................................................6

2. Overview: About the Multi-Power Miniature Media Converter

10/100/1000 ...........................................................................................7

3. Install the Multi-Power Miniature Media Converter 10/100/1000...........8

3.1 Powering the Multi-Power Miniature Media Converter 10/100/1000 .....8

3.1.1 DC Terminal Block Wiring Instructions..........................................8

3.2 DIN Rail Mounting..................................................................................9

3.3 Cascading Power.................................................................................10

3.4 DC Power Supply Precautions.............................................................10

4. Operation..............................................................................................11

4.1 LED Operation......................................................................................11

5. Contacting Black Box...........................................................................12

6. Fiber Optic Cleaning Guidelines ..........................................................13

7. Electrostatic Discharge Precautions ....................................................14

Part Numbers

LGC320A-R2 724-746-5500 | blackbox.com Page 5

Part Numbers

Part Number Description Dist Power

LGC320A-R2 TX/SX-MM850-SC 550m

AC Adapter (included) +

LGC321A-R2 TX/LX-SM1310-SC 10km

AC Adapter (included) +

LGC322A-R2 TX/LX-SM1310-

/PLUS-SC 30km

AC Adapter (included) +

LGC323A-R2 TX/LX-SM1550/

LONG-SC 80km AC Adapter (included) +

LGC324A-R2

TX/SSLX-SM1310-

SC (1310xmt /

1550rcv) 15km

AC Adapter (included) +

LGC325A-R2

TX/SSLX-SM1550-

SC (1550xmt /

1310rcv) 15km AC Adapter (included) +

LGC326A-R2

TX/SSLX-SM1310/

PLUS-SC

(1310xmt / 1550rcv) 40km AC Adapter (included) +

LGC327A-R2

TX/SSLX-SM1550

/PLUS-SC

(1550xmt / 1310rcv) 40km AC Adapter (included) +

LGC328A-R2

TX/SSLX-SM1490

/LONG-SC (1490xmt

/ 1550rcv) 70km AC Adapter (included) +

LGC329A-R2

TX/SSLX-SM1550

/PLUS-SC (1550xmt /

1490rcv) 70km AC Adapter (included) +

LGC320A-NPS TX/SX-MM850-SC 550m DC only

LGC321A-NPS TX/LX-SM1310-SC 10km DC only

LGC322A-NPS TX/LX-SM1310

/PLUS-SC 30km DC only

Chapter 1: Specifications

Page 6 724-746-5500 | blackbox.com LGC320A-R2

1. Specifications

Ethernet

Connections 10/100/1000 BaseT

Auto Negotiation

AutoCross

Flow Control

1632 MTU

Full Line-Rate Forwarding

DC Input 7 to 50 VDC on DC terminal block

5 VDC on DC jack

AC Wall Adapter 100 to 240 ±10% VAC input, 5 VDC output, 2A max

Power Tray 18-Slot

AC for Miniature

Converters

125W, 20A @ 5V

Power Consumption 600mA @ 5 VDC

Operating

Temperature -13°F to +185°F (-25°C to +85°C) DC terminal

block

+14°F to +122°F (-10°C to +50°C) with Black Box

supplied AC wall adapter

Storage Temperature -40°F to +185°F (-40°C to +85°C)

Humidity 5% to 95% (non-condensing); 0 to 10,000 ft.

altitude

Dimensions 0.83"H x 1.80"W x 3.35"D (2.11 x 4.57 x 8.51 cm)

Chapter 2: Overview

LGC320A-R2 724-746-5500 | blackbox.com Page 7

2. Overview: About the Multi-Power Miniature Media Converter

10/100/1000

The Multi-Power Miniature Media Converter 10/100/1000 Auto Negotiating

switching miniature media converter. The fiber port always operates at 1000

Mbps Full Duplex; the copper port Auto negotiates the connected device’s

speed and duplex mode; 10/100/1000 Mbps Half Duplex; or 10/100/1000

Mbps Full Duplex (including Flow Control). The Multi-Power Miniature Media

Converter 10/100/1000 supports jumbo packets up to 1632 bytes.

The IE represents the unit’s use as an Industrial Ethernet device, which

allows for extended temperature operation of -25°F to +85°F (-10°C to

+50°C) when using the included AC adapter.

The Multi-Power Miniature Media Converter 10/100/1000 offers plug-and-

play operation, including the AutoCross feature which automatically selects

between a crossover workstation and straight-through repeater hub

connection depending on the connected device.

The Multi-Power Miniature Media Converter 10/100/1000 can use either the

included Black Box universal, external power adapter with 100 to 240 ±10%

VAC input, or can be wired directly to the 7 to 50 VDC terminal block (for

extended temperature configuration). There is an optional Power Tray 18-

Slot AC for Miniature Converters in which up to 18 Multi-Power Miniature

Media Converters can be installed. When installing the Multi-Power

Miniature Media Converter 10/100/1000 in an 18 slot tray or using DC power,

the temperature range supported is -13°F to +185°F (-25°F to +85°F).

Chapter 3: Install the Multi-Power Miniature Media Converter

10/100/1000

Page 8 724-746-5500 | blackbox.com LGC320A-R2

3. Install the Multi-Power Miniature Media Converter 10/100/1000

Multi-Power Miniature Media Converter 10/100/1000 installs virtually

anywhere: as a standalone device. Installation options include:

•Velcro strips

•DIN rail mounting with DIN Rail clips

•A PowerTray/18 for high density applications

NOTE

Several models of the Multi-Power Miniature Media Converter 10/100/1000 support

single-strand fiber for operation. Since single-strand fiber products use optics that

transmit and receive on two different wavelengths, single-strand fiber products must

be deployed in pairs. For example, connect a Multi-Power Miniature Media Converter

10/100/1000, TX/SSLX-SM1310-SC (which has 1310 xmt and 1550 rcv) to a product

which has 1550 xmt and 1310 rcv, e.g. High Density Media Converter System II Layer

1 Modules, TX/SSLX-SM1550-SC. The two connected products must also have the

same speed and distance capabilities (i.e. both are single-mode [20km] or both are

single/PLUS [40km]).

3.1 Powering the Multi-Power Miniature Media Converter 10/100/1000

Multi-Power Miniature Media Converter 10/100/1000 supports multiple

powering options.

•A country-specific AC power adapter (included)

•The 4-terminal DC power block

•Power Tray 18-Slot AC for Miniature Converters

•Dual USB cable

•IE-Power/5V DIN rail mount power supply

3.1.1 DC Terminal Block Wiring Instructions

The Multi-Power Miniature Media Converter 10/100/1000 can be powered via

the DC terminal block. From a power source, connect to any one positive

and any one negative terminal on the Multi-Power Miniature Media Converter

10/100/1000.

Chapter 3: Install the Multi-Power Miniature Media Converter

10/100/1000

LGC320A-R2 724-746-5500 | blackbox.com Page 9

Connected to Chassis

NOTE

When using stranded wire, the leads must be tinned and equivalent to a 16 AWG solid

conductor. The DC terminal block is protected against mis-wiring. If the unit is mis-

wired, positive power lead to the negative terminal and negative power lead to the

positive terminal, it will not function. When powering a unit with voltages near the

upper limit of the device’s specification (for example: 48 volts) take precautions to limit

the voltage at the units terminal block. When turning on high voltage DC circuits, initial

voltages may momentarily exceed the unit’s specification.

3.2 DIN Rail Mounting

The Multi-Power Miniature Media Converter

10/100/1000 ships from the factory with DIN clips,

allowing installation on a DIN rail. The Multi-Power

Miniature Media Converter 10/100/1000 mounts

perpendicular to the DIN rail (as shown).

Use the supplied screws to attach the DIN clips to

the Multi-Power Miniature Media Converter

10/100/1000, then snap the converter to the DIN

rail.

To remove the converter from the DIN rail, use a

flat-head screwdriver in the slot to gently pry the

converter from the rail.

NOTE

The DIN clips are designed for use on a DIN-35 rail.

Chapter 3: Install the Multi-Power Miniature Media Converter

10/100/1000

Page 10 724-746-5500 | blackbox.com LGC320A-R2

3.3 Cascading Power

When installing multiple

Multi-Power Miniature

Media Converter

10/100/1000 units on a

DIN rail, connect to one

DC input source and then

cascade from one DC

block to the next, until

reaching the maximum

electrical current available.

3.4 DC Power Supply Precautions

The following precautions should be observed when installing chassis with

DC power supplies.

1. Check nameplate ratings to assure there is no overloading of supply

circuits that could have an effect on overcurrent protection and supply

wiring.

2. When installing 7 to 50VDC rated equipment, it must be installed only

per the following conditions:

a. Connect the equipment to a 7 to 50VDC supply source that is

electrically isolated form the alternating current source. The 7 to 50V

DC source must be connected to a 7 to 50VDC SELV source.

b. The maximum terminal voltage is 50VDC.

c. Input wiring to terminal block must be routed and secured in such a

manner that it is protected from damage and stress. Do not route

wiring past sharp edges or moving parts.

d. A readily accessible disconnect device, with a 3mm minimum

contact gap, shall be incorporated in the fixed wiring.

3. Grounding: reliable grounding of this equipment must be maintained.

Particular attention should be given to supply connections when

connecting to power strips, rather than direct connections to the branch

circuit. The Negative Terminal is common to the grounded case.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Medienkonverter Handbücher

Black Box

Black Box PI1375A Bedienungsanleitung

Black Box

Black Box SP385A-R3 Bedienungsanleitung

Black Box

Black Box LGC5151A Bedienungsanleitung

Black Box

Black Box LE2122A-R4 Bedienungsanleitung

Black Box

Black Box MCX S7 Series Gebrauchsanweisung

Black Box

Black Box LMM101A Bedienungsanleitung

Black Box

Black Box IC238A-F Bedienungsanleitung

Black Box

Black Box LGC010A Bedienungsanleitung

Black Box

Black Box AC216A Bedienungsanleitung

Black Box

Black Box LGC5500A Gebrauchsanweisung

Black Box

Black Box IC700A Bedienungsanleitung

Black Box

Black Box LBH100A-H-SC Bedienungsanleitung

Black Box

Black Box LMC001A-R5 Bedienungsanleitung

Black Box

Black Box AVSC-VIDEO-HDMI Kurzanleitung

Black Box

Black Box LMC11002A Bedienungsanleitung

Black Box

Black Box AC150A-4 Bedienungsanleitung

Black Box

Black Box IC350A Bedienungsanleitung

Black Box

Black Box IC470A Bedienungsanleitung

Black Box

Black Box LH1706A-SC-US Bedienungsanleitung

Black Box

Black Box AC1056A-2 Bedienungsanleitung

Black Box

Black Box IC1473A-F Bedienungsanleitung

Black Box

Black Box LMC543C Bedienungsanleitung

Black Box

Black Box LPD500A Bedienungsanleitung

Black Box

Black Box IC476A-F-R2 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung