Black Box JPM440A Bedienungsanleitung

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746

Installation

Use the splice tray with single-mode or multimode fiber cable. Follow the instructions below.

SINGLE-MODE SPLICING

1. Remove the top metal splice tray cover and install the bottom metal splice cover in the wallmount or

rackmount fiber cabinet.

2. Remove the single-mode plastic covers on each of the four single-mode plastic bases already installed in

the bottom metal splice cover.

3. Remove the yellow sticker from one of the single-mode plastic bases.

4. Install a metal sleeve and slide the single-mode fiber through it that you plan to splice. (For single-mode

fiber, you’ll use fusion splicing.)

5. Prepare and splice the fiber.

6. After splicing is complete, snap the spliced fiber in one of the 6 compartment areas in the plastic base.

7. Repeat until all 6 compartments are filled.

8. Re-install the single-mode plastic cover.

9. Repeat steps 2 through 8 for the remaining three single-mode plastic bases as required by your

application.

10. When all single-mode plastic bases are loaded with fiber, use the cable ties to secure the cable. Then

re-install the top metal splice tray cover and tighten the wing nuts (included with the cabinet).

MULTIMODE SPLICING

1. Remove the top metal splice tray cover and install the bottom metal splice cover in the wallmount or

rackmount fiber cabinet.

2. Remove the single-mode plastic covers on each of the four single-mode plastic bases already installed.

3. Remove the larger single-mode plastic bases and install the smaller multimode plastic bases in the bottom

metal splice cover. (The multimode plastic base supports the Corning Cable Systems Non-Adhesive

Mechanical Splice, Corning part number 95-000-04 or Black Box part number FO030.)

4. Splice the multimode fiber. (For multimode fiber, you’ll use mechanical splicing.)

5. After the mechanical splice is done, install the mechanical splice in one of the 6 compartments in the

multimode plastic base.

6. Repeat until all 6 compartments are filled.

7. Re-install the multimode plastic cover.

8. When all multimode plastic bases are loaded with fiber, use the cable ties to secure the cable. Then

re-install the top metal splice cover and tighten the wing nuts (included with the cabinet) to secure the

cable.

TRADEMARKS USED IN THIS MANUAL

Any trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

CUSTOMER

SUPPORT

INFORMATION

JUNE 2004

JPM440A

Splice Tray

Specifications

Size: 0.5"H x 9.4"W x 5.5"D (1.3 x 23.8 x 14 cm)

Weight: 0.8 lb. (0.4 kg)

Overview

The Splice Tray can splice up to 24 strands of single-mode or multimode fiber. It’s used with the Wallmount

Fiber Cabinets [JPM401A-R2–402A-R2] and the Rackmount Fiber Cabinets [JPM406A-R2–407A-R2 and

JPM418A-R2].

What’s Included

Your package should include the following items. If anything is missing or damaged, please contact Black Box

at 724-746-5500.

• (1) top metal splice cover

• (1) bottom metal splice cover

• (25) metal sleeves for single-mode splicing

• (4) single-mode plastic covers and bases (already installed in the bottom splice cover)

• (4) multimode plastic covers and bases

• (30) 3" (7.6-cm) cable ties

• (4) yellow stickers attached to the single-mode plastic bases

Bottom metal

splice cover

Yellow sticker

Single-mode plastic

base

Inhaltsverzeichnis

Andere Black Box Netzwerk-Hardware Handbücher

Black Box

Black Box MT1500A Bedienungsanleitung

Black Box

Black Box JPM260 Bedienungsanleitung

Black Box

Black Box ICOMP Bedienungsanleitung

Black Box

Black Box MC144A Bedienungsanleitung

Black Box

Black Box PI1375A Bedienungsanleitung

Black Box

Black Box TL572A Bedienungsanleitung

Black Box

Black Box COE-8I Bedienungsanleitung

Black Box

Black Box IC457A-F Bedienungsanleitung

Black Box

Black Box SW543A Bedienungsanleitung

Black Box

Black Box Time-Division Multiplexor Bedienungsanleitung

Black Box

Black Box LB9218A Bedienungsanleitung

Black Box

Black Box Balun G.703 Bedienungsanleitung

Black Box

Black Box VIDEO CCTV-A/V HUB Bedienungsanleitung

Black Box

Black Box LrA502A-et-r5 Bedienungsanleitung

Black Box

Black Box LD485A-MP Bedienungsanleitung

Black Box

Black Box CSU/DSU Bedienungsanleitung

Black Box

Black Box DT450A Bedienungsanleitung

Black Box

Black Box LWS100AE Bedienungsanleitung

Black Box

Black Box CMA005A Bedienungsanleitung

Black Box

Black Box EncrypTight Bedienungsanleitung

Black Box

Black Box FX6412NA Bedienungsanleitung

Black Box

Black Box SW591C Bedienungsanleitung

Black Box

Black Box EME149A-20 Bedienungsanleitung

Black Box

Black Box FT990A Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung