Black Box LR1530A-EU-R3 Bedienungsanleitung

Series 500

Frame Relay/Leased Line

Bridge/Router

User and System Administration Guide

LR1530A-R3, LR1530A-EU-R3, LR1531A-R2, LR1535A-R2

5500099-10 equivalent to

5500086-12

Federal Communications Commission (FCC)

Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his own expense.

Warning: The user is cautioned that modifications to this equipment can void the

authority granted by the FCC to operate the equipment.

Canadian Emissions Standard ICES-003

This digital apparatus does not exceed the Class A limits for radio noise emissions

from digital apparatus as set out in the interference-causing equipment standard

entitled “Digital Apparatus”, ICES-003 of the Department of Communications.

Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux

appareils numériques de Classe A prescrites dans la norme sur le matériel brouilleur:

“Appareils Numériques”, NMB-003 édictée par le ministre des Communications.

Specifications

Speed — Ethernet: LAN 10 Mbps, WAN up to 2.048 Mbps

Protocol — IP & IPX Multi-Protocol router capabilities; Protocol-

independent MAC-layer bridging; SNMP terminal access

Indicators — (4) LEDs: Power, LAN, Tx, Rx

Connectors — DB25 female (model 1530A-R2 Universal or model

1530A V.35 WAN); RJ45 female (model 1531A 56/64K CSU/DSU

WAN and model 1535A T1/E1 CSU/DSU WAN); RJ45 female

10BaseT (LAN); RJ45 female console port

Power — 12VDC 1A (external) – center positive

Size — 1.6"H x 6.1"W x 4.3"D (4 x 15.5 x 11 cm)

Weight — 15 oz. (500 g);

INSTRUCCIONES DE SEGURIDAD

(Normas Oficiales Mexicanas Electrical Safety Statement)

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el

aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia

futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación

deben ser respetadas.

4. Todas las instrucciones de operación y uso deben ser seguidas.

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la

tina de baño, lavabo, sótano mojado o cerca de una alberca, etc.

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean

recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea

recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá a lo

descrito en las instrucciones de operación. Todo otro servicio deberá ser referido

a personal de servicio calificado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no interfiera su

uso. La colocación del aparato eléctrico sobre una cama, sofá, alfombra o

superficie similar puede bloquea la ventilación, no se debe colocar en libreros o

gabinetes que impidan el flujo de aire por los orificios de ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como

radiadores, registros de calor, estufas u otros aparatos (incluyendo amplificadores)

que producen calor.

11. El aparato electico deberá ser connectado a una fuente de poder sólo del tipo

descrito en el instructivo de operación, o como se indique en el aparato.

12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del

equipo no sea eliminada.

13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean

pisados ni pellizcados por objectos colocados sobre o contra ellos, poniendo

particular atención a los contactos y receptáculos donde salen del aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las

recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas de

energia.

16. El cable de corriente deberá ser desconectado del cuando el equipo no sea usado

por un largo periodo de tiempo.

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados

sobre la cubierta u orificios de ventilación.

18. Servicio por personal calificado devera ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en su

desempeño; o

El aparato ha sido tirado o su cubierta ha sido dañada.

Using This Manual

This Installation and Applications Guide provides the basic information

required to initially set up and configure the router. This guide is organized

into the following sections:

“Installation” provides instructions for installing the router.

“Typical Applications & How to Configure Them” provides

simple configuration examples for typical applications in which the

router might be used. The applications described in this document are

for example only and provide a method of quick configuration of the

router. For more complete information on all of the configuration

parameters available, please refer to the PPP Menu Reference Manual

on the accompanying CD-ROM.

“Introduction to Filtering” provides an introduction to the pattern

filtering options of the router. Several examples of typical pattern

filters are also provided.

”Menu Trees” provides a graphical tree type overview of the

structure of the built-in menu system of the router. All of the

configuration is performed using the options provided in the menu

system. The Menu Tree is like an index to the menu options.

“Configuration Pages” provides a place to note the current

configuration of the router for future reference. If a replacement unit

is required, the configuration may be quickly modified to be the same

as the existing unit.

“Octet Locations on Ethernet Frames” provides a graphical

representation of the various common Ethernet frames that the router

will bridge or route. When defining a pattern filter, these frame

displays indicate the offset values to use in order to define the pattern

filter correctly.

“Servicing Information” provides information on opening the case

and changing the straps.

Using the Electronic Reference Manual

The router Reference Manuals are provided as Adobe Acrobat PDF

files on the accompanying CD-ROM. The PPP Menus Reference File

is provided individually for ease of configuration reference.

The Adobe Acrobat Reader program is included on the CD-ROM. It is

also available for most computer operating platforms from Adobe on

the Internet at: www.adobe.com.

The Reference Manual provides the following information:

•Introduction to bridging, routing, and router features

•Pin out references for the link modules

•List of event and alarm logs

•Expanded description of programmable filtering

The router PPP Menus Reference Manual provides the following

information:

•Complete description of the options for the built-in menu

system.

Contents

1 - INSTALLATION 5

Unpack the router 5

Select a Site 5

Identify the Connectors 6

Connect to the Console 7

Make the LAN Connections 7

Make the WAN Link Connection 7

Power Up the router 9

Mandatory Configuration 10

Setting the Link Interface Type (Universal WAN only) 11

Setting the T1/E1Parameters (T1/E1 WAN only) 12

Identify the Status LEDs 15

2 - TYPICAL APPLICATIONS & HOW TO CONFIGURE

THEM 17

Managing the router Using Menus 18

Conventions 19

Basic Frame Relay Configuration 20

Auto Learning the Frame Relay Configuration 22

Manual Configuration - LMI Type 23

“Quick Start” Frame Relay 24

Basic Leased Line Configuration 26

“Quick Start” PPP Leased Line Connections 26

Should You Bridge or Route? 29

Configure as an Ethernet Bridge 30

Configure as an Ethernet IP router 33

Define an IP Default Gateway 35

Define an IP Static Route 36

Define an IP Subnet Mask 37

Configure as an Ethernet IPX router 40

Novell Servers in Both Locations 40

Novell Servers in One Location Only 42

PPP Link Configuration Overview 44

Numbered Links 44

Unnumbered Links 45

Configure Dynamic Host Configuration Protocol 46

Configure Network Address Translation (NAT) 48

Configure PPP Security 50

Configure Firewall 52

3 - INTRODUCTION TO FILTERING 57

MAC Address Filtering 57

Pattern Filtering 58

Popular Filters 61

Bridge 61

IP & Related Traffic 61

Novell IPX Frames 61

NetBIOS &NetBEUI (Microsoft Windows) 61

Banyan 62

IP router 62

NetBIOS over TCP 62

Other interesting TCP Ports 62

APPENDIX A MENU TREES 63

APPENDIX B OCTET LOCATIONS ON ETHERNET

FRAMES 67

Octet Locations on a Bridged TCP/IP Frame 68

Octet Locations on a Bridged Novell Netware Frame 68

ETHERNET Type Codes 69

Octet Locations on an IP Routed TCP/IP Frame 70

Octet Locations on an IPX Routed Novell Netware Frame 70

Octet Locations on a Bridged XNS Frame 71

APPENDIX C SERVICING INFORMATION 73

Opening the case 73

Identifying the Internal Components 74

Sanity Timer 76

Force ZMODEM Software Load 76

To Clear a “Lost” Password 76

Connecting to the Console Connector 77

WAN Interface Connection 78

Pinout Information 78

V.35 Module: 78

CSU/DSU Module: 78

T1/E1 Module: 79

UNIVERSAL WAN Module: 80

V.35 Link Pinouts 81

RS232C / V.24 Link Pinouts 83

RS530 / RS422 Link Pinouts 84

V.11 / X.21 Link Pinouts 85

Contents

V.11 / X.21 DB25 to DB15 Connector Cable 86

V.35 Null-Modem Cable Configuration 87

The link speed must be defined for each of the two units. 87

RS232 / V.24 Null-Modem Cable 88

RS530 / RS422 Null-Modem Cable 89

APPENDIX D SOFTWARE UPGRADES 91

* * * *

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Netzwerk-Router Handbücher

Black Box

Black Box Firetunnel 30 LRE1030E Bedienungsanleitung

Black Box

Black Box VOE231 Bedienungsanleitung

Black Box

Black Box InvisaPC DTX1000-T Bedienungsanleitung

Black Box

Black Box LGH1006A Bedienungsanleitung

Black Box

Black Box LR120A Bedienungsanleitung

Black Box

Black Box LB9213A Bedienungsanleitung

Black Box

Black Box LB9002A-SC-R3 Bedienungsanleitung

Black Box

Black Box LR120A Bedienungsanleitung

Black Box

Black Box LGB316A-R2 Bedienungsanleitung

Black Box

Black Box LRA001A-R2 Bedienungsanleitung

Black Box

Black Box Series 500 Bedienungsanleitung

Black Box

Black Box LB308A Bedienungsanleitung

Black Box

Black Box LR9501A Bedienungsanleitung

Black Box

Black Box LEH1008A Bedienungsanleitung

Black Box

Black Box LB611A Bedienungsanleitung

Black Box

Black Box LR5000A Bedienungsanleitung

Black Box

Black Box LB8418A Bedienungsanleitung

Black Box

Black Box COS-4P Bedienungsanleitung

Black Box

Black Box Nortel Secure 1001 Bedienungsanleitung

Black Box

Black Box LR0002A-BSDN Bedienungsanleitung

Black Box

Black Box LR5100A-T Bedienungsanleitung

Black Box

Black Box LW001A Bedienungsanleitung

Black Box

Black Box LEH908A Bedienungsanleitung

Black Box

Black Box LRU4240 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise