Black Box RM044 Bedienungsanleitung

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746

VPN: ISBBRM044

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

CUSTOMER

SUPPORT

INFORMATION

JULY 2000

RM044 RM430A

RM330A-R3 RM431

RM331 RM432

RM332A RM630A

RM349A RM631A

RM378

Aluminum Distribution Racks

Aluminum Distribution Rack Raceways

Center Weight Shelves

CONTENTS

Contents

1. Aluminum Distribution Racks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.1 Available Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.2 What’s Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.3 What You’ll Need to Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.4 Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2. Aluminum Distribution Rack Raceways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.1 Available Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.2 What’s Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.3 What You’ll Need to Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.4 Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3. Center Weight Shelves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.1 Available Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.2 What’s Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.3 What You’ll Need to Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.4 Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

TRADEMARKS USED IN THIS MANUAL

Any trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

ALUMINUM DISTRIBUTION RACKS, RACEWAYS, AND ACCESSORIES

1. Aluminum Distribution Racks

1.1 Available Models

The following models are available:

• Black Aluminum Distribution Rack, 47" (24U), 10/32 tapped holes (part number RM332A)

• Mill Aluminum Distribution Rack, 66" (35U), 10/32 tapped holes (part number RM349A)

• Black Aluminum Distribution Rack, 84" (45U), 10/32 tapped holes (part number RM330A-R3)

• Black Aluminum Distribution Rack, 84" (45U), 12/24 tapped holes (part number RM630A)

• Mill Aluminum Distribution Rack, 84" (45U), 10/32 tapped holes (part number RM430A)

• Mill Aluminum Distribution Rack, 84" (45U), 12/24 tapped holes (part number RM631A)

1.2 What’s Included

Make sure you have the following parts before assembling the Rack.

• (2) vertical upright channels

• (2) base angles

• (2) top angles

• (12) 1⁄2"-13 x 1 hex-head bolts

• (12) 1⁄2" lockwashers

1.3 What You’ll Need to Supply

• 3⁄4" socket or wrench

1.4 Installation Instructions

STEP 1: Attach the top angle to the vertical upright channels. (See Figure 1-1.)

A. Lay the vertical upright channels on edge so the tapped holes face you and the floor. Be sure that open

sides of the upright channels face each other.

B. Align the holes in the top angle with the corresponding holes in the vertical uprights. The formed leg of

the top angle should be facing you.

C. Install the two hex-head bolts and lockwashers. Finger-tighten only.

CHAPTER 1: Aluminum Distribution Racks

Figure 1-1. Step 1: Attaching the Top Angle to the Vertical Channel Uprights.

Top Angle

Vertical Upright

Channel

Bolt

Lockwasher

ALUMINUM DISTRIBUTION RACKS, RACEWAYS, AND ACCESSORIES

STEP 2: Attach the base angles to the vertical upright channels. (See Figure 1-2.)

A. Leaving the vertical upright channels on edge, align the holes in the base with the corresponding holes in

each upright channel. The long leg of the base should be facing you.

B. Install four hex-head bolts and lockwashers. Finger-tighten only.

C. Turn the vertical upright assembly over (rotate 180°) and repeat steps A and B. Finger-tighten only.

Figure 1-2. Step 2: Attaching the Base Angles to the Vertical Upright Channels.

Vertical Upright

Channel

Vertical Upright

Channel

Bolts

Lockwashers

Base

Angle

Base Angle

CHAPTER 1: Aluminum Distribution Racks

STEP 3: Final tightening. (See Figure 1-3.)

A. Stand the frame upright.

B. Square the unit using a level or a carpenter’s square.

C. Tighten all bolts using a socket wrench or a wrench.

Figure 1-3. Step 3: Final Tightening.

STEP 4: Secure the frame to the floor.

All frames should be bolted to the floor or to an equally stabilizing and secure surface. Determine the desired

location and secure the frame.

STEP 5: Equipment installation.

Your rack is now ready for installing equipment and panels.

Top Angle

Vertical Upright

Channel Vertical Upright

Channel

Bolt

Bolts

Bolt

Base Angle

ALUMINUM DISTRIBUTION RACKS, RACEWAYS, AND ACCESSORIES

2. Aluminum Distribution Rack

Raceways

2.1 Available Models

The following models are available:

• Mill Aluminum Distribution Raceway for RM349A (part number RM378)

• Black Aluminum Distribution Raceway for RM330A-R3 and RM630A (part number RM044)

• Mill Aluminum Distribution Raceway for RM430A and RM631A (part number RM432)

2.2 What’s Included

Make sure you have the following parts before installing the Aluminum Distribution Rack Raceway.

• (1) Aluminum Distribution Rack Raceway • (6) 1⁄2-13" lockwashers

• (6) 1⁄2-13 x 1" hex-head bolts • (6) 1⁄2" hexnuts

2.3 What You’ll Need to Supply

•3⁄4" socket or wrench

2.4 Installation Instructions

NOTE

This Rack Raceway attaches to each networking frame with 2 bolts, lockwashers, and

hexnuts. After you’ve properly installed the Rack, you’ll have 2 extra bolts,

lockwashers, and hexnuts left over.

A. Align the holes in the Aluminum Distribution Rack Raceway with the holes in the networking frames and

attach them with the hex-head bolts, lockwashers, and hexnuts and tighten. (See Figure 2-1 on the next

page.)

B. Pull the knob on the cable gates to remove them from the Rack. Re-attach by pushing the knob in until it

locks.

CHAPTER 2: Aluminum Distribution Rack Raceways

Figure 2-1. Aluminum Distribution Rack Raceway.

Hex-head Bolt

Lockwasher

Hexnut

Aluminum Distribution

Rack Raceway

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Rack & Stand Handbücher

Black Box

Black Box KVXLC-RMK Bedienungsanleitung

Black Box

Black Box RM390A-R2 Bedienungsanleitung

Black Box

Black Box ServCenter RF500A Bedienungsanleitung

Black Box

Black Box Freedom Rack Plus Bedienungsanleitung

Black Box

Black Box RM110A Bedienungsanleitung

Black Box

Black Box RM202 Bedienungsanleitung

Black Box

Black Box WMD12-2425-PQU Bedienungsanleitung

Black Box

Black Box WMD-24PMOUNT-U Bedienungsanleitung

Black Box

Black Box RM490A-R2 Bedienungsanleitung

Black Box

Black Box Agility Bedienungsanleitung

Black Box

Black Box ServCenter RF535A Bedienungsanleitung

Black Box

Black Box MicroRACK RM216 Bedienungsanleitung

Black Box

Black Box RM260 Bedienungsanleitung

Black Box

Black Box Rackmount Computer Monitor Mount Bedienungsanleitung

Black Box

Black Box RM155A-R2 Bedienungsanleitung

Black Box

Black Box RM7006 Bedienungsanleitung

Black Box

Black Box MT160A Bedienungsanleitung

Black Box

Black Box RM069A Bedienungsanleitung

Black Box

Black Box NetRack RM500A-R2 Bedienungsanleitung

Black Box

Black Box RMK19K Bedienungsanleitung

Black Box

Black Box RMT029 Bedienungsanleitung

Black Box

Black Box RM110A Bedienungsanleitung

Black Box

Black Box RMS1924F Bedienungsanleitung

Black Box

Black Box RM970A Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung