Black Box ServTray KVT201A-JP-R3 Bedienungsanleitung

BL A C K B OX®

Control your rack- or cabinet-mounted PS/2 server

with the compact, easy-to-use ServTray.

Consists of a keyboard, mouse, 15" or 17" LCD panel, and KVM module

housed in an industry-standard 19", 1U-height rack drawer.

ServTray™

KVT201A-JP-R3

KVT202A-JP-R3

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: info@blackbox.com

Customer

Support

Information

724-746-5500 | blackbox.com

Page 2

724-746-5500 | blackbox.com

ServTray

Federal Communications Commission and Industry Canada Radio Frequency Interference

Statements

Class B Digital Device. This equipment has been tested and found to comply with the limits for a Class B computing device pur-

suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a res-

idential installation. However, there is no guarantee that interference will not occur in a particular installation. This equipment gen-

erates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. If this equipment does cause harmful interference to radio or telephone reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

To meet FCC requirements, shielded cables and power cords are required to connect this device to a personal computer or other

Class B certified device.

This digital apparatus does not exceed the Class B limits for radio noise emission from digital apparatus set out in the Radio

Interference Regulation of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de

classe B prescrites dans le Règlement sur le brouillage radioélectrique publié par Industrie Canada.

724-746-5500 | blackbox.com

724-746-5500 | blackbox.com Page 3

NOM Statement

Instrucciones de Seguridad

(Normas Oficiales Mexicanas Electrical Safety Statement)

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas.

4. Todas las instrucciones de operación y uso deben ser seguidas.

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina de baño, lavabo, sótano mojado o cerca

de una alberca, etc.

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá a lo descrito en las instrucciones de operación.

Todo otro servicio deberá ser referido a personal de servicio calificado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no interfiera su uso. La colocación del aparato eléctrico

sobre una cama, sofá, alfombra o superficie similar puede bloquea la ventilación, no se debe colocar en libreros o gabinetes

que impidan el flujo de aire por los orificios de ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como radiadores, registros de calor, estufas u otros

aparatos (incluyendo amplificadores) que producen calor.

11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como

se indique en el aparato.

12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada.

13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados

sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas de energia.

16. El cable de corriente deberá ser desconectado del cuando el equipo no sea usado por un largo periodo de tiempo.

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación.

18. Servicio por personal calificado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en su desempeño; o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

724-746-5500 | blackbox.com

Page 4

724-746-5500 | blackbox.com

ServTray

Trademarks Used in this Manual

Black Box and the Double Diamond logo are registered trademarks, and ServTray and ServSwitch are trademarks,

of BB Technologies, Inc.

Centronics is a registered trademark of Centronics Corporation.

UL is a registered trademark of Underwriters Laboratories Inc.

Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

We‘re here to help! If you have any questions about your application

or our products, contact Black Box Tech Support at 724-746-5500

or go to blackbox.com and click on “Talk to Black Box.”

You’ll be live with one of our technical experts in less than 20 seconds.

724-746-5500 | blackbox.com

724-746-5500 | blackbox.com Page 5

Table of Contents

Chapter Page

1. Specifications ..............................................................................................................................................................................................6

2. Overview.....................................................................................................................................................................................................7

2.1 Introduction........................................................................................................................................................................................7

2.2 What’s Included..................................................................................................................................................................................7

2.3 Rear Bracket Extensions......................................................................................................................................................................8

3. Assembly and Installation..........................................................................................................................................................................10

4. Operation..................................................................................................................................................................................................16

5. Troubleshooting ........................................................................................................................................................................................ 17

5.1 Calling Black Box ..............................................................................................................................................................................17

5.2 Shipping and Packaging ................................................................................................................................................................... 17

724-746-5500 | blackbox.com

Page 6

724-746-5500 | blackbox.com

ServTray

1. Specifications

Approvals: CE, FCC for the product; UL®, TUV, CE for power supply

Active Display Area: KVT201A-JP-R3: 9"H x 12"W (22.8 x 30.4 cm);

KVT202A-JP-R3: 10.6"H x 13.3"W (27 x 33.8 cm)

Pixel Pitch: KVT201A-JP-R3: 0.297 mm (H) x 0.297 mm (V);

KVT202A-JP-R3: 0.264 mm (H) x 0.264 mm (V)

Resolution: KVT201A-JP-R3: 1024 x 768 @ 60 Hz;

KVT202A-JP-R3: 1280 x 1024 @ 60 Hz

NOTE: For optimum video performance, VGA resolution should be set to 1024 x 768 (for the KVT201A-JP-R3) or 1280 x 1024 (for

the KVT202A-JP-R3).

Display Mode: Normally white

Brightness (cd/m^2): 250 (center)

Contrast Ratio (typical): KVT201A-JP-R3: 350:1;

KVT202A-JP-R3: 450:1

Display Color (RGB 6-bit data): 262 K colors

Input Signal: RGB analog, H/V separate

Plug-n-Play VESA: VESA DDC 1/2B

Viewing Angle (typical): KVT201A-JP-R3: -70 to +70 (H), -60 to +60 (V);

KVT202A-JP-R3: -80 to +80 (H), -80 to +80 (V)

Backlight Unit: KVT201A-JP-R3: 2 CCFLs edge-light (top/bottom);

KVT202A-JP-R3: 4 CCFLs edge-light (top/bottom)

Connectors: (1) Centronics®female, (2) 6-pin mini DIN, (1) HD15, (1) barrel connector for power

Temperature: Operating: 32 to 122° F (0 to 50° C);

Storage: -4 to +140° F (-20 to +60° C)

Humidity (Relative): 95%

Power Consumption (maximum, typical): KVT201A-JP-R3: 33 watts;

KVT202A-JP-R3: 37 watts

Power: 12 VDC (from external 100–240-VAC power adapter), 47–63 Hz

Size: KVT201A-JP-R3: 1.75"H (1U) x 15"W x 19.5" to 39.5"D (4.4 x 38.1 x 49.5 to 100.3 cm);

KVT202A-JP-R3: 1.75"H (1U) x 17"W x 19.5" to 39.5"D (4.4 x 43.2 x 49.5 to 100.3 cm)

Weight: KVT201A-JP-R3: 21 lb. (9.5 kg);

KVT202A-JP-R3: 23 lb. (10.4 kg)

724-746-5500 | blackbox.com

724-746-5500 | blackbox.com Page 7

Chapter 2: Overview

2. Overview

2.1 Introduction

Control your rack- or cabinet-mounted PS/2 server with the compact, easy-to-use ServTray. It consists of a keyboard (Japanese

version), mouse, LCD panel, and KVM module housed in an industry-standard 19", 1U-height console drawer (see Figure 2-1).

Two models are available: the ServTray with a 15" LCD panel (KVT201A-JP-R3) and the ServTray with a 17" LCD panel

(KVT202A-JP-R3). Both models feature a full 105-key, low-profile, sturdy keyboard and touch pad with an ergonomically designed

hand rest. The KVT201A-JP-R3 has a maximum resolution of 1024 x 768, and the KVT202A-JP-R3 has a maximum resolution of

1280 x 1024.

Install the ServTray in racks or cabinets that are 23.7"D to 45.3"D (60.2 to 115.1 cm). Before installing the ServTray, you’ll need a

Universal Rear Bracket Extension Kit (described in Section 2.3).

A single-port KVM module is included with the ServTray. To control more than one PS/2 server, connect the ServTray to a

ServSwitch™.

The KVM module comes with a universal Centronics 36-pin connector; use it to connect the module to the console drawer. On

the opposite side of the KVM module are two 6-pin mini DIN connectors and one HD15 connector to connect directly to a PS/2

computer or to a ServSwitch console ports. Finally, the module has a barrel connector for power. The 0.12" x 0.24" screws listed

in Section 2.2 secure the Universal Rear Bracket Extension Kit to the KVM module. The 0.19" x 0.43" screws are used in place of

10-32 or 12-24 screws if required by your rack.

1U slide drawer with

keyboard (Japanese

version), touch pad, and

15" or 17" LCD monitor

KVM

module

Universal rear bracket

extension kit

Figure 2-1. ServTray components (left to right): Universal Rear Bracket Extension Kit, KVM Module, and 1U slide drawer.

2.2 What’s Included

• (1) ServTray console (15" or 17" LCD panel, keyboard [Japanese version], and mouse pad)

• (1) KVM module with power supply

• (1) Universal rear bracket extension kit

• (1) PS/2 CPU cable

• (10) 0.19" x 0.43" (0.5 x 1.1 cm) screws

• (10) 0.12" x 0.24" (0.3 x 0.6 cm) screws

• This user’s manual

Accessories that you might or need to purchase include:

• 12-24 or 10-32 nuts/bolts

724-746-5500 | blackbox.com

Page 8

724-746-5500 | blackbox.com

ServTray

2.3 Rear Bracket Extensions

Figure 2-2 shows the rear bracket pair, and Figures 2-3 and 2-4 show the ServTray in its maximum and minimum extension

positions.

Figure 2-2. Rear bracket pair.

NOTE: The following length is the depth measured between the front pole and rear pole inside a 4-post rack or cabinet, not the

outside depth of the enclosure.

45.3"

(115.1 cm )

Figure 2-3. The maximum depth of the unit.

23.7"

(60.2 cm)

Figure 2-4. The minimum depth of the unit.

724-746-5500 | blackbox.com

724-746-5500 | blackbox.com Page 9

Chapter 2: Overview

Open rack

ServTray

Figure 2-5. ServTray installed on an open rack.

724-746-5500 | blackbox.com

Page 10

724-746-5500 | blackbox.com

ServTray

3. Assembly and Installation

1. Choose a proper position in the cabinet for the console drawer.

2. Using four 0.12" x 0.24" countersunk screws (included), attach the extensions (included with your ServTray Kit) to both sides

of the KVM switch module. See Figures 3-1 through 3-5. The wide-edged plastic extension should be on the top side (see

Figure 3-5).

Rear brackets

Extensions

Figure 3-1. Rear brackets and extensions.

KVM module

Extension

(4) counter-sunk

screws

Figure 3-2. Attaching the extensions to the KVM module.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Server Handbücher

Black Box

Black Box LES4011 Bedienungsanleitung

Black Box

Black Box iCOMPEL ICC LG WEBOS 3 Bedienungsanleitung

Black Box

Black Box LWS401A Bedienungsanleitung

Black Box

Black Box RM5000A-R3 Bedienungsanleitung

Black Box

Black Box LES1101A-R2 Bedienungsanleitung

Black Box

Black Box LES1108A Bedienungsanleitung

Black Box

Black Box LEU9070 Bedienungsanleitung

Black Box

Black Box LS1016A Bedienungsanleitung

Black Box

Black Box ServShield RM470A-R2 Bedienungsanleitung

Black Box

Black Box LWS401A Bedienungsanleitung

Black Box

Black Box LES301A-KIT Bedienungsanleitung

Black Box

Black Box Advanced Console Server Bedienungsanleitung

Black Box

Black Box LS4103A Bedienungsanleitung

Black Box

Black Box Industrial Ethernet Serial Server LES401A... Bedienungsanleitung

Black Box

Black Box LES1101A-R2 Bedienungsanleitung

Black Box

Black Box LWS401A Bedienungsanleitung

Black Box

Black Box LES2702A-WL Bedienungsanleitung

Black Box

Black Box LES424A Bedienungsanleitung

Black Box

Black Box 40870-R2 Bedienungsanleitung

Black Box

Black Box LES431A Bedienungsanleitung

Black Box

Black Box LE2101A-BT-R2 Bedienungsanleitung

Black Box

Black Box LS1016A Bedienungsanleitung

Black Box

Black Box Usb Peripheral Server/5 Bedienungsanleitung

Black Box

Black Box LES302A Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung