Black Box LES1101A-R2 Bedienungsanleitung

BL A C K B O X®

Quick Start Guide

1101 Secure Device Server

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax

724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,

PA 15055-1018 • Web site: www.blackbox.com • E-mail: [email protected]

Customer

Support

Information

LES1101A-R2

Page 2 724-746-5500 | blackbox.com

1101 Secure Device Server Quick Start Guide

TRADEMARKS USED IN THIS MANUAL

Black Box and the Double Diamond logo are registered trademarks of

BB Technologies, Inc.

Linux is a registered trademark of Linus Torvalds.

Nagios is a registered trademark of Nagios Enterprises.

Windows is a registered trademark of Microsoft Corporation.

Any other trademarks mentioned in this manual are acknowledged to be

the property of the trademark owners.

About this Guide

This Quick Start Guide walks you through installation, configuration, and local

operation. For more details, refer to the user manual.

To download the user manual, go to ftp://ftp.blackbox.com/anonymous/

manuals/L/LES1101A-R2_USER_rev2.pdf or visit the Black Box Web site

(www.blackbox.com) and enter LES1101A-R2 in the search bar.

Step 1: Check kit contents.

• 1101 Secure Device Server

• This printed quick start guide

• CD-ROM containing SDT Connector and PortShare software

• Universal input 12-VDC power pack

Step 2: Connect the hardware.

• Plug the power pack into the AC power receptacle and connect the DC power

cable to the 12-VDC power socket on the LES1101A-R2.

• Connect the LES1101A-R2 LAN port to your network.

• Connect your serial device to the serial port on the DB9 male connector.

• By default, the LES1101A-R2 is configured in RS-232 mode. RS-232, RS-422,

and RS-485 are software-selectable. Simply press the button to Reset the unit

back to factory default (RS-232 mode),

Page 3

724-746-5500 | blackbox.com

1101 Secure Device Server Quick Start Guide

The DB9 pinouts for the modes are shown below.

DB9 pinouts.

Pin Mode

RS-232 RS-422 RS-485

1 DCD — —

2 RXD RX - —

3 TXD TX + D+

4 DTR — —

5 GND GND GND

Figure 1. Reset button. 6 DSR RX + —

7 RTS TX - D-

8 CTS — —

9 — RS-422 422/485 SELECT

Step 3: Set up the serial device server.

The default serial device server IP address is 192.168.0.1 (subnet mask

255.255.255.0).

With a Web browser on any computer that is connected to the serial device server

through the LAN:

• Enter https://192.168.0.1 into the address bar.

NOTE: The LAN-connected computer must have an IP address in the same

network range (192.168.0.xxx) as the serial device server. If this is not

convenient, you can use the ARP Ping command to set the IP address (refer

to the user manual for details). The serial device server also has its DHCP

client enabled by default, so it will automatically accept any network IP

address assigned by any DHCP server on your network—and will then

respond at both 192.168.0.1 and its DHCP address.

• Log in using the default system user name root and the default password

default. A Welcome screen listing the basic configuration steps is displayed.

• Select “System: Administration,” enter and confirm a new System Password,

and click “Apply.”

Page 4 724-746-5500 | blackbox.com

1101 Secure Device Server Quick Start Guide

• To assign your serial device server a static IP address or to permanently enable

DHCP, select “System: IP” then “Network Interface” and check “DHCP” or

“Static” for configuration method.

Step 4: Configure serial and network devices.

• Select “Serial & Network: Serial Port,” which will display the label, mode, and

protocol options currently set.

• To configure the serial port, click “Edit.”

Serial & Network: Serial Port screen.

• Configure the Common Settings (baud rate, parity, data bits, stop bits, and flow

control) to match those of the serial device being controlled.

• By default, the LES1101A-R2 is configured in RS-232 mode. RS-232, RS-422, and

RS-485 are software-selectable. Simply press the button to Reset the unit back

to factory default (RS-232 mode).

• By default, the serial port is in console server mode. Refer to the user manual for

configuring other modes (terminal server, SDT, serial bridging).

• In Console Server Settings, select the protocols (Telnet, SSH, TCP, RFC2217,

unauthenticated Telnet) that are to be used for the data connection to the

device server and the serial port.

Page 5

724-746-5500 | blackbox.com

1101 Secure Device Server Quick Start Guide

• You may also wish to set the logging level, which specifies the details of the

communications that will be logged and monitored for this serial port. By

default, logging is disabled.

• Click “Apply.”

Step 5: Add new users.

NOTE: We recommend that you set up a new Administrator user (in the admin

group with full access privileges) and log in as this new user for all ongo-

ing administration functions (rather than continuing as root).

• For each new user, select “Serial & Network: Users & Groups” and click “Add

User.”

• Enter a username and enter and confirm a password, and nominate the accessi-

ble hosts and accessible ports the user is allowed to access.

Serial & Network: Users & Groups screen.

• To grant limited access to the management console, check the “User” group.

To grant full access to the management console, check the “Admin” group.

By default, the user is granted no management console access.

• Click “Apply.”

Page 6 724-746-5500 | blackbox.com

1101 Secure Device Server Quick Start Guide

Step 6: Advanced configurations.

The serial device server offers many more advanced functions including:

• The Alerts & Logging: Alerts facility monitors the serial port, user logins, and

managed devices (network hosts, UPS, PDU, etc). A broad selection of trigger

events (such as data patterns, temperature, or battery levels) can be speciﬁed.

When triggered, a warning e-mail, SMS, Nagios®, or SNMP alert is sent to a

nominated destination.

• Extensive management of UPSs and RPCs using Open Source NUT and Power-

man tools. The Manage: Power facility enables both administrators and regu-

lar users to monitor and control attached PDU power strips, and servers with

embedded IPMI BMCs.

• Historical logs of all communications with serial and network attached man-

aged devices, system activity, UPS and PDU power status, environmental sta-

tus, etc. The level of logging is set as ports and devices are conﬁgured. Alerts

& Logging: Port Log allows this history to be saved locally or remotely. Logs

can be viewed from the Status and Manage menus.

SDT Connector

On the CD-ROM you will nd the SDT Connector software tool. Once you have

conﬁgured the serial device server, this tool provides you with secure, point-and-

click access to the serial device server and all the attached devices.

Refer to the provided SDT Connector Quick Start or the user manual on your

CD-ROM for details on remote management of the serial device server and

connected devices.

Port Share

On the CD-ROM, you will also nd PortShare software, which enables applica-

tions on your Windows®or Linux®PC/server/virtual server to control serial port

devices attached to a remote LES1101A-R2 serial device server.

To use PortShare, conﬁgure the LES1101A-R2 serial port in console server mode

and specify the appropriate protocol to be used (either RFC2117 or RAW).

Refer to the provided PortShare Quick Start or the user manual on your

CD-ROM for more details.

Page 7

724-746-5500 | blackbox.com

NOTES

BL A C K B OX®

Black Box Tech Support: FREE! Live. 24/7.

Tech support the

way it should be.

Great tech support is just 30 seconds away at

724-746-5500 or blackbox.com.

724-746-5500 | blackbox.com

About Black Box

Black Box Network Services is your source for an extensive range of networking

and infrastructure products. You’ll find everything from cabinets and racks and

power and surge protection products to media converters and Ethernet switches

all supported by free, live 24/7 Tech support available in 30 seconds or less.

LES1101A-R2 Quick Start Guide, version 2

Andere Handbücher für LES1101A-R2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Server Handbücher

Black Box

Black Box LES1202A Bedienungsanleitung

Black Box

Black Box SW549A-R28 Bedienungsanleitung

Black Box

Black Box LS4103A Bedienungsanleitung

Black Box

Black Box LES1108A Bedienungsanleitung

Black Box

Black Box LES302A Bedienungsanleitung

Black Box

Black Box LES424A Bedienungsanleitung

Black Box

Black Box Advanced Console Server Bedienungsanleitung

Black Box

Black Box LES4011 Bedienungsanleitung

Black Box

Black Box CDUNM10 Bedienungsanleitung

Black Box

Black Box LES401A Bedienungsanleitung

Black Box

Black Box iCOMPEL ICC LG WEBOS 3 Bedienungsanleitung

Black Box

Black Box ME0008A-ME1 Bedienungsanleitung

Black Box

Black Box LES1108A Bedienungsanleitung

Black Box

Black Box LES1102A Bedienungsanleitung

Black Box

Black Box leS1116a Bedienungsanleitung

Black Box

Black Box LES431A Bedienungs- und Wartungsanleitung

Black Box

Black Box Usb Peripheral Server/5 Bedienungsanleitung

Black Box

Black Box LES1108A Bedienungsanleitung

Black Box

Black Box LS1016A Bedienungsanleitung

Black Box

Black Box ServShield RM470A-R2 Bedienungsanleitung

Black Box

Black Box LWS401A Bedienungsanleitung

Black Box

Black Box LES421A Bedienungsanleitung

Black Box

Black Box LES1208A-R2 Bedienungsanleitung

Black Box

Black Box LES431A Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung