Black Box LBS216AE-R3 Bedienungsanleitung

16 Ports Nway Fast Ethernet Switch

User’s Manual

- -

FCC Warning

This device has been tested and found to comply with limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses and radiates radio

frequency energy and, if not installed and used in accordance with the

user’s manual, may cause interference in which case user will be

required to correct the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product

may cause radio interference in which case the user many be required

to take adequate measures.

- -

Table Of Contents

Chapter 1 ............................................................................................1

Introduction ....................................................................................1

Key Features ...................................................................................2

Chapter 2 ...........................................................................................3

Package Contents ............................................................................3

Chapter 3 . ..........................................................................................4

Front Panel Layout .......................................................................4

A. 16 RJ-45 10/100Mbps Switch Ports ....................................4

B. LED Indicators Of 16 Port 10/100Mbps Switch .................4

C. LED Definitions ..................................................................4

•Power LED ....................................................................4

•10/ 100M LED …………..……………………..………4

•Link/ACT LED ……………………………………..….4

Real Panel Layout .........................................................................5

A. AC Input ..............................................................................5

Chapter 4 . ..........................................................................................5

Rack Mounting ...............................................................................5

Chapter 5 . ................................................................................. 6

Installation ......................................................................................6

A. How to connect the Switch to PCs, servers, and other network

devices ..............................................................................6

B. How to Up-Link the Switch to a Switch or a Hub ............7

Chapter 6 ...........................................................................................8

Technical Specifications ...............................................................8

Appendix ………………………………………………………... ...10

A. ANSI/TIA/EIA-568-A PLUG & Twisted-pair Cable ........10

B. EIA568A pin assignment ...................................................10

C. Recommend CAT5 UTP specifications .............................10

-1-

Chapter 1

16 Ports Nway Fast Ethernet Switch

Introduction

The Switch provides 16 10/100Mbps ports. It was designed for easy

installation and high performance in an environment where traffic on

the network and the number of user increasing continuously.

The 19-inch standard rack-mount size was specifically designed for

ROBO (Remote Office & Branch Office) and medium to large

workgroups. The Switch can be installed where space is limited;

moreover it provides smooth network migration and easy upgrade to

network capacity.

- -

Key Features

16 Ports 10/100Base-T/TX Auto-negotiation and

Auto-MDIX Switch.

Built-in storage of 8K MAC addresses.

19-inch Rack-mount size 1 U high design.

Support Auto MDIX crossover capabilities.

Broadcast storm control

Store & Forward switching methods

Flow control fully supported:

Half-duplex mode Æback-pressure flow control.

Full duplex mode Æ802.3x pause frame flow control.

Provided Non-blocking & Non-head-of-line blocking full

wire speed forwarding.

Auto-learning of networking configurations

Provided front panel reset button

Status LEDs: Power, 10/100M, Link/Activity And

Full/Half-duplex

Smart plug & play

- -

Chapter 2

Package Contents

Before you start to install the Switch, please verify your package that

contains the following items:

One Fast Ethernet Switch

Rack-mount Kit For Rack Installation

One Power Cord

One User’s Manual

Note: If any of these items is found missing or damaged, please

contact your local supplier for replacement.

- -

Chapter 3

Front Panel Layout

A. 16 RJ-45 10/100Mbps Switch Ports

There are 1~16 RJ-45 connectors on the front panel for connecting to

servers, workstation or other network devices. The Switch provides 16

10/100Mbps switching ports that could sense the 10/100M speed and

negotiate Full/Half-duplex mode automatically. These switching

ports allow users connect the Switch to 10Base-T and 100Base-TX

devices.

B. LED Indicators of 16 Port 10/100Mps Switch

LED Color Status Description No. Of LED

Power Yellow On Power on 1

On Port is on the 100M status 16 (1~16)10/100M Green

Off Port is on the 10M status 16 (1~16)

On 10/100Mbps port for connection 16 (1~16)LINK/ACT. Green

Flashing 10/100Mbps for data activating 16 (1~16)

C. LED Definitions

Power LED

On The unit is powered on and ready for use.

Off The unit is powered off.

10/100M LED

On The port is on the 100Mbps status.

Off The port is on the 10Mbps status.

LINK/ACT LED

On The port is ready for 10/100Mbps connection.

Flashing The data is transmitted or received on the port.

- -

Rear Panel Layout

A AC input.

AC input (90-260V/AC, 50-60Hz) UL Safety.

Chapter 4

Rack Mounting

Optional Rack-mounting brackets are available to mount Switch in

standard EIA 19-inch rack. 16 port 10/100Mbps Switch is supplied

with two mounting brackets and eight screws. And please assemble

according to the following steps.

First, put the Switch on the flat surface. Locate the mounting brackets

on the sides of the Switch with the mounting holes on each.

Next, insert the screw through the bracket and into the bracket

mounting holes in the Switch. Then, place the Switch in to 19-inch

rack.

- -

Chapter 5

Installation

Note: The Switch supports the AUTO-MDIX function. Just make sure

the twisted-pair cables meet the ANSI/EIA/TIA

568A(straight-through) or 568B(crossover) specification.

A. How to connect the Switch to PCs, servers, and other network

devices

Connect straight-through twisted-pair cable (Cat. 5) to the Switch

and PCs, servers and other network devices. Then the network

environment can be built easily as the following figure showed.

- -

B. How to UP-Link the Switch to a Switch or a Hub

Use CAT5 twisted pair cable to connect the Switch to another Switch

or Hub on any port. Don’t worry about to use straight-through cable or

crossover cable. The switch support AUTO-MDIX on all port.

Chapter 6

Inhaltsverzeichnis

Andere Black Box Schalten Handbücher

Black Box

Black Box Code Operated Switch-16 Bedienungsanleitung

Black Box

Black Box ServSwitch Duo IPC KV6216FA-R2 Bedienungsanleitung

Black Box

Black Box Wizard IP Plus ServSwitchTM Bedienungsanleitung

Black Box

Black Box SS4P-SH-DVI-UCAC-P Bedienungsanleitung

Black Box

Black Box LH8050A Bedienungsanleitung

Black Box

Black Box SERVSWITCH Series Montage- und Wartungsanleitung

Black Box

Black Box KV9604A Bedienungsanleitung

Black Box

Black Box SW056A Bedienungsanleitung

Black Box

Black Box PI523A Multi-Port Spooler II Bedienungsanleitung

Black Box

Black Box SM025A-FFF Bedienungsanleitung

Black Box

Black Box SW177A Bedienungsanleitung

Black Box

Black Box SW546A Bedienungsanleitung

Black Box

Black Box KV1702A Bedienungsanleitung

Black Box

Black Box Switch Bedienungsanleitung

Black Box

Black Box 26633 Bedienungsanleitung

Black Box

Black Box MT760A Bedienungsanleitung

Black Box

Black Box ServSwitch SW4007A-USB-PLUS Bedienungsanleitung

Black Box

Black Box LGB5028A Bedienungsanleitung

Black Box

Black Box SW1020A Bedienungsanleitung

Black Box

Black Box LB9002A-SC-R3 Bedienungsanleitung

Black Box

Black Box SW215A Bedienungsanleitung

Black Box

Black Box KVT8CATUV Bedienungsanleitung

Black Box

Black Box LinkUp 5294 Bedienungsanleitung

Black Box

Black Box VSW-HDMI2X1-4K Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung