Black Box FT2550A Bedienungsanleitung

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746

SEPTEMBER 2000

FT2550A

Professional Level and

Template Tool

CUSTOMER SUPPORT INFORMATION

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

PROFESSIONAL LEVEL AND TEMPLATE TOOL

Introduction

Description

The Professional Level and Template Tool is a time-

saving device that makes installing “old work” electrical

boxes easy and efficient.

This tool will help the professional audio and security

installer, the telecommunication installer, the

professional electrician, and the “do-it-yourselfer”

accurately mark and cut precise holes in paneling or

drywall. It can be used to mark a single- or dual-gang

openings for electrical boxes.

The tool includes both vertical and horizontal leveling

vials so the tool can be squared in either orientation.

The Professional Level and Template Tool is perfect for

leveling electrical panel boxes, thermostats, pictures,

shelves, tables, and many other items.

TRADEMARKS: Any trademarks mentioned in

this manual are acknowledged to be the property

of the trademark owners.

PROFESSIONAL LEVEL AND TEMPLATE TOOL

Features

• Lightweight, durable, and inexpensive.

• Solid one-piece injection-molded plastic.

• Non-slip extruded rubber on the underside.

• Two leveling vials for horizontal and vertical

orientations.

• Works with all types of 2x2 and 4x4 old work

electrical boxes.

• UV protection to prevent damage from heat and

sun.

PROFESSIONAL LEVEL AND TEMPLATE TOOL

Using the Level and Tool

1. Grip the tool by the vertical vial housing on side B.

2. Place the tool on the wall where the electrical box

is to be located.

3. Adjust the template until the horizontal vial

indicates the template tool is level.

4. For single-gang boxes, trace the template tool’s

four outside edges on the right side of the box

(side A). For dual-gang boxes, trace the outside of

side A and side B. Some electrical boxes require a

square cutout (hole), so the corner material must

be removed.

PROFESSIONAL LEVEL AND TEMPLATE TOOL

5. Use an appropriate saw (for example, a drywall

saw for drywall) to cut out an opening for the

outlet box. (Cut away the corners first, then all

other material. Cut along the trace line from step

4.) The tool works with all types of electrical boxes

and low-voltage cable plates. For small low-voltage

boxes/plates, trace the tool, then saw along the

inside of the trace line. (Small boxes/plates only:

don’t cut your trace line.)

PROFESSIONAL LEVEL AND TEMPLATE TOOL

6. Feed 10" to 15" of wire/cable through the new

opening in the wall.

7. Insert the cable through the opening in the back

of the electrical box under the clamp shoe.

8. Insert the electrical box/plate into the opening in

the wall. Tighten diagonal screws to secure swing

clamps to the inside wall. (If installing a low-

voltage cable plate, insert it in the wall opening

and bend the tabs.)

9. Proceed with the wiring per device instructions.

Inhaltsverzeichnis

Andere Black Box Werkzeuge Handbücher

Black Box

Black Box VT-101 Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung

Goobay

Goobay 97790 Bedienungsanleitung