Black Widow Security BW 700 Bedienungsanleitung

Congratulations on your purchase of the Factory Keyless

Upgrade security system. Your Factory Keyless Upgrade is

manufactured in the U.S.A. and designed by leading security

experts using the latest state of the art technology.

Items Supplied with the Factory Keyless Entry

• Receiver and control module

• Valet/override switch

• Wiring harness, fuseholder & fuse

• LED status indicator

• Siren*

• Shock sensor*

* NOT INCLUDED WITH “E” MODELS

OWNER S MANUAL

SERIES 700/700E

FACTORY KEYLESS UPGRADE

The Factory Keyless Upgrade is designed to interface with an

existing factory keyless entry system, converting it to a full

security system.

Arming Operation:

To Arm the system, press the lock button on the factory remote.

The horn/siren will chirp once.

The parking lights will flash once (optional).

The doors will lock.

The LED will turn on solid for 2 seconds, then begin flashing

slowly. Once the LED starts flashing the system will be fully

armed.

Disarming Operation:

To Disarm the system,press the unlock button on the factory remote.

The horn/siren will chirp twice.

The parking lights will flash twice (optional).

The doors will unlock.

The LED will stop flashing.

Passive Arming:

The passive arming feature may be selected selected during

installation to keep the vehicle secure in the event the user

forgets to arms the system upon exiting the vehicle. After the

ignition is turned off and the last door is closed, the led will flash

rapidly signifying that the system will arm in 30 seconds. After 30

seconds the sytem will arm as described under Arming Operation,

but the doors will not lock.

Valet Mode:

In the event the vehicle requires servicing, washing, etc., the Valet

Mode can be activated to disable the alarm, while still allowing the

keyless entry feature to operate. The Valet Mode will also disable

the system’s passive arming feature (if programmed for passive

arming). To enter Valet Mode:

Turn the ignition key on.

Press and hold the valet/override switch for approximately 5

seconds.

The LED will turn on solid indicating the system is inValet Mode.

To exitValet Mode repeat the procedure above. The LED will turn

off indicating the system has exited Valet Mode.

Emergency Override

In the event the remote transmitter is lost or stolen, the

Emergency Override feature may be used to deactivate the

system. To override the system:

Turn the ignition key on.

Press and hold the valet/override switch for approximately 5

seconds.

The LED will turn off indicating the system is disarmed.

LED Status Modes:

Valet = Solid

Pre-Arm State = Solid for 2 seconds

Armed = Slow flash

Disarmed = Off

Passive Arming Sequence = Rapid flash

System triggered while away = Slow double flash

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Widow Security Sicherheitssystem Handbücher

Black Widow Security

Black Widow Security BW RAS 120 Bedienungsanleitung

Black Widow Security

Black Widow Security BW-1600 Bedienungsanleitung

Black Widow Security

Black Widow Security BW 690 Bedienungsanleitung

Black Widow Security

Black Widow Security BW 752 Bedienungsanleitung

Black Widow Security

Black Widow Security BW RAS 130 Bedienungsanleitung

Black Widow Security

Black Widow Security BW 690-C Bedienungsanleitung

Black Widow Security

Black Widow Security BW FM 6150 Bedienungsanleitung

Black Widow Security

Black Widow Security BW FM 100 Bedienungsanleitung

Black Widow Security

Black Widow Security BW 690 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung