Black Widow Security BW FM Net Bedienungsanleitung
Arm/Disarm
1-
2 - Remote Start/Off
2&3 - Clock Set
2&3- Alarm Clock Set
2&3- Remote Start
2&3Timer Set
3 - Trunk Aux.
4 - Aux. 2
5 - Confirm Status
5- Illuminate
5 -Display
1- ARM/DISARM/PANIC Button - To arm
or disarm the system, press button 1.To activate the panic
feature, press and hold button 1 for three seconds.
2- START Button - To start the vehicle, press and
hold button 2 for two seconds. To shut down the vehicle,
press and hold button 2 for two seconds.
3- TRUNK/AUX 1 Button - To activate the trunk
output, press and hold button 3 for two seconds.
4- AUXILIARY 2 Output - To activate the Aux.
2output, press and hold button 4 for two seconds.
5- CONFIRMATION Button - To check current
status of the system, press button 5. The current status of the
system will be displayed & illuminated on the transmitter.
Arm -
The display will show
icon and the ani-
mated icon to
confirm arming. Lights
will flash once.
Press
Disarm -
The display will show
and to confirm
disarming the animat-
ed .
Lights will flash twice.
Press
TRANSMITTER OPERATIONS
Transmitter Functions
1
Button 1
FM 2-WAY TRANSMITTER
Transmitter Functions
Engine Run -
When the engine starts and con-
tinues to run, the icon will
be displayed, and the icon will
remain displayed.
Start -
The display will
indicate the ignition is
turned on and the
engine is going to
crank.
Press
Aux. 2 Output -
The display will show
to confirm the
Auxiliary 2 Output.
Press
Trunk -
The display will show
and flash this icon
opening to con-
firm.
Press
Status
Confirmation
Press and Hold to
toggle to the
appropriate feature.
Release at the
desired status func-
tion:
CON - Confirm
Alarm or Remote
Start Status.
AM
Press & Hold
Continue to hold
Button 5:
SND - Transmitter Alert
Tones ON/OFF (Repeating
the cycle and releasing at
SND turns on or off)
Button 3
Button 2
Button 4
Button 5
2
Continue to hold
Button 5:
CHP- Feature not available
Continue to hold
Button 5:
PSV- Feature not available
Continue to hold
Button 5:
LPG- Feature not available
Door -
If a door is opened while the sys-
tem is armed, the display will
show .
Hood -
If the hood or trunk is opened
while the system is armed, the
icon will show and the
lights will flash.
Panic -
The display will show
when the Arm/Disarm button is
held to enter the Panic mode.
Low Battery -
When the transmitter battery
needs replacement, the display
will flash the icon.
Shock Sensor -
The display will show Shock and
flash the animated icon to
indicate shock sensor triggering.
Warn Away -
If the warning stage is triggered,
the icon will flash.
Set Clock -
Press and hold but-
tons 2 & 3 for 2 sec-
onds.The transmitter
will beep twice and
the display will show
. Change
hour by pressing but-
ton 2; change minute
by pressing button 3.
Press button #5 (Confirm Status) to set.The transmitter will
play a tune to indicate new time is set.
Press & Hold
Set Alarm Clock
Press and hold but-
tons 2 & 3 until the
transmitter beeps
three times and the
alarm clock icon
appears. Confirm the
same way as setting
clock.
Turning Off Alarm Clock -
Press and hold buttons 2 & 3 until the transmitter beeps
three times and the alarm clock icon appears. Press transmit-
ter button 1.The icon will disappear and the alarm will be
turned off.
Continue to Hold
Set Start Timer -
Press and hold buttons
2 & 3 until the trans-
mitter beeps four
times and the fan icon
appears. Set the
start timer the same
way as setting the
clock.The fan icon will
remain displayed.
Turning Off Start Timer -
Press and hold buttons 2 & 3 until the transmitter beeps four
times and the alarm clock icon appears. Press button 1.The icon
will disappear and the alarm will be turned off.
Continue to Hold
Buttons 2&3
Transmitter Functions
3
Low Battery Indication
Alarm Trigger Indications
64-FMNET Rev. 2 12-02
Connecting FM 2-way Kit to System Module
4
Valet Mode -
The display will show to
confirm entering the Valet mode.
Lock (Valet) -
If the doors are locked with the
transmitter in Valet mode, the dis-
play will show to confirm
locking.
Unlock (Valet) -
If the doors are unlocked with the
transmitter in Valet mode, the dis-
play will show the icon to
confirm unlock.
Transmitter Functions
Valet Indications
Inhaltsverzeichnis
Andere Black Widow Security Sender Handbücher
Beliebte Sender Handbücher anderer Marken
Dejero
Dejero EnGo 3x Bedienungsanleitung
Rosemount
Rosemount 4600 Bedienungsanleitung
Speaka Professional
Speaka Professional 2342740 Bedienungsanleitung
trubomat
trubomat GAB 1000 Bedienungsanleitung
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Bedienungsanleitung
Rondish
Rondish UT-11 Bedienungsanleitung
